Search results for: 'm3' - Page 266

BC Racing BR Series Coilovers (Extreme Low) for VW Tiguan & Audi Q3 Mk2

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for VW Tiguan & Audi Q3 Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the VW Tiguan & Audi Q3 Mk2 are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Tiguan & Audi Q3 Mk2 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09170 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volkswagen-tiguan-mqb-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for VW Tiguan & Audi Q3 Mk2

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for VW Tiguan & Audi Q3 Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the VW Tiguan & Audi Q3 Mk2 are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the VW Tiguan & Audi Q3 Mk2, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Tiguan & Audi Q3 Mk2 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09169 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volkswagen-tiguan-mqb-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for VW Passat B5 Wagon 4motion

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for VW Passat B5 Wagon 4motion https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the VW Passat B5 Wagon 4motion are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Passat B5 Wagon 4motion aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09168 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volkswagen-passat-b5-awd-bc-racing-br-type-coilover-kit-extreme-low.html

VW Passat B5 AWD BC Racing BR Type Coilover Kit

BC Racing BR Series Coilovers for VW Passat B5 Wagon 4motion

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for VW Passat B5 Wagon 4motion https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the VW Passat B5 Wagon 4motion are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the VW Passat B5 Wagon 4motion, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Passat B5 Wagon 4motion aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09167 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volkswagen-passat-b5-awd-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Lexus UX 1st Gen & Toyota CH-R

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Lexus UX 1st Gen & Toyota CH-R https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the Lexus UX 1st Gen & Toyota CH-R are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Lexus UX 1st Gen & Toyota CH-R aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09164 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-chr-1st-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Lexus UX 1st Gen & Toyota CH-R

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Lexus UX 1st Gen & Toyota CH-R https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the Lexus UX 1st Gen & Toyota CH-R are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Lexus UX 1st Gen & Toyota CH-R, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Lexus UX 1st Gen & Toyota CH-R aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09163 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-chr-1st-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Scion iM & Toyota Corolla iM

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Scion iM & Toyota Corolla iM https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the Scion iM & Toyota Corolla iM are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Scion iM & Toyota Corolla iM aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09160 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-corolla-im-2nd-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Scion iM & Toyota Corolla iM

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Scion iM & Toyota Corolla iM https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the Scion iM & Toyota Corolla iM are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Scion iM & Toyota Corolla iM, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Scion iM & Toyota Corolla iM aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09159 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-corolla-im-2nd-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 4th Gen AWD

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 4th Gen AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius 4th Gen AWD are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 4th Gen AWD aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09156 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-prime-2nd-gen-awd-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius 4th Gen AWD

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius 4th Gen AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius 4th Gen AWD are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius 4th Gen AWD, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 4th Gen AWD aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09155 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-prime-2nd-gen-awd-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 4th Gen & Prime 2nd Gen

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 4th Gen & Prime 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius 4th Gen & Prime 2nd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 4th Gen & Prime 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09158 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-prime-2nd-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius 4th Gen & Prime 2nd Gen

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius 4th Gen & Prime 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the Toyota Prius 4th Gen & Prime 2nd Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius 4th Gen & Prime 2nd Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 4th Gen & Prime 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09157 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-prime-2nd-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius Plug-In 1st Gen

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius Plug-In 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius Plug-In 1st Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius Plug-In 1st Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09154 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-plugin-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius Plug-In 1st Gen

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius Plug-In 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius Plug-In 1st Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius Plug-In 1st Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius Plug-In 1st Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09153 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-plugin-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 3rd Gen

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius 3rd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 3rd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09152 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-3rd-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius 3rd Gen

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius 3rd Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius 3rd Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 3rd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09151 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-3rd-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 2nd Gen

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius 2nd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09150 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-2nd-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius 2nd Gen

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius 2nd Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius 2nd Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09149 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-2nd-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 1st Gen

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius 1st Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 1st Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09148 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-1st-gen-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius 1st Gen

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius 1st Gen are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius 1st Gen, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius 1st Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09147 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-1st-gen-bc-racing-br-type-coilover-kit.html

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius c

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Toyota Prius c https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Toyota Prius c are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius c aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09146 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-c-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Series Coilovers for Toyota Prius c

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Toyota Prius c https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Toyota Prius c are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Toyota Prius c, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Toyota Prius c aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09145 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-prius-c-bc-racing-br-type-coilover-kit.html

BC Racing BR Type Coilover Kit Extreme Low for Subaru Impreza GK GT

BC Racing BR Series Coilovers (Extreme Low) for Subaru Impreza GK/GT

Rating:

0%

100 0

$1,345.00

BC Racing BR Series Coilovers (Extreme Low) for Subaru Impreza GK/GT https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the Subaru Impreza GK/GT are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Subaru Impreza GK/GT aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09144 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/subaru-impreza-gk-gt-bc-racing-br-type-coilover-kit-extreme-low.html

BC Racing BR Type Coilover Kit for Subaru Impreza GK GT

BC Racing BR Series Coilovers for Subaru Impreza GK/GT

Rating:

0%

100 0

$1,195.00

BC Racing BR Series Coilovers for Subaru Impreza GK/GT https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the Subaru Impreza GK/GT are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Subaru Impreza GK/GT, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Subaru Impreza GK/GT aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09143 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/subaru-impreza-gk-gt-bc-racing-br-type-coilover-kit.html








Tell us about your Vehicle: