Search results for: 'accuair' - Page 21
Products Browse a collection of products en
AccuAir ENDO Air Ride Kit for Honda Ridgeline 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Ridgeline 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Ridgeline 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YK2} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-ridgeline-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Ridgeline 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Ridgeline 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Ridgeline 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YK1} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-ridgeline-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Pilot 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Pilot 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Pilot 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF1} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Cadillac CTS 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Cadillac CTS 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Cadillac CTS 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM Sigma 2} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/cadillac-cts-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for GM F-Body 1993-2002 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your GM F-Body 1993-2002 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your GM F-Body 1993-2002. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM F4} AccuAir ENDO Air Ride Kit USD 5475.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-f-body-1993-2002-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for GM F-Body 1982-1992 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your GM F-Body 1982-1992 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your GM F-Body 1982-1992. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM F3} AccuAir ENDO Air Ride Kit USD 4460.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-f-body-1982-1992-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for GM F-Body 1970-1981 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your GM F-Body 1970-1981 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your GM F-Body 1970-1981. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM F2} AccuAir ENDO Air Ride Kit USD 4950.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-f-body-1970-1981-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for GM F-Body 1967-1969 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your GM F-Body 1967-1969 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your GM F-Body 1967-1969. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM F1} AccuAir ENDO Air Ride Kit USD 8700.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-f-body-1967-1969-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Ford Explorer 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Ford Explorer 6th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ford Explorer 6th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ford U625} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-explorer-6th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for BMW F48 X1AccuAir ENDO Air Ride Kit for BMW F48 X1 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your BMW F48 X1 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your BMW F48 X1. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW F48} AccuAir ENDO Air Ride Kit USD 4750.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-f48-x1-accuair-endo-air-ride-kit.html$4,750.00
AccuAir ENDO Air Ride Kit for BMW F39 X2AccuAir ENDO Air Ride Kit for BMW F39 X2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your BMW F39 X2 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your BMW F39 X2. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW F39} AccuAir ENDO Air Ride Kit USD 4810.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-f39-x2-accuair-endo-air-ride-kit.html$4,810.00
AccuAir ENDO Air Ride Kit for BMW F25 X3AccuAir ENDO Air Ride Kit for BMW F25 X3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your BMW F25 X3 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your BMW F25 X3. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW F25} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-f25-x3-accuair-endo-air-ride-kit.html$5,260.00
AccuAir ENDO Air Ride Kit for Audi A1 8XAccuAir ENDO Air Ride Kit for Audi A1 8X https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Audi A1 8X with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Audi A1 8X. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Audi 8X} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/audi-a1-8x-accuair-endo-air-ride-kit.html$4,870.00 AccuAir ENDO Air Ride Kit for Acura MDX 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura MDX 4th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura MDX 4th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura YD8} AccuAir ENDO Air Ride Kit USD 4810.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-mdx-4th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura MDX 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura MDX 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura MDX 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura YD3} AccuAir ENDO Air Ride Kit USD 4810.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-mdx-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura TLX 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura TLX 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura TLX 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura UB5} AccuAir ENDO Air Ride Kit USD 4750.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-tlx-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura RDX 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura RDX 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura RDX 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura TC1} AccuAir ENDO Air Ride Kit USD 4750.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-rdx-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura RDX 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura RDX 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura RDX 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura TB3} AccuAir ENDO Air Ride Kit USD 4750.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-rdx-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura RL 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura RL 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura RL 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura KA9} AccuAir ENDO Air Ride Kit USD 4700.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-rl-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura Legend 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura Legend 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura Legend 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura KA7} AccuAir ENDO Air Ride Kit USD 4700.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-legend-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir Air Ride Kit for Mazda CX-30 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mazda CX-30 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mazda DM} AccuAir e-Level+ Air Ride Kit USD 3795.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mazda-cx-30-1st-gen-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Honda CR-V 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda CR-V 6th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RS} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-6th-gen-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Mazda CX-5 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mazda CX-5 2nd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mazda KF} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mazda-cx-5-2nd-gen-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Mazda CX-5 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mazda CX-5 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mazda KE} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mazda-cx-5-1st-gen-accuair-e-level-air-ride-kit.html


