My Cart
Search
 
20% off PRO Control Systems
20% Off PRO Control Systems
 
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle

Search results for: 'm3' - Page 165

Items 3937-3960 of 7939

Set Descending Direction
Products Browse a collection of products en
  1. AccuAir e-Level+ Air Ride Kit for Lexus RX350 RX450h L 4th Gen
    AccuAir Air Ride Kit for Lexus RX 4th Gen
    Rating:
    90%
    100 2
    $3,955.00
    AccuAir Air Ride Kit for Lexus RX 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus RX 4th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus AL20} AccuAir e-Level+ Air Ride Kit USD 3955.00 https://schema.org/NewCondition https://schema.org/InStock
  2. AccuAir e-Level+ Air Ride Kit for Lexus RX350 RX450h 3rd Gen
    AccuAir Air Ride Kit for Lexus RX350 RX450h 3rd Gen
    Rating:
    90%
    100 2
    $4,155.00
    AccuAir Air Ride Kit for Lexus RX350 RX450h 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus RX350 RX450h 3rd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus AL10} AccuAir e-Level+ Air Ride Kit USD 4155.00 https://schema.org/NewCondition https://schema.org/InStock
  3. AccuAir e-Level+ Air Ride Kit for Hyundai Elantra 6th Gen
    AccuAir Air Ride Kit for Kia Forte 3rd Gen & Hyundai Elantra 6th Gen
    Rating:
    90%
    100 2
    $3,183.00
    AccuAir Air Ride Kit for Kia Forte 3rd Gen & Hyundai Elantra 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Kia Forte 3rd Gen & Hyundai Elantra 6th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Hyundai AD} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock
  4. AccuAir e-Level+ Air Ride Kit for Chevrolet Corvette C8
    AccuAir Air Ride Kit for Chevy Corvette C8
    Rating:
    90%
    100 2
    $3,955.00
    AccuAir Air Ride Kit for Chevy Corvette C8 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Chevy Corvette C8 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM Y8} AccuAir e-Level+ Air Ride Kit USD 3955.00 https://schema.org/NewCondition https://schema.org/InStock
  5. AccuAir e-Level+ Air Ride Kit for BMW i8 I12
    AccuAir Air Ride Kit for BMW i8
    Rating:
    90%
    100 2
    $6,135.00
    AccuAir Air Ride Kit for BMW i8 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the BMW i8 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW I12} AccuAir e-Level+ Air Ride Kit USD 6135.00 https://schema.org/NewCondition https://schema.org/InStock
  6. AccuAir e-Level+ Air Ride Kit for BMW G20 G21 3 Series
    AccuAir Air Ride Kit for BMW G2X 3 Series
    Rating:
    90%
    100 2
    $3,183.00
    AccuAir Air Ride Kit for BMW G2X 3 Series https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the BMW G2X 3 Series is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW G20} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock
  7. AccuAir e-Level+ Air Ride Kit for Mazda 3 4th Gen
    AccuAir Air Ride Kit for Mazda 3 4th Gen
    Rating:
    90%
    100 2
    $3,755.00
    AccuAir Air Ride Kit for Mazda 3 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mazda 3 4th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mazda BP} AccuAir e-Level+ Air Ride Kit USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock
  8. Air Lift Performance 3S Air Ride Kit
    Slam Specialties Analog Air Ride Kit for Mazda 3 4th Gen
    Rating:
    0%
    100 0
    $3,345.00
    Slam Specialties Analog Air Ride Kit for Mazda 3 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Mazda 3 4th Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Mazda BP} Slam Specialties Analog Air Ride Kit USD 3345.00 https://schema.org/NewCondition https://schema.org/InStock
  9. Bag Riders Manual Air Ride Kit
    Bag Riders Manual Air Ride Kit for Mazda 3 4th Gen
    Rating:
    100%
    100 8
    $2,520.00
    Bag Riders Manual Air Ride Kit for Mazda 3 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Mazda 3 4th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Mazda BP} Bag Riders Manual Air Ride Kit USD 2520.00 https://schema.org/NewCondition https://schema.org/InStock
  10. AccuAir e-Level+ Air Ride Kit
    AccuAir Air Ride Kit for Alfa Romeo 4C
    Rating:
    90%
    100 2
    $5,145.00
    AccuAir Air Ride Kit for Alfa Romeo 4C https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Alfa Romeo 4C is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Alfa 4C} AccuAir e-Level+ Air Ride Kit USD 5145.00 https://schema.org/NewCondition https://schema.org/InStock
  11. Porsche 95b Macan BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Macan 95B
    Rating:
    0%
    100 0
    $1,410.00
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Macan 95B https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Porsche Macan 95B are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Macan 95B aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Porsche 95B} BC Racing BR Type Coilover Kit (Extreme Low) USD 1410.00 https://schema.org/NewCondition https://schema.org/InStock
  12. Porsche 95b Macan BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers for Porsche Macan 95B
    Rating:
    0%
    100 0
    $1,410.00
    BC Racing BR Series Coilovers for Porsche Macan 95B https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Coilovers for the Porsche Macan 95B are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Porsche Macan 95B, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Macan 95B aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Porsche 95B} BC Racing BR Type Coilover Kit USD 1410.00 https://schema.org/NewCondition https://schema.org/InStock
  13. GM Alpha 3 6th Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Chevy Camaro 6th Gen
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Chevy Camaro 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_3.jpg BC Racing BR Series Extreme Low Coilovers for the Chevy Camaro 6th Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Chevy Camaro 6th Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {GM Alpha 3} BC Racing BR Type Coilover Kit (Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  14. GM Alpha 3 6th Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers for Chevy Camaro 6th Gen
