Search results for: '1/4' - Page 24

Products Browse a collection of products en

Truhart Rear Upper Camber Arms
Rating:
0%
100 0

$234.00

Truhart Rear Upper Camber Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/_/l/_lexus_l10_rc_xe30_truhart_rear_upper_camber_arms_th-l207.jpg Truhart's rear camber kit allows you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber kit offers an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR13235 USD 234.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-xe30-gs-l10-rc-truhart-rear-upper-camber-arms.html
Truhart Rear Traction Arms (With Pillowball)
Rating:
0%
100 0

$180.00

Truhart Rear Traction Arms (With Pillowball) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/_/l/_lexus_l10_rc_xe30_truhart_rear_traction_arms_with_pillowball_th-l106.jpg These rear traction arms from Truhart allow for fine-tuned adjustments to the rear suspension geometry of your vehicle. By changing the length of the arms, you change the position and pitch of which the suspension rotates upon which in turn changes the amount of 'anti-squat' for the rear. Although the adjustment is minimal, it can change the behavior of the vehicle during weight transfer and will eliminate wheel hop when launching from a standstill. BR13234 USD 180.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-xe30-gs-l10-rc-truhart-rear-traction-arms-with-pillowball.html
Truhart Rear Toe Control Arms
Rating:
0%
100 0

$225.00

Truhart Rear Toe Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/_/l/_lexus_l10_rc_xe30_truhart_rear_toe_control_arms_th-l105.jpg This rear toe arm kit from Truhart is designed to bring your alignment back into spec after lowering your Lexus. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR13233 USD 225.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-xe30-gs-l10-rc-truhart-rear-toe-control-arms.html
Universal Air Rear Kit
Rating:
0%
100 0

$350.00

Universal Air Rear Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/a/uas_lexus_l10_rc_xe30_rear_brackets_1_.jpg These bags and brackets from Universal Air are designed to replace your rear coil springs. Includes: (2) Steel upper brackets (2) Steel Lower brackets (2) Air House 1 bags (2) 1/4” DOT approved fittings (2) 3/8” DOT approved fittings (1) Hardware pack BR13188 USD 350.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-l10-rc-xe30-universal-air-rear-kit.html
Universal Air Rear Brackets
Rating:
0%
100 0

$160.00

Universal Air Rear Brackets https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/l/e/lexus_l10_rc_xe30_uas_rear_bracket_kit_1.jpg These brackets from Universal Air are designed to fit the rear suspension of the Lexus GS 4th Gen, IS 3rd Gen, and RC 1st Gen models. Includes: (6) mounts (1) hardware pack Compatible with: Universal Air Air House 1 Bags (3/8" NPT Port) BR06376 USD 160.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/universal-air-lexus-gs-4th-is-3rd-rc-rear-bracket-kit.html
AccuAir Pigtail Valve Harness
Rating:
0%
100 0

$49.95

AccuAir Pigtail Valve Harness https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/v/a/valve_harness.jpg The AccuAir Pigtail Valve Harness is the same as the one included when purchasing an AccuAir system. One end has a connector for the back of any AccuAir ECU and the other end can be wired to a manifold or valves of your choice. Be sure to check out the valve harness pinout before starting your install. BR02012 USD 49.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-pigtail-valve-harness.html
Bag Riders GT Series Rear Air Suspension for Lexus GS350, IS350 & RC350
Rating:
0%
100 0

$1,096.00

Bag Riders GT Series Rear Air Suspension for Lexus GS350, IS350 & RC350 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-gt-series-air-suspension-temp-separate-rear_3.jpg Bag Riders GT Series rear air suspension for the Lexus GS350, IS350 & RC350 is designed to give customers the best bang for their buck. Our kits include features we believe every set of suspension should have, including 32-way damping adjustment, height adjustable, threaded shock bodies, and camber plates on applicable vehicles. It's backed by a 3-year limited warranty, as well as our own tech support line. If you're looking for a more premium product, packed with even more features and technology, check and see if we have a Bag Riders Super Low kit available for your vehicle. Kit Includes: Bag Riders GT Series rear air suspension (2) Damping adjustment knobs (2) 1/4” tube - 1/8” NPT compression elbows (1) Spanner wrench 3-year limited warranty BR27397 USD 1096.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-gt-series-rear-air-suspension-lexus-gs350-is350-rc350.html
Universal Air Front Kit (For OEM Struts)
Rating:
0%
100 0

$665.00

Universal Air Front Kit (For OEM Struts) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_lexus_retrofit_front_air_ride_kit_1.jpg These bags and brackets from Universal Air are designed to fit over your OEM struts. Includes: (2) Steel upper brackets (2) Steel lower brackets (2) Aero Sport bags (2) 1/4” DOT approved fittings (2) 3/8” DOT approved fittings (1) Hardware pack BR13194 USD 665.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-l10-xe30-universal-air-front-kit-for-oem-struts.html
Universal Air Front Brackets (OEM Struts)
Rating:
0%
100 0

$160.00

Universal Air Front Brackets (OEM Struts) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/l/e/lexus_l10_xe30_uas_front_braket_kit_2.jpg These brackets from Universal Air are designed to fit the OEM front struts of the Lexus GS 4th Gen and IS 3rd Gen models. Includes: (2) mounts (1) hardware pack Compatible with: Universal Air Aero Sport BR06375 USD 160.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/universal-air-lexus-gs-4th-is-3rd-rc-rear-bracket-kit-oem-struts.html
BC Racing BR Series Coilovers for Ford Flex 2009-2012
Rating:
0%
100 0

$1,195.00

BC Racing BR Series Coilovers for Ford Flex 2009-2012 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the Ford Flex 2009-2012 are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Ford Flex 2009-2012, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Ford Flex 2009-2012 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR13440 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-flex-1st-gen-bc-racing-br-type-coilover-kit.html
RideTech StrongArms Rear Upper Control Arms
Rating:
0%
100 0

$315.00

RideTech StrongArms Rear Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_rear_upper_control_arms_ford_mustang_fox_sn95_3.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06109 USD 315.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/g-body-monte-carlo-malibu-ridetech-strongarms-rear-upper-control-arms.html
RideTech StrongArms Rear Lower Control Arms
Rating:
0%
100 0

$380.00

RideTech StrongArms Rear Lower Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_rear_lower_control_arms_el_camino_chevelle_monte_carlo_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06108 USD 380.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ridetech-strongarms-rear-lower-control-arms.html

Page

Page Previous
Page 22
Page 23
You're currently reading page 24
Page 25
Page 26
Page Next








Tell us about your Vehicle: