Search results for: '350z' - Page 2
Products Browse a collection of products en
BC Racing BR Series True Rear Coilovers (Extreme Low) for Nissan 350Z & Infiniti G35 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_9.jpg BC Racing BR Series Extreme Low Coilovers for the Nissan 350Z & Infiniti G35 are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Nissan 350Z & Infiniti G35 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR05501 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-z33-infiniti-g35-v35-bc-racing-br-type-true-rear-coilover-kit-extreme-low.html
Bag Riders GT Series Front Air Suspension for Nissan 350Z & Infiniti G35 V35 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-gt-series-air-suspension-temp-wishbone-front_1_1_1_1_1.jpg Bag Riders GT Series front air suspension for the Nissan 350Z & Infiniti G35 V35 is designed to give customers the best bang for their buck. Our kits include features we believe every set of suspension should have, including 32-way damping adjustment, height adjustable, threaded shock bodies, and camber plates on applicable vehicles. It's backed by a 3-year limited warranty, as well as our own tech support line. If you're looking for a more premium product, packed with even more features and technology, check and see if we have a Bag Riders Super Low kit available for your vehicle. Kit Includes: Bag Riders GT Series front air suspension (2) Damping adjustment knobs (2) Leader lines (2) 1/4” tube - 1/8” NPT compression male straights (1) Spanner wrench 3-year limited warranty BR27402 USD 1096.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-gt-series-front-air-suspension-nissan-350z-infiniti-g35-v35.html
Bag Riders GT Series Rear Air Suspension for Nissan 350Z & Infiniti G35 V35 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-gt-series-air-suspension-temp-separate-rear_4.jpg Bag Riders GT Series rear air suspension for the Nissan 350Z & Infiniti G35 V35 is designed to give customers the best bang for their buck. Our kits include features we believe every set of suspension should have, including 32-way damping adjustment, height adjustable, threaded shock bodies, and camber plates on applicable vehicles. It's backed by a 3-year limited warranty, as well as our own tech support line. If you're looking for a more premium product, packed with even more features and technology, check and see if we have a Bag Riders Super Low kit available for your vehicle. Kit Includes: Bag Riders GT Series rear air suspension (2) Damping adjustment knobs (2) 1/4” tube - 1/8” NPT compression elbows (1) Spanner wrench 3-year limited warranty BR27403 USD 1096.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-gt-series-rear-air-suspension-nissan-350z-infiniti-g35-v35.html
Truhart Front Roll Center Adjusters https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/h/th-n606__99304.jpg These Truhart front roll center adjusters are designed to correct suspension geometry after the vehicle as been lowered. The uneven length of the suspension arms cause toe adjustments to occur drastically during braking suspension 'squat'. Truhart's roll center adjusters make up for the travel in the suspension arms and return the suspension geometry to it's correct starting point. This allows alignment and steering to remain more consistent and predictable during aggressive driving. BR17730 USD 162.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-infiniti-g35-truhart-front-roll-center-adjusters.html
Truhart Rear Traction ArmsTruhart Rear Traction Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_r33_r34_s13_s14_240sx_truhart_rear_traction_arms_1.png These rear traction arms from Truhart allow for fine-tuned adjustments to the rear suspension geometry of your vehicle. By changing the length of the arms, you change the position and pitch of which the suspension rotates upon which in turn changes the amount of 'anti-squat' for the rear. Although the adjustment is minimal, it can change the behavior of the vehicle during weight transfer and will eliminate wheel hop when launching from a standstill. BR04213 USD 130.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-infiniti-g35-truhart-rear-traction-arms.html$130.50
Truhart Front Camber KitTruhart Front Camber Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_350z_infiniti_g35_truhart_front_camber_kit.png Truhart's front camber kit allows you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber kit offers an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR04178 USD 288.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-infiniti-g35-truhart-front-camber-kit.html$288.00
Koni Sport Rear ShocksKoni Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_sport_shocks_nissan_350z_infiniti_g35.jpg Koni is the industry leader of adjustable damping shocks for both daily drivers and weekend warriors alike. The adjustable damping feature allows these shocks to pair well with stiffer lowering springs or air springs and gives you the ability to dial in your comfort level. Need instructions for adjusting your Koni Sport Shocks? Look no further! We’ve got you covered in our Air Ride F.A.Q. BR01278 USD 625.74 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-z33-koni-sport-rear-shocks.html$625.74 Truhart Rear Lower Control Arms (With Pillowball) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_350z_infiniti_g35_truhart_rear_lower_control_arms.png These rear lower control arms from Truhart are made from high grade steel and feature heavy duty pillowball bushings that enhance the stability of your lowered vehicle. Truhart's lower control arms are a direct replacement for the OEM arms and will help to stiffen up the rear of your vehicle. BR04195 USD 216.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-infiniti-g35-truhart-rear-lower-control-arms-with-pillowball.html
Truhart Rear Camber KitTruhart Rear Camber Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_350z_z33_g35_infiniti_maxima_altima_truhart_rear_camber_kit.png Truhart's rear camber kit allows you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber kit offers an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR04179 USD 117.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-350z-infiniti-g35-z33-maxima-altima-truhart-rear-camber-kit.html$117.00 Universal Air Front Kit (For OEM Struts) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_retrofit_front_air_ride_kit_apnd_1.jpg These bags and brackets from Universal Air are designed to fit over your OEM struts. Includes: (2) Steel upper brackets (2) Steel lower brackets (2) Aero Sport bags (2) 1/4” DOT approved fittings (2) 3/8” DOT approved fittings (1) Hardware pack BR01835 USD 510.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-z33-z34-universal-air-front-kit-for-oem-struts.html
Universal Air Front Brackets (OEM Struts) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/3/5/350_oem_front_bracket.jpg These brackets from Universal Air are designed to fit the front OEM struts of the Nissan 350Z, 370Z and the Infiniti G35, G37. Includes: (2) Upper brackets (2) Lower brackets (4) Bolts Compatible with: Universal Air Aero Sport Universal Air Aero Power Sport Universal Air Air House 2 Aero Sport BR00982 USD 70.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/universal-air-nissan-350z-370z-infiniti-g35-g37-front-brackets.html
Universal Air Rear Kit (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/a/uas_nissan_z33_z34_awd_rear_brackets_1_.jpg These bags and brackets from Universal Air are designed to replace your rear coil springs. Includes: (2) Steel upper brackets (2) Steel Lower brackets (2) Air House 2 bags (2) 1/4” DOT approved fittings (2) 3/8” DOT approved fittings (1) Hardware pack BR01836 USD 325.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-z33-z34-universal-air-rear-kit.html
Universal Air Rear Brackets https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/3/5/350z_rear_brackets.jpg These brackets from Universal Air are designed to work with the rear of the Nissan 350Z, 370Z and Infiniti G35, G37. Includes: (2) Upper brackets (2) Lower brackets (8) Bolts Compatible with: Universal Air Air House 2 BR00865 USD 150.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/universal-air-nissan-350z-370z-infiniti-g35-g37-rear-brackets.html
Page
- Page Previous
- Page 1
- You're currently reading page 2


