My Cart
Search
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle

Search results for: 'bmw' - Page 30

Items 697-720 of 864

Set Descending Direction
Products Browse a collection of products en
  1. Maxload Rear Air Suspension without Shocks
    Maxload Rear Air Suspension for BMW F44 2 Series xDrive (No Shocks)
    Rating:
    0%
    100 0
    $600.00
    Maxload Rear Air Suspension for BMW F44 2 Series xDrive (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-rear-bags-actual-product-not-displayed_92.jpg Looking to switch over from coilovers to air suspension on your BMW F44 2 Series xDrive, but don't want to purchase a completely new suspension system? With the Maxload Rear Air Suspension kit, you can swap the standalone coil springs from rear of your car for these vehicle specific mounting brackets and air springs. These double bellow bags will allow you to slam your vehicle when parked, and you can combine this rear kit with conversion bags for your front struts to complete the package while keeping your current coilovers. Kit Includes: (2) MAXLOAD double bellow bags with integrated mounting brackets (2) 1/4” compression fittings Anodized end caps All required hardware for installation Free technical support BR18456 USD 600.00 https://schema.org/NewCondition https://schema.org/InStock
  2. Maxload Rear Air Suspension without Shocks
    Maxload Rear Air Suspension for BMW E36 3 Series & M3 (No Shocks)
    Rating:
    0%
    100 0
    $600.00
    Maxload Rear Air Suspension for BMW E36 3 Series & M3 (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-rear-bags-actual-product-not-displayed_101.jpg Looking to switch over from coilovers to air suspension on your BMW E36 3 Series & M3, but don't want to purchase a completely new suspension system? With the Maxload Rear Air Suspension kit, you can swap the standalone coil springs from rear of your car for these vehicle specific mounting brackets and air springs. These double bellow bags will allow you to slam your vehicle when parked, and you can combine this rear kit with conversion bags for your front struts to complete the package while keeping your current coilovers. Kit Includes: (2) MAXLOAD double bellow bags with integrated mounting brackets (2) 1/4” compression fittings Anodized end caps All required hardware for installation Free technical support BR18447 USD 600.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Maxload Rear Air Suspension without Shocks
    Maxload Rear Air Suspension for BMW E30 3 Series & M3 (No Shocks)
    Rating:
    0%
    100 0
    $600.00
    Maxload Rear Air Suspension for BMW E30 3 Series & M3 (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-rear-bags-actual-product-not-displayed_102.jpg Looking to switch over from coilovers to air suspension on your BMW E30 3 Series & M3, but don't want to purchase a completely new suspension system? With the Maxload Rear Air Suspension kit, you can swap the standalone coil springs from rear of your car for these vehicle specific mounting brackets and air springs. These double bellow bags will allow you to slam your vehicle when parked, and you can combine this rear kit with conversion bags for your front struts to complete the package while keeping your current coilovers. Kit Includes: (2) MAXLOAD double bellow bags with integrated mounting brackets (2) 1/4” compression fittings Anodized end caps All required hardware for installation Free technical support BR18446 USD 600.00 https://schema.org/NewCondition https://schema.org/InStock
  4. Universal Air Solution Series Kit
    Universal Air Solution Series Air Suspension for BMW F01 F02 7 Series
    Rating:
    0%
    100 0
    $3,064.72
    Universal Air Solution Series Air Suspension for BMW F01 F02 7 Series https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__2_1_1_2_1_2_1_2_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1.jpg The Universal Air Solution Series for the BMW F01 F02 7 Series is a vehicle-specific, made-to-order air suspension package built to solve the two biggest complaints with aftermarket air ride: bags that sit too tall or too fat to clear tires and suspension components, and a ride that's either too stiff or too soft to live with daily. Solution Series pairs Universal Air's air springs with proprietary fully threaded dampers to deliver the lowest compressed height, the widest usable travel range, and a ride quality tuned specifically for air. Hand-Built, Vehicle-Specific Fit Universal Air hand-builds every Solution Series kit to order, selecting from over 20 proprietary bag designs to match the exact geometry of your BMW F01 F02 7 Series. That means the compressed height, travel range, and clearance are dialed in for your application instead of forced to fit it. Threaded Dampers Built for Air Universal Air developed these dampers directly with a top-tier damper manufacturer and tuned them specifically for vehicles running air suspension. They're stiff enough for performance driving and relaxed enough for daily comfort. The threaded damper bodies allow you to extend or shorten the suspension without sacrificing stroke travel or bag pressure. Premium Construction Throughout Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for comfort Sealed rotary thrust bearings keep dirt and moisture out of the assembly 6061-T6 aluminum, hard-anodized bag end caps for long-term durability Premium 'AN'-style leader lines with a synthetic rubber core and woven stainless-steel mesh reinforcement braided nylon outer sleeve Stainless steel hardware with in-house-milled 6061 aluminum brackets, paired with urethane bushings or pillow-ball bearings depending on application What's Included Universal Air Solution Series front suspension for BMW F01 F02 7 Series Universal Air Solution Series rear suspension for BMW F01 F02 7 Series (2) Spanner tools Fittings *Actual product not displayed BR17524 USD 3064.72 https://schema.org/NewCondition https://schema.org/InStock
  5. TruHart AirPlus Air Suspension for BMW E36 3 Series & M3
    TruHart AirPlus Air Suspension for BMW E36 3 Series & M3
    Rating:
    0%
    100 0
    $1,485.00
    TruHart AirPlus Air Suspension for BMW E36 3 Series & M3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart-airplus-air-suspension_1.jpg The Truhart AirPlus air suspension for the BMW E36 3 Series & M3 is the ultimate entry-level solution for enthusiasts looking to achieve that flawless, bagged stance on a budget. Engineered to be simple, yet versatile, the AirPlus suspension features fully threaded shock bodies, fixed damping settings, and camber plates (dependent on platform) to help you dial in that perfect fitment. Fully Threaded Shock Bodies Because the shock bodies are fully threaded top to bottom, you're able to get both that perfect ride height and air out stance by raising or lowering the bottom mount of the shock. This feature is found on all cars with four-corner struts. On cars with a separate spring and shock in the rear, a threaded rear shock is provided to assist with your air out fitment. Fixed Damping Settings Damping on the Truhart AirPlus kit is fixed rather than adjustable. This is the main trade-off that keeps the setup priced lower than other higher tier lines. For a daily driven or show focused build that doesn't need dial-in damping control, this keeps things simple and affordable while still delivering a proper air ride setup. Kit Includes Truhart AirPlus front suspension Truhart AirPlus rear suspension (4) 1/4" tube - 1/8" BSPT compression elbows *Actual product not displayed BR13059 USD 1485.00 https://schema.org/NewCondition https://schema.org/InStock
  6. bc_racing_coilovers_01
    BC Racing BR Series Coilovers (Extreme Low) for BMW E9 New Six CS
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for BMW E9 New Six CS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the BMW E9 New Six CS are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW E9 New Six CS aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09099 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  7. universal_air_solution_series_apnd
    Universal Air Solution Series Air Suspension for BMW F12 F13 M6
    Rating:
    0%
    100 0
    $3,064.72
    Universal Air Solution Series Air Suspension for BMW F12 F13 M6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__2_1_1_2_1_1_1_3_2_1_1.jpg The Universal Air Solution Series for the BMW F12 F13 M6 is a vehicle-specific, made-to-order air suspension package built to solve the two biggest complaints with aftermarket air ride: bags that sit too tall or too fat to clear tires and suspension components, and a ride that's either too stiff or too soft to live with daily. Solution Series pairs Universal Air's air springs with proprietary fully threaded dampers to deliver the lowest compressed height, the widest usable travel range, and a ride quality tuned specifically for air. Hand-Built, Vehicle-Specific Fit Universal Air hand-builds every Solution Series kit to order, selecting from over 20 proprietary bag designs to match the exact geometry of your BMW F12 F13 M6. That means the compressed height, travel range, and clearance are dialed in for your application instead of forced to fit it. Threaded Dampers Built for Air Universal Air developed these dampers directly with a top-tier damper manufacturer and tuned them specifically for vehicles running air suspension. They're stiff enough for performance driving and relaxed enough for daily comfort. The threaded damper bodies allow you to extend or shorten the suspension without sacrificing stroke travel or bag pressure. Premium Construction Throughout Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for comfort Sealed rotary thrust bearings keep dirt and moisture out of the assembly 6061-T6 aluminum, hard-anodized bag end caps for long-term durability Premium 'AN'-style leader lines with a synthetic rubber core and woven stainless-steel mesh reinforcement braided nylon outer sleeve Stainless steel hardware with in-house-milled 6061 aluminum brackets, paired with urethane bushings or pillow-ball bearings depending on application What's Included Universal Air Solution Series front suspension for BMW F12 F13 M6 Universal Air Solution Series rear suspension for BMW F12 F13 M6 (2) Spanner tools Fittings *Actual product not displayed BR13365 USD 3064.72 https://schema.org/NewCondition https://schema.org/InStock
  8. d2_racing_camber_plates
    D2 Racing Front Camber Plates for BMW E36 3 Series & M3
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for BMW E36 3 Series & M3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_4.jpg Fine-tune your BMW E36 3 Series & M3's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your BMW E36 3 Series & M3's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your BMW E36 3 Series & M3 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your BMW E36 3 Series & M3, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05139 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  9. BMW E34 5 Series M5 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for BMW E34 5 Series & M5
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for BMW E34 5 Series & M5 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_2.jpg Fine-tune your BMW E34 5 Series & M5's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your BMW E34 5 Series & M5's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your BMW E34 5 Series & M5 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your BMW E34 5 Series & M5, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05142 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  10. bc_racing_coilovers_sep_spr_camber
    BC Racing BR Series Coilovers (Extreme Low) for BMW E84 X1 AWD
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for BMW E84 X1 AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_12.jpg BC Racing BR Series Extreme Low Coilovers for the BMW E84 X1 AWD are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW E84 X1 AWD aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR15809 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  11. bc_racing_coilovers_03
    BC Racing BR Series Coilovers for BMW F15 X5 & F16 X6
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for BMW F15 X5 & F16 X6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Coilovers for the BMW F15 X5 & F16 X6 are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the BMW F15 X5 & F16 X6, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW F15 X5 & F16 X6 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09100 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  12. Maxload Air Suspension for BMW G20
    Maxload Air Suspension for BMW G2X 3/4 Series & G42 2 Series
    Rating:
    0%
    100 0
    $1,960.00
    Maxload Air Suspension for BMW G2X 3/4 Series & G42 2 Series https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-air-suspension-front-and-rear.jpg Looking for quality air suspension for your BMW G2X 3/4 Series & G42 2 Series without paying a premium? Maxload delivers a great entry into air ride with features usually reserved for higher-priced kits - 32-way adjustable damping, fully threaded shock bodies, and a complete four-corner setup engineered specifically for the BMW G2X 3/4 Series & G42 2 Series. Whether you're chasing the perfect stance or want the flexibility to raise up for steep driveways and speed bumps, Maxload makes air ride accessible without cutting corners where it counts. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your BMW G2X 3/4 Series & G42 2 Series: Maxload front air suspension (pair) Maxload rear air suspension (pair) (4) 1/4" tube - 1/8" NPT compression elbows (4) Damping adjustment knobs Spanner wrench Up to (4) leader lines, when applicable 32-Way Adjustable Damping Every Maxload strut features 32 clicks of damping adjustment, letting you dial in the ride quality of your BMW G2X 3/4 Series & G42 2 Series exactly how you want it - softer for daily comfort, firmer for spirited driving. The included adjustment knobs make changes quick and tool-free, so you can fine-tune your setup as your driving style or road conditions change. Threaded Shock Bodies for Full Height Adjustment Maxload's fully threaded shock bodies work like a coilover - independent of air pressure, you can set the baseline ride height of your BMW G2X 3/4 Series & G42 2 Series with the included spanner wrench. This means you control both how low the car sits aired out and how it rides at driving height, giving you the ability to dial things your way. Maxload-made air bags at all four corners provide a smooth, progressive spring rate across the full range of travel. Complete Your Air Ride Setup This kit covers the suspension side - pair it with an air management system to control it. The Bag Riders PRO Control System offers plug-and-play height control with three presets and a 2-year warranty, or browse our full range of management packages to find the right fit for your build and budget. Want to buy a complete, all-in-one package? Shop our complete air ride kits. Not sure what you need? Our enthusiast support team rides on air too - ask an expert and we'll spec the complete setup for your BMW G2X 3/4 Series & G42 2 Series. *Actual Product Not Displayed BR17973 USD 1960.00 https://schema.org/NewCondition https://schema.org/InStock
  13. BMW 3 Series E30 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for BMW E30 3 Series & M3
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for BMW E30 3 Series & M3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_1.jpg Fine-tune your BMW E30 3 Series & M3's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your BMW E30 3 Series & M3's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your BMW E30 3 Series & M3 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your BMW E30 3 Series & M3, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05463 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  14. bc_racing_coilovers_03
    BC Racing BR Series Coilovers (Extreme Low) for BMW E39 5 Series Touring
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for BMW E39 5 Series Touring https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_12.jpg BC Racing BR Series Extreme Low Coilovers for the BMW E39 5 Series Touring are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW E39 5 Series Touring aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR15075 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  15. BMW 330e G20e BC Racing Extreme Low BR Series Coilover Kit
    BC Racing BR Series Coilovers (Extreme Low) for BMW G20 3 Series Hybrid
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for BMW G20 3 Series Hybrid https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_13.jpg BC Racing BR Series Extreme Low Coilovers for the BMW G20 3 Series Hybrid are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW G20 3 Series Hybrid aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR25915 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  16. bc_racing_coilovers_03
    BC Racing BR Series Coilovers for BMW E85 E86 Z4 M
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Series Coilovers for BMW E85 E86 Z4 M https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_11.jpg BC Racing BR Series Coilovers for the BMW E85 E86 Z4 M are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the BMW E85 E86 Z4 M, built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW E85 E86 Z4 M aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR14689 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  17. bc_racing_coilovers
    BC Racing BR Series Coilovers (Extreme Low) for BMW E60 5 Series AWD
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Series Coilovers (Extreme Low) for BMW E60 5 Series AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_10.jpg BC Racing BR Series Extreme Low Coilovers for the BMW E60 5 Series AWD are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the BMW E60 5 Series AWD aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR09095 USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock
  18. D2 Racing Air Ride Suspension Kit for BMW F15 X5
    D2 Racing Air Suspension for BMW F15 X5 & F16 X6
    Rating:
    0%
    100 0
    $2,430.00
    D2 Racing Air Suspension for BMW F15 X5 & F16 X6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit.jpg D2 Racing air suspension for the BMW F15 X5 & F16 X6 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your BMW F15 X5 & F16 X6: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your BMW F15 X5 & F16 X6. *Actual Product Not Displayed BR17405 USD 2430.00 https://schema.org/NewCondition https://schema.org/InStock
  19. Universal Air Solution Series Kit
    Universal Air Solution Series Air Suspension for BMW E70 X5 & X5M
    Rating:
    0%
    100 0
    $2,519.96
