Search results for: '240sx' - Page 2
Products Browse a collection of products en
AccuAir ENDO Air Ride Kit for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan S13 Silvia & 240SX with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan S13 Silvia & 240SX. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan S13} AccuAir ENDO Air Ride Kit USD 4495.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s13-silvia-240sx-accuair-endo-air-ride-kit.html
Bag Riders PRO Air Ride Kit for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the Nissan S13 Silvia & 240SX is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Nissan S13} Bag Riders PRO Air Ride Kit USD 2969.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s13-240sx-180sx-silvia-bag-riders-pro-air-ride-kit.html
TruHart AirPlus Air Suspension for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart-airplus-air-suspension_1.jpg The Truhart AirPlus air suspension for the Nissan S13 Silvia & 240SX is the ultimate entry-level solution for enthusiasts looking to achieve that flawless, bagged stance on a budget. Engineered to be simple, yet versatile, the AirPlus suspension features fully threaded shock bodies, fixed damping settings, and camber plates (dependent on platform) to help you dial in that perfect fitment. Fully Threaded Shock Bodies Because the shock bodies are fully threaded top to bottom, you're able to get both that perfect ride height and air out stance by raising or lowering the bottom mount of the shock. This feature is found on all cars with four-corner struts. On cars with a separate spring and shock in the rear, a threaded rear shock is provided to assist with your air out fitment. Fixed Damping Settings Damping on the Truhart AirPlus kit is fixed rather than adjustable. This is the main trade-off that keeps the setup priced lower than other higher tier lines. For a daily driven or show focused build that doesn't need dial-in damping control, this keeps things simple and affordable while still delivering a proper air ride setup. Kit Includes Truhart AirPlus front suspension Truhart AirPlus rear suspension (4) 1/4" tube - 1/8" BSPT compression elbows *Actual product not displayed BR06356 USD 1485.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s13-240sx-truhart-airplus-air-ride-suspension-kit.html
Bag Riders Manual Air Ride Kit for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan S13 Silvia & 240SX is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan S13} Bag Riders Manual Air Ride Kit USD 2245.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s13-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan S13 Silvia & 240SX is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan S13} Slam Specialties Analog Air Ride Kit USD 3070.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s13-slam-specialties-analog-air-ride-kit.html
D2 Racing Front Camber Plates for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2.jpg Fine-tune your Nissan S13 Silvia & 240SX's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Nissan S13 Silvia & 240SX's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Nissan S13 Silvia & 240SX for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Nissan S13 Silvia & 240SX, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05227 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s13-d2-racing-front-camber-plate-set.html
BC Racing BR Series Coilovers (Extreme Low) for Nissan S14 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_7.jpg BC Racing BR Series Extreme Low Coilovers for the Nissan S14 Silvia & 240SX are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Nissan S14 Silvia & 240SX aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR05031 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s14-bc-racing-br-type-coilover-kit-extreme-low.html
Maxload P1 Pro Air Ride Kit for Nissan S14 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3023/maxload-p1-pro-complete-air-ride-kit.jpg The Maxload P1 Pro for the Nissan S14 Silvia & 240SX is a digital, pressure-based management that features 3 programmable presets and a dedicated air-out button as well as individual, four corner, air spring control. The P1 Pro features a gamepad-style controller with a full color screen that displays all four of your bag pressures as well as tank pressure with a visual representation the tank's current air capacity. There is also a free smartphone app available to turn your handheld device into a wireless controller. If you're looking for a similar air management without the gamepad controller, be sure to check out our Bag Riders PRO Management Package. Maxload P1 Pro Features 3 programmable pressure-based presets & a dedicated all-down button Gamepad-style controller, with color screen and backlit buttons 4 Corner & Tank pressure readout Individual, 4-Corner control Automatic calibration Rise-on-start functionality Free smartphone app for wireless control What's Included P1 Pro Air Management system P1 Pro Manifold P1 Pro Gamepad Controller Manifold Wiring Harness Manifold Power Harness Compressor Power Harness Water trap Mounting hardware Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan S14} Maxload P1 Pro Air Ride Kit USD 3185.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s14-silvia-240sx-maxload-p1-pro-air-ride-kit.html
BC Racing BR Series Coilovers (Extreme Low) for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_7.jpg BC Racing BR Series Extreme Low Coilovers for the Nissan S13 Silvia & 240SX are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Nissan S13 Silvia & 240SX aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR05029 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s13-bc-racing-br-type-coilover-kit-extreme-low.html
