RideTech's TruTurn front kit is specifically designed for the 2nd Gen Chevrolet Camaro and Pontiac Firebird. This kit includes an upgraded steering system with StrongArms control arms, steering arms, spindles, a center link bracket, and tie rod assemblies.
These early cars had very poor suspension geometry where the tires lean outward around turns, the bumpsteer is bad, and there is little room to run a wide wheel because the OEM steering arm interferes with the inside of the wheel.
The TruTurn system resolves all of these issues. The tires now lean into the turn, the bumpsteer is under 0.50" through 5" of suspension travel, and you now have the clearance to run up to a 10" wide wheel with a 275mm tire.Includes
- (2) Spindles - taller overall to improve the camber gain
- (2) Steering arms - designed to eliminate bump steer, improve Ackerman angle, and allow clearance for up to 8" wide wheel with 6" backspacing
- (2) Tie rod assemblies - integrates with your new steering arms and centerlink to provide a true "no fab" bolt on steering assembly
- (2) StrongArms - incorporates an adjustable spherical bearing for stability, and dropped cross shaft to improve camber gain