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Chevy Camaro 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_3.jpg BC Racing BR Series Coilovers for the Chevy Camaro 6th Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Chevy Camaro 6th Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Chevy Camaro 6th Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {GM Alpha 3} BC Racing GM Alpha 3 BR Type Coilover Kit USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  15. VW 7p AWD BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Cayenne 2nd Gen & VW Touareg 7P
    Rating:
    0%
    100 0
    $1,560.00
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Cayenne 2nd Gen & VW Touareg 7P https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Porsche Cayenne 2nd Gen & VW Touareg 7P are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Cayenne 2nd Gen & VW Touareg 7P aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW 7P} BC Racing BR Type Coilover Kit (Extreme Low) USD 1560.00 https://schema.org/NewCondition https://schema.org/InStock
  16. VW 7p AWD BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers for Porsche Cayenne 2nd Gen & VW Touareg 7P
    Rating:
    0%
    100 0
    $1,410.00
    BC Racing BR Series Coilovers for Porsche Cayenne 2nd Gen & VW Touareg 7P https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Coilovers for the Porsche Cayenne 2nd Gen & VW Touareg 7P are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Porsche Cayenne 2nd Gen & VW Touareg 7P, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Cayenne 2nd Gen & VW Touareg 7P aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW 7P} BC Racing VW 7P BR Type Coilover Kit USD 1410.00 https://schema.org/NewCondition https://schema.org/InStock
  17. Nissan Leaf 2nd Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Nissan Leaf 2nd Gen
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Nissan Leaf 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Nissan Leaf 2nd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Nissan Leaf 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Nissan ZE1} BC Racing BR Type Coilover Kit (Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  18. Nissan Leaf 2nd Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers for Nissan Leaf 2nd Gen
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Nissan Leaf 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Coilovers for the Nissan Leaf 2nd Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Nissan Leaf 2nd Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Nissan Leaf 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Nissan ZE1} BC Racing BR Type Coilover Kit USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  19. Honda CR-V 5th Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Honda CR-V 5th Gen
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Honda CR-V 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Honda CR-V 5th Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Honda CR-V 5th Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Honda RW} BC Racing BR Type Coilover Kit (Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  20. Honda CR-V 5th Gen BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers for Honda CR-V 5th Gen
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Honda CR-V 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Coilovers for the Honda CR-V 5th Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Honda CR-V 5th Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Honda CR-V 5th Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Honda RW} BC Racing Honda RW BR Type Coilover Kit USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  21. BC Racing BR Type Coilover Kit Extreme Low for Subaru Crosstrek GT
    BC Racing BR Series Coilovers (Extreme Low) for Subaru Crosstrek GT
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Subaru Crosstrek GT https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_12.jpg BC Racing BR Series Extreme Low Coilovers for the Subaru Crosstrek GT are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Subaru Crosstrek GT aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR16942 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  22. BC Racing BR Type Coilover Kit for Subaru Crosstrek GT
    BC Racing BR Series Coilovers for Subaru Crosstrek GT
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Subaru Crosstrek GT https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_12.jpg BC Racing BR Series Coilovers for the Subaru Crosstrek GT are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Subaru Crosstrek GT, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Subaru Crosstrek GT aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR16941 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  23. Chevrolet Volt 2nd Gen FWD BC Racing BR Type Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for Chevy Cruze & Volt 2nd Gen
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Chevy Cruze & Volt 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_13.jpg BC Racing BR Series Extreme Low Coilovers for the Chevy Cruze & Volt 2nd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Chevy Cruze & Volt 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR16964 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  24. Chevrolet Volt 2nd Gen FWD BC Racing BR Type Coilover Kit | Bag Riders
    BC Racing BR Series Coilovers for Chevy Cruze & Volt 2nd Gen
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Chevy Cruze & Volt 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_13.jpg BC Racing BR Series Coilovers for the Chevy Cruze & Volt 2nd Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Chevy Cruze & Volt 2nd Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Chevy Cruze & Volt 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR16963 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
Page