Search results for: '1/4' - Page 22
Products Browse a collection of products en
Maxload P2 Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3ISMaxload P2 Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Lexus GS IS RC 350 AWD 4GS 3IS is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Main Wiring Harness Compressor Wiring Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Lexus XE30 AWD} Maxload P2 Air Ride Kit USD 3595.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-gs-is-rc-350-awd-4gs-3is-maxload-p2-air-ride-kit.htmlSale Price $3,595.00
AccuAir ENDO Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3ISAccuAir ENDO Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Lexus GS IS RC 350 AWD 4GS 3IS with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Lexus GS IS RC 350 AWD 4GS 3IS. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XE30 AWD} AccuAir ENDO Air Ride Kit USD 4430.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-gs-is-rc-350-awd-4gs-3is-accuair-endo-air-ride-kit.htmlSale Price $4,430.00 Bag Riders PRO Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the Lexus GS IS RC 350 AWD 4GS 3IS is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Lexus XE30 AWD} Bag Riders PRO Air Ride Kit USD 3250.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-300-3rd-gs-350-4th-gen-awd-bag-riders-pro-air-ride-kit.html
BC Racing BR Series Coilovers (Extreme Low) for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_9.jpg BC Racing BR Series Extreme Low Coilovers for the Lexus GS IS RC 350 AWD 4GS 3IS are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Lexus GS IS RC 350 AWD 4GS 3IS aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR07095 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is250-is350-xe30-awd-bc-racing-br-type-coilover-kit-extreme-low.html
BC Racing BR Series Coilovers (Extreme Low) for Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Porsche Cayenne 1st Gen & VW Touareg 7L (Air to Coil Conversion) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW 7L} BC Racing BR Coilover Kit (Air to Coil - Extreme Low) USD 1560.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-touareg-mk1-bc-racing-br-type-coilover-kit-extreme-low-air-to-coil.html
Maxload Rear Air Suspension for BMW F3X 3/4 Series & F2X 2 Series (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-rear-bags-actual-product-not-displayed_93.jpg Looking to switch over from coilovers to air suspension on your BMW F3X 3/4 Series & F2X 2 Series, but don't want to purchase a completely new suspension system? With the Maxload Rear Air Suspension kit, you can swap the standalone coil springs from rear of your car for these vehicle specific mounting brackets and air springs. These double bellow bags will allow you to slam your vehicle when parked, and you can combine this rear kit with conversion bags for your front struts to complete the package while keeping your current coilovers. Kit Includes: (2) MAXLOAD double bellow bags with integrated mounting brackets (2) 1/4” compression fittings Anodized end caps All required hardware for installation Free technical support BR18455 USD 600.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-3-series-f30-maxload-rear-kit.html
BC Racing BR Series Coilovers (Extreme Low) for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount)BC Racing BR Series Coilovers (Extreme Low) for Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Lexus GS IS RC 350 300 4GS 3IS (Fork Mount) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {Lexus XE30 Fork} BC BR Coilover (Fork Mount Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-gs-rc-bc-racing-br-type-coilover-kit-extreme-low-fork-mount.html$1,345.00
Bag Riders PRO Pre-Configured Air Ride Kit - BMW F3X 3/4 Series & F2X 2 SeriesBag Riders PRO Pre-Configured Air Ride Kit - BMW F3X 3/4 Series & F2X 2 Series https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_98.jpg This pre-configured Bag Riders PRO air ride kit for the F3X BMW 3 and 4 Series & F2X BMW 2 Series is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. You can pair this with either our Super Low Air Suspension for the ultimate package, or GT Series Air Suspension for the best bang-for-your-buck. Includes: Bag Riders Super Low Air Suspension OR Bag Riders GT Series Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! GT Series Features: Threaded, height-adjustable shock bodies 32-way adjustable damping Aluminum bag endcaps Camber plates on applicable vehicles 1-year limited warranty Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty {BMW F30,AWD} Bag Riders PRO Pre-Configured Air Ride Kit USD 3620.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-pro-pre-configured-air-ride-kit-bmw-f3x-3-4-series-f2x-2-series.htmlSale Price $3,620.00
Bag Riders GT Series Air Suspension for BMW F3X 3/4 Series & F2X 2 Series (5 Stud Upper Mount)Bag Riders GT Series Air Suspension for BMW F3X 3/4 Series & F2X 2 Series (5 Stud Upper Mount) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/m/bmw-f30-5-bolt-bag-riders-gt-series-air-suspension-front-and-rear.jpg Bag Riders GT Series air suspension for the BMW F3X 3 and 4 Series cars is designed to give customers the best bang for their buck. Our kits include features we believe every set of suspension should have, including 32-way damping adjustment, height adjustable, threaded shock bodies, and camber plates on applicable vehicles. It's backed by a 3-year limited warranty, as well as our own tech support line. If you're looking for a more premium product, packed with even more features and technology, check and see if we have a Bag Riders Super Low kit available for your vehicle. Kit Includes: Bag Riders GT Series air suspension (4) Damping adjustment knobs (2) Leader lines (2) 1/4” tube - 1/8” NPT male straights (2) 1/4” tube - 1/8” NPT compression elbows (2) Spanner wrenches 3-year limited warranty BR26988 USD 1900.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-gt-series-air-suspension-bmw-f3x-f2x-1-2-3-4-series.html$1,900.00 BC Racing BR Series Coilovers (Extreme Low) for BMW F80 M3 & F82 F83 M4 (3 Stud Top) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_3.jpg BC Racing BR Series Extreme Low Coilovers for the BMW F80 M3 & F82 F83 M4 (3 Stud Top) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW F80 M3 & F82 F83 M4 (3 Stud Top) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {BMW F80} BC Racing BR Coilover Kit (3 Stud Top - Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-f80-f82-m3-m4-bc-racing-br-type-coilover-kit-extreme-low-3-stud.html
Truhart Rear Traction ArmsTruhart Rear Traction Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/n/i/nissan_r33_r34_s13_s14_240sx_truhart_rear_traction_arms_2.png These rear traction arms from Truhart allow for fine-tuned adjustments to the rear suspension geometry of your vehicle. By changing the length of the arms, you change the position and pitch of which the suspension rotates upon which in turn changes the amount of 'anti-squat' for the rear. Although the adjustment is minimal, it can change the behavior of the vehicle during weight transfer and will eliminate wheel hop when launching from a standstill. BR07240 USD 162.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-accord-8th-gen-tsx-truhart-rear-traction-arms.html$162.00
Koni STR.T Rear ShocksKoni STR.T Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_strt_rear_shocks_1_1_1_1_1.jpg Koni's entry level performance STR.T (pronounced "street") shocks are designed to improve handling of lowered vehicles. These STR.T shocks come with slightly higher damping forces than your OE shock which allows them to pair well with stiffer lowering springs or air springs, but they do not feature damping adjustment like Koni's premium "Sport" line. The Koni STR.T shocks provides performance at a value price point and come with a lifetime warranty. BR06177 USD 208.58 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk4-gti-golf-jetta-koni-str-t-rear-shocks.html$208.58


