My Cart
Search
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle

Search results for: 'RA' - Page 279

Items 6673-6696 of 8573

Set Descending Direction
Products Browse a collection of products en
  1. bc_racing_coilovers
    BC Racing BR Series Coilovers (Extreme Low) for Honda HR-V 2nd Gen
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for Honda HR-V 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_9.jpg BC Racing BR Series Extreme Low Coilovers for the Honda HR-V 2nd Gen are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Honda HR-V 2nd Gen aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR07039 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  2. bc_racing_coilovers_04
    BC Racing BR Series Coilovers for Honda HR-V 2nd Gen AWD
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for Honda HR-V 2nd Gen AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_9.jpg BC Racing BR Series Coilovers for the Honda HR-V 2nd Gen AWD are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Honda HR-V 2nd Gen AWD, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Honda HR-V 2nd Gen AWD aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR07040 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Bag Riders Manual Air Ride Kit for Honda CRV 5th Gen
    Bag Riders Manual Air Ride Kit for Honda CR-V 5th Gen
    Rating:
    100%
    100 8
    $1,948.00
    Bag Riders Manual Air Ride Kit for Honda CR-V 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Honda CR-V 5th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Honda RW} Bag Riders Manual Air Ride Kit USD 1948.00 https://schema.org/NewCondition https://schema.org/InStock
  4. Bag Riders Manual Air Ride Kit for Mercedes Benz GLC-Class X253
    Bag Riders Manual Air Ride Kit for Mercedes GLC 4MATIC X253
    Rating:
    100%
    100 8
    $1,948.00
    Bag Riders Manual Air Ride Kit for Mercedes GLC 4MATIC X253 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Mercedes GLC 4MATIC X253 is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Mercedes X253 AWD} Bag Riders Manual Air Ride Kit USD 1948.00 https://schema.org/NewCondition https://schema.org/InStock
  5. Bag Riders Manual Air Ride Kit for Mercedes Benz GLA-Class X156 FWD
    Bag Riders Manual Air Ride Kit for Mercedes GLA X156 & Infiniti QX30
    Rating:
    100%
    100 8
    $3,010.00
    Bag Riders Manual Air Ride Kit for Mercedes GLA X156 & Infiniti QX30 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Mercedes GLA X156 & Infiniti QX30 is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Mercedes X156} Bag Riders Manual Air Ride Kit USD 3010.00 https://schema.org/NewCondition https://schema.org/InStock
  6. C10 C1500 RideTech StrongArms Front Lower Control Arms
    RideTech StrongArms Front Lower Control Arms (For Coolride Kit)
    Rating:
    0%
    100 0
    $995.00
    RideTech StrongArms Front Lower Control Arms (For Coolride Kit) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_2_2.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06451 USD 995.00 https://schema.org/NewCondition https://schema.org/InStock
  7. Chevrolet GMC 1500 2500 HD RideTech Front Spindle Pair
    RideTech Front Spindle Pair
    Rating:
    0%
    100 0
    $450.00
    RideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1_1_1_1_1.jpg The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms. BR06540 USD 450.00 https://schema.org/NewCondition https://schema.org/InStock
  8. ridetech_strongarms_front_upper_control_arms_camaro_firebird_2nd_gen
    RideTech StrongArms Front Upper Control Arms
    Rating:
    0%
    100 0
    $575.00
    RideTech StrongArms Front Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_upper_control_arms_chevrolet_camaro_nova_pontiac_firebird_1_1_1_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06530 USD 575.00 https://schema.org/NewCondition https://schema.org/InStock
  9. Chevrolet GMC 1500 2500 RideTech Front Lower Control Arms
    RideTech StrongArms Front Lower Control Arms (For CoolRide Kit) for Chevy GMC 1500 2500
    Rating:
    0%
    100 0
    $945.00
    RideTech StrongArms Front Lower Control Arms (For CoolRide Kit) for Chevy GMC 1500 2500 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_2_1_2.jpg What says “performance” more than a set of tubular control arms for the Chevy GMC 1500 2500! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. BR06529 USD 945.00 https://schema.org/NewCondition https://schema.org/InStock
  10. Chevrolet GMC 1500 2500 RideTech Front Lower Control Arms | Bag Riders
    RideTech StrongArms Front Lower Control Arms (For ShockWave Kit) for Chevy GMC 1500 2500
    Rating:
    0%
    100 0
    $995.00
    RideTech StrongArms Front Lower Control Arms (For ShockWave Kit) for Chevy GMC 1500 2500 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_el_camino_1_1.jpg What says “performance” more than a set of tubular control arms for your Chevy GMC 1500 2500! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06528 USD 995.00 https://schema.org/NewCondition https://schema.org/InStock
  11. RideTech_CoolRide_w_Shocks
    Ridetech CoolRide Front Air Suspension for GM Silverado Sierra 1500 2500 GMT 800
    Rating:
    0%
    100 0
    $995.00
    Ridetech CoolRide Front Air Suspension for GM Silverado Sierra 1500 2500 GMT 800 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_w_shocks_18.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. {GM T800} RideTech CoolRide Front Kit USD 995.00 https://schema.org/NewCondition https://schema.org/InStock
  12. Chevrolet GMC 1500 2500 HD RideTech ShockWave HQ Front Kit
    Ridetech ShockWave HQ Front Air Suspension (for StrongArms Lower Control Arms) for GM Silverado Sierra 1500 2500 GMT 800
    Rating:
    0%
    100 0
    $995.00
    Ridetech ShockWave HQ Front Air Suspension (for StrongArms Lower Control Arms) for GM Silverado Sierra 1500 2500 GMT 800 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_11383001.jpg Ridetech's HQ ShockWave Air Suspension for the StrongArms Lower Control Arms) for GM Silverado Sierra 1500 2500 GMT 800 mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. These HQ ShockWaves use the same coilover-style, shock-within-a-spring construction as TQ, but in a more budget friendly single rebound-adjustable package. Single Adjustable Rebound The HQ Series ShockWaves feature a 24 position rebound adjustment knob on the shock body that allows you to dial your ride from daily driven comfort to a firmer, more controlled sport setting. HQ Series vs TQ Series ShockWaves These HQ Series ShockWaves from Ridetech use the same bags, and core hardware of the premium TQ Series. They still feature 1.834" pistons, 5/8" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. The main difference comes down to how much damping control you get. The HQ lacks the remote reservoir of the TQ which allows for high speed and low speed compression adjustment as well. These HQ ShockWaves for the StrongArms Lower Control Arms) for GM Silverado Sierra 1500 2500 GMT 800 are best for daily driving, weekend warriors and show cars while the more expensive TQ Series are best suited for heavy track use and for those seeking the most optimal handling characteristics. Features of the HQ ShockWave Front Kit Completely redesigned internals Aluminum impact forged construction, allowing for leak free operation Single adjustable shock valving with 24 rebound clicks Available in a wide range of stroke lengths and mounting styles to fit a large variety of applications Monotube design for superior oil control What's Included (2) Front Ridetech HQ ShockWaves for StrongArms Lower Control Arms) for GM Silverado Sierra 1500 2500 GMT 800 1/4" PTC air line fittings Ridetech's 1,000,001 mile warranty BR06531 USD 995.00 https://schema.org/NewCondition https://schema.org/InStock
  13. 1502 Tahoe Suburban Jimmy RideTech Front Spindle Pair
    RideTech Front Spindle Pair
    Rating:
    0%
    100 0
    $315.00
    RideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1_1_1.jpg The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms. BR06519 USD 315.00 https://schema.org/NewCondition https://schema.org/InStock
  14. ridetech_strongarms_front_upper_control_arms_camaro_firebird_2nd_gen
    RideTech StrongArms Front Upper Control Arms
    Rating:
    0%
    100 0
    $575.00
    RideTech StrongArms Front Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_upper_control_arms_chevrolet_camaro_nova_pontiac_firebird_1_1_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06514 USD 575.00 https://schema.org/NewCondition https://schema.org/InStock
  15. ridetech_strongarms_front_lower_control_arms_chevrolet_impala
    RideTech StrongArms Front Lower Control Arms
    Rating:
    0%
    100 0
    $945.00
    RideTech StrongArms Front Lower Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_2_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06513 USD 945.00 https://schema.org/NewCondition https://schema.org/InStock
  16. RideTech_CoolRide_w_Shocks
    Ridetech CoolRide Front Air Suspension for GM C1500 1988-1998 & Tahoe/Yukon 1992-1999
    Rating:
    0%
    100 0
    $1,105.00
    Ridetech CoolRide Front Air Suspension for GM C1500 1988-1998 & Tahoe/Yukon 1992-1999 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_w_shocks_16.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. {GM T400, GM T420} RideTech CoolRide Front Kit USD 1105.00 https://schema.org/NewCondition https://schema.org/InStock
  17. ridetech_front_spindle_pair_chevrolet_camaro_nova_pontiac_firebird
    RideTech Front Spindle Pair
    Rating:
    0%
    100 0
    $315.00
    RideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1_1.jpg The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. BR06504 USD 315.00 https://schema.org/NewCondition https://schema.org/InStock
  18. ridetech_strongarms_front_upper_control_arms_camaro_firebird_2nd_gen
    RideTech StrongArms Front Upper Control Arms (For CoolRide Kit)
    Rating:
    0%
    100 0
    $575.00
