My Cart
Search
 
Summer Sale 10% off Air Suspension Sale
Free Air Compressor
 
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle

Search results for: '1/4' - Page 20

Items 229-240 of 344

Set Descending Direction
Products Browse a collection of products en
  1. bc_racing_coilovers_02
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Cayenne 1st Gen & VW Touareg 7L
    Rating:
    0%
    100 0
    $1,560.00
    BC Racing BR Series Coilovers (Extreme Low) for Porsche Cayenne 1st Gen & VW Touareg 7L https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Porsche Cayenne 1st Gen & VW Touareg 7L are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Cayenne 1st Gen & VW Touareg 7L aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW 7L} BC Racing BR Type Coilover Kit (Extreme Low) USD 1560.00 https://schema.org/NewCondition https://schema.org/InStock
  2. TruHart AirPlus Air Suspension for Toyota Camry 3rd/4th Gen & Lexus ES
    TruHart AirPlus Air Suspension for Toyota Camry 3rd/4th Gen & Lexus ES
    Rating:
    0%
    100 0
    $1,485.00
    TruHart AirPlus Air Suspension for Toyota Camry 3rd/4th Gen & Lexus ES https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart-airplus-air-suspension_1.jpg The Truhart AirPlus air suspension for the Toyota Camry 3rd/4th Gen & Lexus ES is the ultimate entry-level solution for enthusiasts looking to achieve that flawless, bagged stance on a budget. Engineered to be simple, yet versatile, the AirPlus suspension features fully threaded shock bodies, fixed damping settings, and camber plates (dependent on platform) to help you dial in that perfect fitment. Fully Threaded Shock Bodies Because the shock bodies are fully threaded top to bottom, you're able to get both that perfect ride height and air out stance by raising or lowering the bottom mount of the shock. This feature is found on all cars with four-corner struts. On cars with a separate spring and shock in the rear, a threaded rear shock is provided to assist with your air out fitment. Fixed Damping Settings Damping on the Truhart AirPlus kit is fixed rather than adjustable. This is the main trade-off that keeps the setup priced lower than other higher tier lines. For a daily driven or show focused build that doesn't need dial-in damping control, this keeps things simple and affordable while still delivering a proper air ride setup. Kit Includes Truhart AirPlus front suspension Truhart AirPlus rear suspension (4) 1/4" tube - 1/8" BSPT compression elbows *Actual product not displayed BR15595 USD 1485.00 https://schema.org/NewCondition https://schema.org/InStock
  3. bc_racing_coilovers_02
    BC Racing BR Series Coilovers for Lexus GS IS RC 350 AWD 4GS 3IS
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_9.jpg BC Racing BR Series Coilovers for the Lexus GS IS RC 350 AWD 4GS 3IS are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Lexus GS IS RC 350 AWD 4GS 3IS, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Lexus GS IS RC 350 AWD 4GS 3IS aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR07094 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  4. truhart_coilovers
    TruHart StreetPlus Coilovers for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)
    Rating:
    0%
    100 0
    $666.00
    TruHart StreetPlus Coilovers for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart_coilovers_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg TruHart StreetPlus Coilovers for the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) are the ideal solution for the budget-minded enthusiast looking for adjustable ride height coilovers that lower the car and sharply improve handling without breaking the bank. Built with fully threaded strut bodies and an independently adjustable lower mount, this twin-tube coilover kit lets you dial in ride height without sacrificing shock travel or spring preload. Fully Threaded Strut Bodies Independently adjustable lower mounts let you fine-tune your Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)'s ride height from approximately 1.5" to 4.0" of drop from factory height, without sacrificing shock travel or spring preload. The twin-tube shock design delivers a controlled, responsive ride whether you're cruising or pushing your car through a corner. Fixed Damping Settings Fixed damping settings keep the ride sporty yet livable - comfortable enough as a lowering kit for daily driving, capable enough for light track and autocross duty. Built to Last Zinc-plated shock bodies, powder-coated lower mounts, and anodized lock rings/top mounts protect your Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)'s coilovers from rust and corrosion. Camber plates are included with most applications, and every kit is backed by TruHart's 2-year manufacturer warranty. Features of the StreetPlus Coilovers Ride height adjusts from approximately 1.5" to 4.0" of drop from factory height Twin-tube shock design for a controlled, responsive ride Independently adjustable lower mounts for ride height adjustment Zinc-plated shock bodies, powder-coated lower mounts, and anodized lock rings/top mounts for rust and corrosion resistance Camber plates included with most applications 2-year manufacturer warranty Kit Includes TruHart StreetPlus front coilovers TruHart StreetPlus rear coilovers *Actual product not displayed BR13587 USD 666.00 https://schema.org/NewCondition https://schema.org/InStock
  5. D2 Racing RS Coilovers for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)
    D2 Racing RS Coilovers for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)
    Rating:
    0%
    100 0
    $1,035.00
    D2 Racing RS Coilovers for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_1.jpg The D2 Racing RS Coilover Kit for the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR07492 USD 1035.00 https://schema.org/NewCondition https://schema.org/InStock
  6. Toyota Camry 3rd 4th 5th Lexus ES D2 Racing Lowering Springs
    D2 Racing Lowering Springs for Toyota Camry 3rd 4th 5th Gen & Lexus ES
    Rating:
    0%
    100 0
    $200.00
    D2 Racing Lowering Springs for Toyota Camry 3rd 4th 5th Gen & Lexus ES https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_lowering_springs_11_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Want to lower your Toyota Camry 3rd 4th 5th Gen & Lexus ES, but on a budget? D2 Racing's lowering springs are the easiest way to get a lower ride height without breaking the bank. Designed as a direct replacement for your Toyota Camry 3rd 4th 5th Gen & Lexus ES's factory springs, these lowering springs work with your factory dampers, so no need to upgrade your entire suspension to transform your stance. Improved Handling, Progressive Rate Design These D2 Racing lowering springs for the Toyota Camry 3rd 4th 5th Gen & Lexus ES are engineered to improve handling characteristics by reducing ride height while maintaining exceptional ride quality through a progressive rate spring design. The result is a comfortable ride under normal conditions with firmer, more controlled handling during aggressive driving - giving you reduced body roll and sharper cornering without sacrificing everyday comfort. Premium Materials & Construction Each spring is cold-wound from 55 chrome silicon steel for a consistent spring rate and long-term durability, then manufactured in an ISO 9001 and TUV approved facility. A corrosion-resistant coating helps extend the life of your springs, so your Toyota Camry 3rd 4th 5th Gen & Lexus ES stays lowered and looking sharp for the long haul. Easy, Direct-Fit Installation D2 Racing Lowering Springs are designed to install using your vehicle's stock mounting points, with no modification required. They're tuned to work with factory shocks, though pairing with performance shocks is recommended for the best handling results. What's Included Direct replacement for factory springs Compatible with factory or performance shocks/dampers Progressive rate spring design Cold-wound 55 chrome silicon steel construction Corrosion-resistant coating No-modification, stock mounting point installation Backed by D2 Racing's limited lifetime warranty against manufacturing defects *Actual product not displayed BR14504 USD 200.00 https://schema.org/NewCondition https://schema.org/InStock
  7. BC Racing BR Type Coilover Kit Air to Coil for VW Touareg Mk1/Audi Q7
    BC Racing BR Series Coilovers for Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion)
    Rating:
    0%
    100 0
    $1,410.00
    BC Racing BR Series Coilovers for Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Coilovers for the Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion), built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW 7L} BC Racing BR Type Coilover Kit (Air to Coil Conversion) USD 1410.00 https://schema.org/NewCondition https://schema.org/InStock
  8. AccuAir e-Level+ Air Ride Kit for Lexus IS 300 3rd GS 350 4th Gen
    AccuAir Air Ride Kit for Lexus GS IS RC 350 300 4GS 3IS Fork Mount
    Rating:
    90%
    100 2
    Sale Price $3,220.00
    AccuAir Air Ride Kit for Lexus GS IS RC 350 300 4GS 3IS Fork Mount https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus GS IS RC 350 300 4GS 3IS Fork Mount is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XE30 Fork} AccuAir e-Level+ Air Ride Kit USD 3220.00 https://schema.org/NewCondition https://schema.org/InStock
  9. d2_racing_Wishbone-Sleeve_and_SS&S-DB
    D2 Racing Air Suspension for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)
    Rating:
    0%
    100 0
    $2,160.00
    D2 Racing Air Suspension for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_1.jpg D2 Racing air suspension for the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Lexus GS IS RC 350 300 4GS 3IS (Fork Mount): D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Lexus GS IS RC 350 300 4GS 3IS (Fork Mount). *Actual Product Not Displayed BR05449 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock
  10. AccuAir e-Level+ Air Ride Kit for Lexus IS 300 3rd GS 350 4th Gen AWD
    AccuAir Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS
    Rating:
    90%
    100 2
    Sale Price $3,495.00
    AccuAir Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus GS IS RC 350 AWD 4GS 3IS is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XE30 AWD} AccuAir e-Level+ Air Ride Kit USD 3495.00 https://schema.org/NewCondition https://schema.org/InStock
  11. D2 Racing RS Coilovers for Lexus GS IS RC 350 AWD 4GS 3IS
    D2 Racing RS Coilovers for Lexus GS IS RC 350 AWD 4GS 3IS
    Rating:
    0%
    100 0
    $1,305.00
    D2 Racing RS Coilovers for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_3.jpg The D2 Racing RS Coilover Kit for the Lexus GS IS RC 350 AWD 4GS 3IS is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Lexus GS IS RC 350 AWD 4GS 3IS a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR13628 USD 1305.00 https://schema.org/NewCondition https://schema.org/InStock
  12. d2_racing_Wishbone-Sleeve_and_SS&S-DB
    D2 Racing Air Suspension for Lexus GS IS RC 350 AWD 4GS 3IS
    Rating:
    0%
    100 0
    $2,160.00
    D2 Racing Air Suspension for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_1.jpg D2 Racing air suspension for the Lexus GS IS RC 350 AWD 4GS 3IS features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Lexus GS IS RC 350 AWD 4GS 3IS: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Lexus GS IS RC 350 AWD 4GS 3IS. *Actual Product Not Displayed BR05451 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock
Page