free shipping*
Select a Vehicle

You have no items in your shopping cart.

Select Your Vehicle (Can't find yours? Let us know!)

Has been added to your cart!


Threaded fittings are essential in every air ride management setup. Threaded fittings are commonly used for the ports on air tanks and as adapters to make use of other fittings that are not the correct size for the port in mind. Here you'll find reducer bushings, couplers, tees, plugs and some assorted threaded options like air tool fittings. If you have any questions about any of these fittings or need a recommendation on which ones you should purchase, don't hesitate to contact a Bag Riders air ride specialist for more info!


Set Ascending Direction


Items 1 to 10 of 20 total

  1. 1
  2. 2
  1. Viair Safety Valve

    This safety valve will automatically release air from your tank if the pressure surpasses the rating of the safety valve (175 PSI, 200 PSI or 250 PSI). A safety valve can also be used to conveniently relieve pressure from your tank by pulling the pin upward. Just thread the fitting into a port on your tank and you're done!
  2. Viair Drain Cock

    Drain cocks provide a convenient way to drain your tank without having to remove any fittings.
  3. Tire Chuck

    Since you already have a tank full of compressed air, you might as well run air tools off of it right? Pair this tire chuck with an air tool hose to be able to fill your vehicle's tires!
  4. Stainless Steel Allen Plug

    This allen plug has the same functionality as your standard hex plug, but in a sleeker form.
  5. Parker Street Tee

    Street tees are used to connect multiple components into one female NPT port. Female NPT on two ends and male NPT on the other.
  6. Parker Street Elbow

    The Parker Street Elbow is a 90ยบ brass fitting with male NPT threads on one end and female NPT threads on the other.
  7. Parker Reducer Bushing

    Reducer bushings are used to decrease the size of a female NPT port. There are many uses for reducer bushings but they are commonly used to step down the ports on an air tank.
  8. Parker Hex Plug

    The Parker Hex Plug is just that.. A plug! These fittings are typically used to close off unused tank ports.
  9. Parker Hex Nipple

    The Parker Hex Nipple features two male NPT ends which are perfect for mating two components together. These fittings are commonly used to connect water traps to tank ports.
  10. Parker Female Tee

    This female tee from Parker provides three female NPT connections. Great for making your own unique fitting.
Set Ascending Direction


Items 1 to 10 of 20 total

  1. 1
  2. 2