Bag Riders PRO Pre-Configured Air Ride Kit - Nissan 240SX & Silvia S13Bag Riders PRO Pre-Configured Air Ride Kit - Nissan 240SX & Silvia S13 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_52.jpg This pre-configured Bag Riders PRO air ride kit for the S13 Nissan 240SX, 180SX, & Silvia is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. We have paired this with our Super Low Air Suspension for the ultimate package, allowing you to drive low, and park even lower. Includes: Bag Riders Super Low Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty BR27176 USD 4415.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-pro-pre-configured-air-ride-kit-nissan-240sx-silvia-s13.htmlSale Price $4,415.00 Maxload P1 Pro Air Ride Kit for Nissan S13 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3023/maxload-p1-pro-complete-air-ride-kit.jpg The Maxload P1 Pro for the Nissan S13 Silvia & 240SX is a digital, pressure-based management that features 3 programmable presets and a dedicated air-out button as well as individual, four corner, air spring control. The P1 Pro features a gamepad-style controller with a full color screen that displays all four of your bag pressures as well as tank pressure with a visual representation the tank's current air capacity. There is also a free smartphone app available to turn your handheld device into a wireless controller. If you're looking for a similar air management without the gamepad controller, be sure to check out our Bag Riders PRO Management Package. Maxload P1 Pro Features 3 programmable pressure-based presets & a dedicated all-down button Gamepad-style controller, with color screen and backlit buttons 4 Corner & Tank pressure readout Individual, 4-Corner control Automatic calibration Rise-on-start functionality Free smartphone app for wireless control What's Included P1 Pro Air Management system P1 Pro Manifold P1 Pro Gamepad Controller Manifold Wiring Harness Manifold Power Harness Compressor Power Harness Water trap Mounting hardware Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan S13} Maxload P1 Pro Air Ride Kit USD 3185.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s13-silvia-240sx-maxload-p1-pro-air-ride-kit.html
TruHart StreetPlus Coilovers for Nissan S14 S15 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart_coilovers_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg TruHart StreetPlus Coilovers for the Nissan S14 S15 Silvia & 240SX are the ideal solution for the budget-minded enthusiast looking for adjustable ride height coilovers that lower the car and sharply improve handling without breaking the bank. Built with fully threaded strut bodies and an independently adjustable lower mount, this twin-tube coilover kit lets you dial in ride height without sacrificing shock travel or spring preload. Fully Threaded Strut Bodies Independently adjustable lower mounts let you fine-tune your Nissan S14 S15 Silvia & 240SX's ride height from approximately 1.5" to 4.0" of drop from factory height, without sacrificing shock travel or spring preload. The twin-tube shock design delivers a controlled, responsive ride whether you're cruising or pushing your car through a corner. Fixed Damping Settings Fixed damping settings keep the ride sporty yet livable - comfortable enough as a lowering kit for daily driving, capable enough for light track and autocross duty. Built to Last Zinc-plated shock bodies, powder-coated lower mounts, and anodized lock rings/top mounts protect your Nissan S14 S15 Silvia & 240SX's coilovers from rust and corrosion. Camber plates are included with most applications, and every kit is backed by TruHart's 2-year manufacturer warranty. Features of the StreetPlus Coilovers Ride height adjusts from approximately 1.5" to 4.0" of drop from factory height Twin-tube shock design for a controlled, responsive ride Independently adjustable lower mounts for ride height adjustment Zinc-plated shock bodies, powder-coated lower mounts, and anodized lock rings/top mounts for rust and corrosion resistance Camber plates included with most applications 2-year manufacturer warranty Kit Includes TruHart StreetPlus front coilovers TruHart StreetPlus rear coilovers *Actual product not displayed BR08881 USD 666.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s14-truhart-streetplus-coilover-kit.html
D2 Racing RS Coilovers for Nissan S14 S15 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_2.jpg The D2 Racing RS Coilover Kit for the Nissan S14 S15 Silvia & 240SX is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Nissan S14 S15 Silvia & 240SX a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR07593 USD 1035.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s14-240sx-d2-racing-rs-coilover-kit-d-ni-33-rs.html
D2 Racing Air Suspension for Nissan S14 S15 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Nissan S14 S15 Silvia & 240SX features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Nissan S14 S15 Silvia & 240SX: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Nissan S14 S15 Silvia & 240SX. *Actual Product Not Displayed BR03276 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-s14-d2-racing-air-ride-suspension-kit.html
