Search results for: 'e-level' - Page 26
Products Browse a collection of products en
AccuAir Air Ride Kit for Infiniti Q50 Q60 AWD V37 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Infiniti Q50 Q60 AWD V37 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Infiniti V37 AWD} AccuAir e-Level+ Air Ride Kit USD 3685.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/infiniti-q50-q60-awd-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Scion xA xB & Toyota Yaris 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Scion xA xB & Toyota Yaris 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Scion xB1} AccuAir e-Level+ Air Ride Kit USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/scion-xa-xb-yaris-1st-gen-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Infiniti Q50 Q60 AWD DDS V37 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Infiniti Q50 Q60 AWD DDS V37 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Infiniti V37 AWD DDS} AccuAir e-Level+ Air Ride Kit USD 3685.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/infiniti-q50-q60-awd-dds-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Mitsubishi 3000GT VR4 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mitsubishi 3000GT VR4 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi Z15A AWD} AccuAir e-Level+ Air Ride Kit USD 4155.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mitsubishi-3000gt-dodge-stealth-awd-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for BMW F10 M5 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the BMW F10 M5 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW F10 M5} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-m5-f10-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Mercedes A-Class 4MATIC W177 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Mercedes A-Class 4MATIC W177 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes W177 AWD} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-a-class-4matic-w177-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Lexus GS IS RC 350 AWD 4GS 3IS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus GS IS RC 350 AWD 4GS 3IS is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XE30 AWD} AccuAir e-Level+ Air Ride Kit USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-300-3rd-gs-350-4th-gen-awd-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for BMW F12 F13 M6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the BMW F12 F13 M6 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW F13 M6} AccuAir e-Level+ Air Ride Kit USD 5059.72 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-m6-f12-f13-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Toyota Camry SE 8th Gen & Lexus ES https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Toyota Camry SE 8th Gen & Lexus ES is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Toyota XV70 SE} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-es-xz10-toyota-camry-se-avalon-xx50-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Audi B6 & B7 A4/S4/RS4 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Audi B6 & B7 A4/S4/RS4 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Audi B6/B7} AccuAir e-Level+ Air Ride Kit USD 3795.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/audi-b6-b7-a4-s4-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for VW Golf/GTI/Jetta Mk2 & Corrado https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the VW Golf/GTI/Jetta Mk2 & Corrado is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {VW Mk2/Mk3} AccuAir e-Level+ Air Ride Kit USD 3735.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk2-mk3-golf-gti-jetta-passat-b3-b4-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Lexus GS IS RC 350 300 4GS 3IS Fork Mount https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus GS IS RC 350 300 4GS 3IS Fork Mount is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XE30 Fork} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-is-300-3rd-gs-350-4th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Porsche 911 GT3 RS 991.1 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Porsche 911 GT3 RS 991.1 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Porsche 991.1 GT3 RS} AccuAir e-Level+ Air Ride Kit USD 5145.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/porsche-991-1-gt3-rs-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for GM Tahoe/Yukon/Escalade GMT 920 4WD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the GM Tahoe/Yukon/Escalade GMT 920 4WD is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM T920 4WD} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-tahoe-yukon-escalade-gmt-920-4wd-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for VW R32 Golf R Mk5 Mk6 & Audi S3/TTS Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the VW R32 Golf R Mk5 Mk6 & Audi S3/TTS Mk2 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {VW Mk5/Mk6 AWD} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-r32-mk6-golf-r-audi-tt-quattro-s3-8p-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {VW Mk5/Mk6} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-6-golf-gti-jetta-audi-a3-tt-mk2-accuair-e-level-air-ride-kit.html
