Search results for: 'accuair' - Page 34
Products Browse a collection of products en
AccuAir Air Ride Kit for Suzuki SX4 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Suzuki SX4 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Suzuki SX4} AccuAir e-Level+ Air Ride Kit USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/suzuki-sx4-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Lexus LS460 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Lexus LS460 4th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Lexus XF40} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/lexus-ls460-4th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda HR-V 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda HR-V 2nd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RU5} AccuAir e-Level+ Air Ride Kit USD 4245.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-hrv-2nd-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda Civic 10th Gen Hatchback https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda Civic 10th Gen Hatchback is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda FK7} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-civic-10th-gen-hatchback-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda Civic Si 10th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda Civic Si 10th Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda FC3} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-civic-si-10th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Saab 9-3 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Saab 9-3 2nd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM Epsilon 1} AccuAir e-Level+ Air Ride Kit USD 4245.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/saab-9-3-2nd-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for BMW G31 5 Series Touring https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the BMW G31 5 Series Touring is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {BMW G31} AccuAir e-Level+ Air Ride Kit USD 4155.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bmw-g31-5-series-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Audi R8 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Audi R8 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Audi R8} AccuAir e-Level+ Air Ride Kit USD 3183.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/audi-r8-1st-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir ENDO Air Ride Kit for VW Jetta GLI Mk7 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your VW Jetta GLI Mk7 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your VW Jetta GLI Mk7. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {VW Mk7 GLI} AccuAir ENDO Air Ride Kit USD 5400.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-jetta-gli-mk7-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Volkswagen Passat B5 Wagon https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Volkswagen Passat B5 Wagon with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Volkswagen Passat B5 Wagon. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {VW B5 Wagon} AccuAir ENDO Air Ride Kit USD 5170.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/volkswagen-passat-b5-wagon-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Toyota Highlander 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Toyota Highlander 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Toyota Highlander 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Toyota XU50 AWD} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-highlander-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Ford Focus ST Mk3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Ford Focus ST Mk3 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ford Focus ST Mk3. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ford Global C ST} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-focus-st-mk3-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Ford Focus RS Mk3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Ford Focus RS Mk3 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ford Focus RS Mk3. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ford Global C RS} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-focus-rs-mk3-accuair-endo-air-ride-kit.html
AccuAir Air Ride Kit for Honda Civic Type R FK8 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda Civic Type R FK8 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda FK8} AccuAir e-Level+ Air Ride Kit USD 3735.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-civic-type-r-10th-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Acura Integra Type R DC2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Acura Integra Type R DC2 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Acura DC2} AccuAir e-Level+ Air Ride Kit USD 3685.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/acura-integra-type-r-3rd-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mercedes A-Class W177 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mercedes A-Class W177 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mercedes A-Class W177. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mercedes W177 Twistbeam} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mercedes-a-class-w177-accuair-endo-air-ride-kit.html
AccuAir Air Ride Kit for Chevrolet Corvette C5 C6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Chevrolet Corvette C5 C6 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM Y5} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-corvette-c5-c6-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Toyota Supra Mk4 A80 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Toyota Supra Mk4 A80 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Toyota A80} AccuAir e-Level+ Air Ride Kit USD 3685.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/toyota-supra-mk4-sc300-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Infiniti Q45 & Cima F50 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Infiniti Q45 & Cima F50 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Infiniti F50} AccuAir e-Level+ Air Ride Kit USD 4245.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/infiniti-q45-3rd-gen-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Cadillac Full Size 1957-1960 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Cadillac Full Size 1957-1960 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM C2} AccuAir e-Level+ Air Ride Kit USD 3955.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/cadillac-series-62-deville-58-60-accuair-e-level-plus-air-ride-kit.html
AccuAir Air Ride Kit for Honda Pilot FWD 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda Pilot FWD 3rd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF6} AccuAir e-Level+ Air Ride Kit USD 3895.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-3rd-gen-fwd-accuair-e-level-air-ride-kit.html
AccuAir Air Ride Kit for Honda Pilot FWD 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Honda Pilot FWD 2nd Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF3} AccuAir e-Level+ Air Ride Kit USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-2nd-gen-fwd-accuair-e-level-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda HR-V AWD 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda HR-V AWD 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda HR-V AWD 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RU6} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-hr-v-awd-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Lancer 9th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Mitsubishi Lancer 9th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Mitsubishi Lancer 9th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CY2A} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/mitsubishi-lancer-9th-gen-accuair-endo-air-ride-kit.html