    Universal Air Solution Series Air Suspension for BMW E70 X5 & X5M https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__2_1_1_2_1_2_1_2_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1.jpg The Universal Air Solution Series for the BMW E70 X5 & X5M is a vehicle-specific, made-to-order air suspension package built to solve the two biggest complaints with aftermarket air ride: bags that sit too tall or too fat to clear tires and suspension components, and a ride that's either too stiff or too soft to live with daily. Solution Series pairs Universal Air's air springs with proprietary fully threaded dampers to deliver the lowest compressed height, the widest usable travel range, and a ride quality tuned specifically for air. Hand-Built, Vehicle-Specific Fit Universal Air hand-builds every Solution Series kit to order, selecting from over 20 proprietary bag designs to match the exact geometry of your BMW E70 X5 & X5M. That means the compressed height, travel range, and clearance are dialed in for your application instead of forced to fit it. Threaded Dampers Built for Air Universal Air developed these dampers directly with a top-tier damper manufacturer and tuned them specifically for vehicles running air suspension. They're stiff enough for performance driving and relaxed enough for daily comfort. The threaded damper bodies allow you to extend or shorten the suspension without sacrificing stroke travel or bag pressure. Premium Construction Throughout Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for comfort Sealed rotary thrust bearings keep dirt and moisture out of the assembly 6061-T6 aluminum, hard-anodized bag end caps for long-term durability Premium 'AN'-style leader lines with a synthetic rubber core and woven stainless-steel mesh reinforcement braided nylon outer sleeve Stainless steel hardware with in-house-milled 6061 aluminum brackets, paired with urethane bushings or pillow-ball bearings depending on application What's Included Universal Air Solution Series front suspension for BMW E70 X5 & X5M Universal Air Solution Series rear suspension for BMW E70 X5 & X5M (2) Spanner tools Fittings *Actual product not displayed BR17522 USD 2519.96 https://schema.org/NewCondition https://schema.org/InStock
  20. D2 Racing RS Coilovers for BMW E36 Compact & Z3 E85 M
    D2 Racing RS Coilovers for BMW E36 Compact & Z3 E85 M
    Rating:
    0%
    100 0
    $1,080.00
    D2 Racing RS Coilovers for BMW E36 Compact & Z3 E85 M https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers.jpg The D2 Racing RS Coilover Kit for the BMW E36 Compact & Z3 E85 M is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the BMW E36 Compact & Z3 E85 M a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR07393 USD 1080.00 https://schema.org/NewCondition https://schema.org/InStock
  21. BMW E46 3 Series M3 D2 Racing RS true rear coilover kit
    D2 Racing RS True Rear Coilovers for BMW E46 3 Series & M3
    Rating:
    0%
    100 0
    $1,215.00
    D2 Racing RS True Rear Coilovers for BMW E46 3 Series & M3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_4.jpg The D2 Racing RS Coilover Kit for the BMW E46 3 Series & M3 is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the BMW E46 3 Series & M3 a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR17701 USD 1215.00 https://schema.org/NewCondition https://schema.org/InStock
  22. BMW E61 5 Series AWD D2 Racing Air Ride Suspension Kit
    D2 Racing Air Suspension for BMW E61 5 Series Touring xDrive
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for BMW E61 5 Series Touring xDrive https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit.jpg D2 Racing air suspension for the BMW E61 5 Series Touring xDrive features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your BMW E61 5 Series Touring xDrive: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your BMW E61 5 Series Touring xDrive. *Actual Product Not Displayed BR06415 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  23. Bag Riders PRO Pre-Configured Air Ride Kit
    Bag Riders PRO Pre-Configured Air Ride Kit - BMW E46 3 Series & M3
    Rating:
    0%
    100 0
    $4,415.00
    Bag Riders PRO Pre-Configured Air Ride Kit - BMW E46 3 Series & M3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_103.jpg This pre-configured Bag Riders PRO air ride kit for the BMW E46 is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. We have paired this with our Super Low Air Suspension for the ultimate package, allowing you to drive low, and park even lower. Includes: Bag Riders Super Low Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty BR27136 USD 4415.00 https://schema.org/NewCondition https://schema.org/InStock
  24. d2_racing_MacPherson-DB_and_SS&S-DB
    D2 Racing Air Suspension for BMW E36 Compact & Z3 E85 M
    Rating:
    0%
    100 0
    $2,160.00
    D2 Racing Air Suspension for BMW E36 Compact & Z3 E85 M https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit.jpg D2 Racing air suspension for the BMW E36 Compact & Z3 E85 M features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your BMW E36 Compact & Z3 E85 M: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your BMW E36 Compact & Z3 E85 M. *Actual Product Not Displayed BR04109 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock
Page