AccuAir e+ Connect Wireless Controller https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/c/accuair_e_connect_system.jpg The e+ Connect wireless controller is AccuAir's entry level control system that starts out as a simple, smartphone based, wireless switch box that can be upgraded over time to a full fledged e-Level+ system. By adding the Height+ Upgrade and even a TouchPad+ Controller Upgrade, you can build your way up to one of the most premiere managements on the market. Alternatively, you could opt to use the Pressure+ Upgrade instead of the Height+ upgrade to turn it into a pressure based system. AccuAir's e+ Connect wireless controller is as simple as it gets but you'll need a few extras to get it working, most notably a manifold like the AccuAir VU4 4 Corner Manifold, or the AccuAir ENDO-VT Air Tank if you're looking for a tank with integrated valves. Features: Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Valve pigtail included for use with any brand manifold or individual valves. Battery saver mode that puts the system to sleep after 24 hours Bluetooth 5.0 Over the air updates Additional features with Height+ Upgrade (sold separately): 3 programmable heights Visual display of your height percentage while using the ePlus smartphone app Automatic calibration Additional features with Pressure+ Upgrade (sold separately): 3 programmable pressure presets Visual display of your bag pressures while using the ePlus smartphone app Automatic calibration Includes: AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting Hardware VU4 Manifold Upgrade (optional) AccuAir VU4 1/4" NPT Manifold (6) 1/4" PTC or 3/8" PTC to 1/4" NPT SMC DOT male straights BR14387 USD 524.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-e-plus-connect-wireless-controller.html
AccuAir e+ ECU UpgradeAccuAir e+ ECU Upgrade https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/c/accuair_e-level__ecu_1.jpg AccuAir's e+ ECU Upgrade is for those with an existing e-Level or SwitchSpeed system that want to update to the latest and greatest. This ECU not only looks better than the previous version, but it also has built in Bluetooth which allows you to control your vehicle from your smartphone using AccuAir's ePlus app. Want to spice up your management setup? Now you can change the color of your ECU with adjustable RGB lighting. If you don't already own SwitchSpeed or e-Level, you'll want the complete e+ Connect system which comes with the necessary wiring harness. Features: Use your current e-Level or SwitchSpeed harness to power this ECU Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that puts the system to sleep after 24 hours Bluetooth 5.0 Over the air updates Includes: AccuAir e+ ECU ePlus smartphone app Mounting hardware BR14386 USD 439.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-e-plus-ecu-upgrade.html$439.95 AccuAir TouchPad+ Upgrade https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/c/accuair_e-level__touchpad.jpg AccuAir's Touchpad+ Upgrade is a physical controller that can be added to an existing AccuAir e+ Connect wireless controller. The e+ Connect system comes standard with a smartphone app, so if you're looking to slowly upgrade to the complete AccuAir e-Level+ System, this is the controller for you. AccuAir's updated TouchPad+ has an improved design that features a stainless steel case, compressor status indicator, and cable routing that allows for both handheld and panel mounting. The TouchPad+'s stainless steel case allows for easy mounting to various magnetic phone and controller mounts. The compressor status light on the TouchPad+ will display when your compressor is running. Features: Stainless steel case that allows for use of magnetic mounts Compressor status indicator light (only functional if you're using the AccuAir e+ ECU) Includes: TouchPad+ controller 20ft TouchPad harness BR14389 USD 439.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-touchpad-plus-upgrade.html
AccuAir Height+ UpgradeAccuAir Height+ Upgrade https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/c/accuair_e-level_height_sensor_kit.jpg The AccuAir Height+ Upgrade allows you to add height sensors to your existing AccuAir e+ Connect wireless controller changing it into an e-Level+ system. This upgrade will give you 3 programmable height presets so you can air up or down to the perfect height with the touch of a single button. When using the ePlus app, your smartphone will show a visual display of each sensor's height percentage so you know what your suspension is doing at all times. Features: 3 programmable heights Visual display of each sensor's height percentage in app Automatic calibration Includes: (4) height sensors & linkage Height sensor harness BR14390 USD 619.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-height-plus-upgrade.html$619.95
BC Racing BR Series Coilovers (Extreme Low) for Volvo S80 II & V70 III (With OEM Self-Leveling)BC Racing BR Series Coilovers (Extreme Low) for Volvo S80 II & V70 III (With OEM Self-Leveling) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_13.jpg BC Racing BR Series Extreme Low Coilovers for the Volvo S80 II & V70 III (With OEM Self-Leveling) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Volvo S80 II & V70 III (With OEM Self-Leveling) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR17333 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volvo-s60-s80-v60-p3-bc-racing-br-type-coilover-kit-with-oem-self-leveling-extreme-low.html$1,345.00
BC Racing BR Series Coilovers (Extreme Low) for Volvo S80 II & V70 III (Without OEM Self-Leveling)BC Racing BR Series Coilovers (Extreme Low) for Volvo S80 II & V70 III (Without OEM Self-Leveling) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Volvo S80 II & V70 III (Without OEM Self-Leveling) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Volvo S80 II & V70 III (Without OEM Self-Leveling) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR07139 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volvo-v70-3rd-gen-bc-racing-br-type-coilover-kit-extreme-low.html$1,345.00
Page
- Page Previous
- Page 22
- Page 23
- Page 24
- Page 25
- You're currently reading page 26