TruHart AirPlus Air Suspension for Nissan S14/S15 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart-airplus-air-suspension_1.jpg The Truhart AirPlus air suspension for the Nissan S14/S15 Silvia & 240SX is the ultimate entry-level solution for enthusiasts looking to achieve that flawless, bagged stance on a budget. Engineered to be simple, yet versatile, the AirPlus suspension features fully threaded shock bodies, fixed damping settings, and camber plates (dependent on platform) to help you dial in that perfect fitment. Fully Threaded Shock Bodies Because the shock bodies are fully threaded top to bottom, you're able to get both that perfect ride height and air out stance by raising or lowering the bottom mount of the shock. This feature is found on all cars with four-corner struts. On cars with a separate spring and shock in the rear, a threaded rear shock is provided to assist with your air out fitment. Fixed Damping Settings Damping on the Truhart AirPlus kit is fixed rather than adjustable. This is the main trade-off that keeps the setup priced lower than other higher tier lines. For a daily driven or show focused build that doesn't need dial-in damping control, this keeps things simple and affordable while still delivering a proper air ride setup. Kit Includes Truhart AirPlus front suspension Truhart AirPlus rear suspension (4) 1/4" tube - 1/8" BSPT compression elbows *Actual product not displayed BR06357 USD 1485.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240-sx-truhart-airplus-air-ride-suspension-kit.html
D2 Racing Front Camber Plates for Nissan S14 S15 Silvia & 240SX https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Nissan S14 S15 Silvia & 240SX's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Nissan S14 S15 Silvia & 240SX's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Nissan S14 S15 Silvia & 240SX for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Nissan S14 S15 Silvia & 240SX, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05228 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s14-d2-racing-front-camber-plate-set.html
Bag Riders PRO Pre-Configured Air Ride Kit - Nissan 240SX & Silvia S14/S15Bag Riders PRO Pre-Configured Air Ride Kit - Nissan 240SX & Silvia S14/S15 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_50.jpg This pre-configured Bag Riders PRO air ride kit for the S14/S15 Nissan 240SX, 200SX, & Silvia is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. We have paired this with our Super Low Air Suspension for the ultimate package, allowing you to drive low, and park even lower. Includes: Bag Riders Super Low Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty BR27177 USD 4415.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-pro-pre-configured-air-ride-kit-nissan-240sx-silvia-s14-s15.htmlSale Price $4,415.00
Truhart Rear Traction ArmsTruhart Rear Traction Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_r33_r34_s13_s14_240sx_truhart_rear_traction_arms.png These rear traction arms from Truhart allow for fine-tuned adjustments to the rear suspension geometry of your vehicle. By changing the length of the arms, you change the position and pitch of which the suspension rotates upon which in turn changes the amount of 'anti-squat' for the rear. Although the adjustment is minimal, it can change the behavior of the vehicle during weight transfer and will eliminate wheel hop when launching from a standstill. BR04211 USD 121.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-r32-s13-s14-240sx-truhart-rear-traction-arms.html$121.50
Truhart Rear Toe Control ArmsTruhart Rear Toe Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_skyline_r33_r34_gtr_truhart_rear_toe_control_arms_1.png This rear toe arm kit from Truhart is designed to bring your alignment back into spec after lowering your Nissan. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR04207 USD 112.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-240sx-s13-skyline-r32-300zx-truhart-rear-toe-control-arms.html$112.50 Truhart Front Tension Rods (With Pillowball) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_240sx_s13_skyline_r32_300zx_truhart_front_tension_rods.png Truhart's front tension rods are designed to give you a more direct feel while cornering and eliminate the steering play that is normally associated with the OEM soft rubber bushings. The adjustable length allows for fine tuning your alignment to get your lowered car back into proper suspension geometry. These tension rods from Truhart are a direct replacement for your OEM tension rods. BR04212 USD 148.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/truhart-front-tension-rods-with-pillowball.html
Truhart Rear Upper Control ArmsTruhart Rear Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_skyline_r32_s13_240sx_truhart_rear_upper_control_arms.png These rear upper control arms from Truhart are essential to dialing in your rear fitment. With more camber adjustment than stock arms and heavy duty bushings, the stability of your lowered car will be increased greatly. Truhart's rear upper control arms are a direct replacement for the OEM arms. BR04208 USD 144.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-skyline-r32-240sx-s13-z32-truhart-rear-upper-control-arms.html$144.00
Truhart Rear Upper Control ArmsTruhart Rear Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_r33_r34_240sx_s14_truhart_rear_upper_control_arms.png These rear upper control arms from Truhart are essential to dialing in your rear fitment. With more camber adjustment than stock arms and heavy duty bushings, the stability of your lowered car will be increased greatly. Truhart's rear upper control arms are a direct replacement for the OEM arms. BR04210 USD 144.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-r33-r34-s14-240sx-truhart-rear-upper-control-arms.html$144.00
Truhart Rear Toe Control ArmsTruhart Rear Toe Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_skyline_r33_r34_gtr_truhart_rear_toe_control_arms.png This rear toe arm kit from Truhart is designed to bring your alignment back into spec after lowering your Nissan. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR04209 USD 103.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-r33-r34-240sx-s14-truhart-rear-toe-control-arms.html$103.50
Page
- Page Previous
- Page 1
- You're currently reading page 2

