Search results for: 'accuair' - Page 22

Products Browse a collection of products en

AccuAir Air Ride Kit for Mazda CX-3 1st Gen
Rating:
90%
100 2

$3,183.00

AccuAir Air Ride Kit for Mazda CX-3 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mazda CX-3 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mazda DK} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mazda-cx-3-1st-gen-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Honda CR-V 5th Gen
Rating:
90%
100 2

$3,183.00

AccuAir Air Ride Kit for Honda CR-V 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda CR-V 5th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RW} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-crv-5th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda CR-V 4th Gen
Rating:
90%
100 2

$3,183.00

AccuAir Air Ride Kit for Honda CR-V 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda CR-V 4th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RM} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-crv-4th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda CR-V 3rd Gen
Rating:
90%
100 2

$3,895.00

AccuAir Air Ride Kit for Honda CR-V 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda CR-V 3rd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RE} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-crv-3rd-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Subaru BRZ ZD & Toyota 86 ZN8
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Subaru BRZ ZD & Toyota 86 ZN8 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Subaru BRZ ZD & Toyota 86 ZN8 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Subaru BRZ ZD & Toyota 86 ZN8. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Subaru ZD} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/subaru-brz-zd-toyota-86-zn8-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Tesla Model 3 & Y AWD
Rating:
0%
100 0

$4,910.00

AccuAir ENDO Air Ride Kit for Tesla Model 3 & Y AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Tesla Model 3 & Y AWD with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Tesla Model 3 & Y AWD. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Tesla 3 AWD} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/tesla-model-3-y-awd-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Nissan Sentra 4th Gen
Rating:
0%
100 0

$5,170.00

AccuAir ENDO Air Ride Kit for Nissan Sentra 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Sentra 4th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Sentra 4th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan B14} AccuAir ENDO Air Ride Kit USD 5170.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-4th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Lexus NX 1st Gen
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Lexus NX 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Lexus NX 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Lexus NX 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus AZ10} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-nx-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Cadillac CTS 3rd Gen
Rating:
0%
100 0

$4,870.00

AccuAir ENDO Air Ride Kit for Cadillac CTS 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Cadillac CTS 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Cadillac CTS 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM Alpha 2} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/cadillac-cts-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mazda 3 1st Gen
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Mazda 3 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mazda 3 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mazda 3 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ford C1} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mazda-3-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Dodge Neon 2nd Gen
Rating:
0%
100 0

$5,260.00

AccuAir ENDO Air Ride Kit for Dodge Neon 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Dodge Neon 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Dodge Neon 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Dodge PL2} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/dodge-neon-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Kia Optima/K5 3rd Gen
Rating:
0%
100 0

$4,870.00

AccuAir ENDO Air Ride Kit for Kia Optima/K5 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Kia Optima/K5 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Kia Optima/K5 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Hyundai YF} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/kia-optima-k5-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Kia Sportage 4th Gen & Hyundai Tucson
Rating:
0%
100 0

$5,260.00

AccuAir ENDO Air Ride Kit for Kia Sportage 4th Gen & Hyundai Tucson https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Kia Sportage 4th Gen & Hyundai Tucson with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Kia Sportage 4th Gen & Hyundai Tucson. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Hyundai NM} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/kia-sportage-4th-gen-hyundai-tucson-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Acura TSX & Honda Accord 7th Gen
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Acura TSX & Honda Accord 7th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Acura TSX & Honda Accord 7th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Acura TSX & Honda Accord 7th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda CM} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-tsx-honda-accord-7th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Prelude 4th/5th Gen
Rating:
0%
100 0

$4,405.00

AccuAir ENDO Air Ride Kit for Honda Prelude 4th/5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Prelude 4th/5th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Prelude 4th/5th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda BB} AccuAir ENDO Air Ride Kit USD 4405.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-prelude-4th-5th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda S2000 AP1/AP2
Rating:
0%
100 0

$4,405.00

AccuAir ENDO Air Ride Kit for Honda S2000 AP1/AP2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda S2000 AP1/AP2 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda S2000 AP1/AP2. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda AP} AccuAir ENDO Air Ride Kit USD 4405.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-s2000-ap1-ap2-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Dodge Viper 3rd & 4th Gen
Rating:
0%
100 0

$6,025.84

AccuAir ENDO Air Ride Kit for Dodge Viper 3rd & 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Dodge Viper 3rd & 4th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Dodge Viper 3rd & 4th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Dodge ZB} AccuAir ENDO Air Ride Kit USD 6025.84 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/dodge-viper-3rd-4th-gen-accuair-endo-air-ride-kit.html
AccuAir Air Ride Kit for Mercedes CLK C208
Rating:
90%
100 2

$4,605.00

AccuAir Air Ride Kit for Mercedes CLK C208 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mercedes CLK C208 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes C208} AccuAir e-Level+ Air Ride Kit USD 4605.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-benz-clk-c208-accuair-e-level-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Nissan Kicks 1st Gen
Rating:
0%
100 0

$5,170.00

AccuAir ENDO Air Ride Kit for Nissan Kicks 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Kicks 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Kicks 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan P15} AccuAir ENDO Air Ride Kit USD 5170.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-kicks-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mercedes C-Class W205
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Mercedes C-Class W205 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mercedes C-Class W205 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mercedes C-Class W205. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes W205} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-c-class-w205-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mercedes E-Class S212
Rating:
0%
100 0

$5,260.00

AccuAir ENDO Air Ride Kit for Mercedes E-Class S212 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mercedes E-Class S212 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mercedes E-Class S212. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes S212} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-e-class-s212-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mercedes E-Class C207
Rating:
0%
100 0

$4,198.00

AccuAir ENDO Air Ride Kit for Mercedes E-Class C207 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mercedes E-Class C207 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mercedes E-Class C207. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes C207} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-e-class-c207-accuair-endo-air-ride-kit.html
AccuAir Air Ride Kit for Subaru Legacy & Outback BD/BG/BK
Rating:
90%
100 2

$3,685.00

AccuAir Air Ride Kit for Subaru Legacy & Outback BD/BG/BK https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Subaru Legacy & Outback BD/BG/BK is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Subaru BD} AccuAir e-Level+ Air Ride Kit USD 3685.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/subaru-legacy-outback-bd-bg-bk-forester-sf-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Dodge Charger/Challenger 2005-2010
Rating:
90%
100 2

$3,183.00

AccuAir Air Ride Kit for Dodge Charger/Challenger 2005-2010 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Dodge Charger/Challenger 2005-2010 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Chrysler LX} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chrysler-300-charger-challenger-magnum-accuair-e-level-plus-air-ride-kit.html

Page

Page Previous
Page 20
Page 21
You're currently reading page 22
Page 23
Page 24
Page Next








Tell us about your Vehicle: