Select Your Vehicle
Request New Vehicle
|First Name *|
|Last Name *|
|Your Email *|
|Tell us about your Vehicle:|
Like all height-based leveling systems, AccuAir's e-Level requires the installation of height based sensors at each of the four corners of the vehicle's suspension. If your vehicle has less than four springs, contact us for a custom programmed ECU. Due to the nature of height sensors, air gauges are not required with the e-Level systems. The e-Level system is accurate within 1/8” so concerns that are often associated with air ride (e.g., uneven/abnormal tire wear, cross-loading) are completely eliminated.
Once installed, you will quickly discover that the e-Level system can take care of your air suspension without needing any input from the driver. For example, the e-Level system will automatically adjust each air spring as-needed to keep the vehicle perfectly leveled at the current preset height at all times. While driving, the vehicle must be out of tolerance for more than 45 seconds before a correction will be made, so no need to worry about they system adjusting while you’re cornering. AccuAir has programmed the e-Level system to avoid unnecessary corrections while driving by detecting scenarios like stopping, turning, and accelerating. AccuAir didn't stop there- the e-Level continues to learn the vehicle's characteristics even after the initial calibration. It becomes more accurate as time goes on while also accommodating for wear on suspension parts such as bushings and dampers. Other features such as optional "Rise on Start" and plug-n-play wireless control via your Smart Phone or keyfob provide the user friendliness that you would expect from an OEM-quality system.
AccuAir's e-Level systems include a digital pressure sensor that allows you to set your tank pressure cutoff to 150 PSI, 175 PSI, or 200 PSI. The digital pressure sensor also unlocks the e-Level’s built-in compressor protection feature which prevents overheating by automatically killing power going to your compressors in the event that your tank does not reach the target pressure within the system's expected time frame. Likewise, the system monitors your vehicle’s battery voltage and will automatically disable your compressor(s) should voltage drop below 11.5V.
AccuAir e-Level with RockerSwitch Features:
- (3) User Definable height-based presets
- RideMonitor Mode
- Easy "All Down" Functionality
- Manual Control Mode for each bag (individually or front/rear pairs)
- Accurate to within 1/8"
- Simple, yet effective controller interface can be installed in many OEM locations
- Optional Rise-on-Start
- Automatic System Calibration
- User Definable System Sensitivity
- User Definable Compressor ON/OFF Pressure Setting
- Plug-n-Play Compatibility with the AccuAir iLevel Wireless Controller
This product has been reviewed 0 times.
Share your thoughts with the community
- There are no customer reviews yet, be the first to review this product!
Ask an Expert!
|First Name *|
|Last Name *|
|Email Address *|
|Phone Number *|
|Contact Method *||
|What questions do you have? *|