    RideTech StrongArms Front Upper Control Arms (For CoolRide Kit) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_upper_control_arms_chevrolet_camaro_nova_pontiac_firebird_1_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06495 USD 575.00 https://schema.org/NewCondition https://schema.org/InStock
  19. RideTech_CoolRide_w_Shocks
    Ridetech CoolRide Front Air Suspension for Chevy S10 & Blazer
    Rating:
    0%
    100 0
    $1,105.00
    Ridetech CoolRide Front Air Suspension for Chevy S10 & Blazer https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_w_shocks_15.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. {GM T325, GM T330} RideTech CoolRide Front Kit USD 1105.00 https://schema.org/NewCondition https://schema.org/InStock
  20. ridetech_shockwave_hq_front_g_body_monte_carlo_malibu
    Ridetech ShockWave HQ Front Air Suspension for Chevy S10 & Blazer
    Rating:
    0%
    100 0
    $995.00
    Ridetech ShockWave HQ Front Air Suspension for Chevy S10 & Blazer https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_ford_thunderbird_4th_ge_2_5_1_2.jpg Ridetech's HQ ShockWave Air Suspension for the Chevy S10 & Blazer mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. These HQ ShockWaves use the same coilover-style, shock-within-a-spring construction as TQ, but in a more budget friendly single rebound-adjustable package. Single Adjustable Rebound The HQ Series ShockWaves feature a 24 position rebound adjustment knob on the shock body that allows you to dial your ride from daily driven comfort to a firmer, more controlled sport setting. HQ Series vs TQ Series ShockWaves These HQ Series ShockWaves from Ridetech use the same bags, and core hardware of the premium TQ Series. They still feature 1.834" pistons, 5/8" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. The main difference comes down to how much damping control you get. The HQ lacks the remote reservoir of the TQ which allows for high speed and low speed compression adjustment as well. These HQ ShockWaves for the Chevy S10 & Blazer are best for daily driving, weekend warriors and show cars while the more expensive TQ Series are best suited for heavy track use and for those seeking the most optimal handling characteristics. Features of the HQ ShockWave Front Kit Completely redesigned internals Aluminum impact forged construction, allowing for leak free operation Single adjustable shock valving with 24 rebound clicks Available in a wide range of stroke lengths and mounting styles to fit a large variety of applications Monotube design for superior oil control What's Included (2) Front Ridetech HQ ShockWaves for Chevy S10 & Blazer 1/4" PTC air line fittings Ridetech's 1,000,001 mile warranty {GM T325, GM T330} RideTech ShockWave HQ Front Kit USD 995.00 https://schema.org/NewCondition https://schema.org/InStock
  21. Chevrolet C10 GMC C1500 RideTech Front Spindle Pair
    RideTech Front Spindle Pair for Chevy C10 GMC C1500 2nd Gen
    Rating:
    0%
    100 0
    $450.00
    RideTech Front Spindle Pair for Chevy C10 GMC C1500 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1.jpg This RideTech spindle for the Chevy C10 GMC C1500 2nd Gen is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms. BR06479 USD 450.00 https://schema.org/NewCondition https://schema.org/InStock
  22. ridetech_strongarms_front_upper_control_arms_camaro_firebird_2nd_gen
    RideTech StrongArms Front Upper Control Arms
    Rating:
    0%
    100 0
    $615.00
    RideTech StrongArms Front Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_upper_control_arms_chevrolet_camaro_nova_pontiac_firebird_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06474 USD 615.00 https://schema.org/NewCondition https://schema.org/InStock
  23. Chevrolet C10 GMC C1500 RideTech Front Spindle Pair
    RideTech Front Spindle Pair for Chevy C10 GMC C1500 2nd Gen
    Rating:
    0%
    100 0
    $450.00
    RideTech Front Spindle Pair for Chevy C10 GMC C1500 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1.jpg This Chevy C10 GMC C1500 2nd Gen RideTech Front Spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms. BR06472 USD 450.00 https://schema.org/NewCondition https://schema.org/InStock
  24. ridetech_strongarms_front_upper_control_arms_chevrolet_impala
    RideTech StrongArms Front Upper Control Arms (For Coolride Kit)
    Rating:
    0%
    100 0
    $615.00
    RideTech StrongArms Front Upper Control Arms (For Coolride Kit) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_1_1.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these. Development StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms. Design RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components. Geometry Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs. RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should! The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement. The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius. All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride! BR06471 USD 615.00 https://schema.org/NewCondition https://schema.org/InStock
Page