Search results for: 'm3' - Page 368

Products Browse a collection of products en

Brass Compression Male Straight
Rating:
0%
100 0

$9.63

Brass Compression Male Straight https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/p/a/parker_compression_male_straight_base_3b_1.jpg Compression fittings are another option for plumbing your setup compared to PTC. Although we recommend PTC fittings for standard nylon air line, fittings like the Brass Compression Male Straight can be used for hard line installations. NPTF is flared NPT, and will still thread into a female NPT port. Brass Compression Male Straight USD 9.63 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/brass-compression-male-straight.html
Brass Compression Elbow
Rating:
0%
100 0

$7.39

Brass Compression Elbow https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/p/a/parker_compression_male_elbow_base_1b.jpg Compression fittings are another option for plumbing your setup compared to PTC. Although we recommend PTC fittings for standard nylon air line, fittings like the Brass Compression Elbow can be used for hard line installations. NPTF is flared NPT, and will still thread into a female NPT port. Brass Compression Elbow USD 7.39 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/brass-compression-elbow.html
Viair Safety Valve
Rating:
0%
100 0

$12.31

Viair Safety Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/v/i/viar-safety-valve-2b.jpg This safety valve will automatically release air from your tank if the pressure surpasses the rating of the safety valve (175 PSI, 200 PSI, 225 PSI or 250 PSI). A safety valve can also be used to conveniently relieve pressure from your tank by pulling the pin upward. Just thread the fitting into a port on your tank and you're done! Viair Safety Valve USD 12.31 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/viair-safety-valve.html
AccuAir ECU Main Harness
Rating:
100%
100 2

$93.95

AccuAir ECU Main Harness https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/e/c/ecu_main_harness.jpg This is the main ECU harness for AccuAir's e-Level+ and e+ Connect systems. This harness also works for older e-Level TouchPad and SwitchSpeed systems. BR01034 USD 93.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/accuair-ecu-main-harness.html
NPT Inflation Valve (1/8" NPT)
Rating:
100%
100 4

$5.00

NPT Inflation Valve (1/8" NPT) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/i/air_lift_npt_inflation.jpg This inflation valve is a standard Schrader valve with 1/8" NPT threads. When mounted on your tank, it can be used to both pressurize and depressurize in case of management or compressor failure. This item is equivalent to Air Lift part 21366. BR00005 USD 5.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/npt-inflation-valve-1-8-npt.html
Ridgid 400 Series Hard Line Bender (3/8")
Rating:
0%
100 0

$135.00

Ridgid 400 Series Hard Line Bender (3/8") https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridgid_400_series_hardline_bender.jpg If you're looking to do it right the first time, Ridgid is the way to go. Sure, there are cheaper bender alternatives on the market but the Ridgid 400 Series gives you the control and accuracy you need to make sure you aren't wasting any bends. This hard line bender is designed for bending copper, steel, and stainless steel with a wall thickness less than or equal to 0.06" (1.5 mm) to a maximum of 180°. BR02437 USD 135.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ridgid-400-series-hardline-bender-3-8.html
Tire Chuck
Rating:
0%
100 0

$7.96

Tire Chuck https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/i/tire-chuck-1b.jpg Since you already have a tank full of compressed air, you might as well run air tools off of it right? Pair this tire chuck with an air tool hose to be able to fill your vehicle's tires! Tire Chuck USD 7.96 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/tire-chuck.html
Hard Line Cutter
Rating:
100%
100 1

$20.00

Hard Line Cutter https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/h/a/hard-line-cutter-black.jpg This hard line cutter is designed to give you square, 90º cuts even close to flared ends. The hardened alloy steel cutting wheel is great for most metals like aluminum, copper, brass, plastic, and mild steel (thin wall). It also has a fold-away reamer for deburring your cut pipe. BR27328 USD 20.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/hardline-cutter.html
Aluminum Hard Line (3/8" - 3')
Rating:
100%
100 1

$25.00

Aluminum Hard Line (3/8" - 3') https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/l/aluminium_hardline.jpg Thinking about doing a fancy management setup? Hard lines are the key to success. Aluminum hard line is great since the material has less impurities than copper and will give you more consistent bends than copper hard line. Aluminum hard line is still soft enough to get creative without too much effort. Pair a couple 3ft segments of this hard line with a Ridgid 400 Series Hard Line Bender as well as a Hard Line Cutter and go to town! BR01020 USD 25.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/aluminum-hardline-3-8.html
Female Air Tool Plug
Rating:
0%
100 0

$6.50

Female Air Tool Plug https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/e/female-air-tool-plug-1b_1.jpg Since you already have a tank full of compressed air, you might as well run air tools off of it right? Use this female air tool plug as a quick connection so you can get the job done! BR00488 USD 6.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/female-air-tool-plug.html
Bag Riders Air Line Cutter
Rating:
100%
100 3

$10.00

Bag Riders Air Line Cutter https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-air-line-cutter_1.jpg Cutting your air line at a 90º angle is extremely important, especially when it comes to push to connect fittings. These air line cutters are designed to give you the straightest cut to ensure a solid seal. BR00094 USD 10.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-line-cutter.html
Gauge Air Line (1/8 Inch)
Rating:
0%
100 0

$0.43

Gauge Air Line (1/8 Inch) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/i/air_line_eighth_inch.jpg This air line is used for gauges and should not be used to feed air springs. It is sold by the foot and a quantity of one (1) equals one (1) foot of air line. If you are looking for 1/4", 3/8", or 1/2" air line, check out the DOT Air Line. BR00163 USD 0.43 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gauge-air-line-1-8-inch.html
Male Air Tool Plug
Rating:
0%
100 0

$7.00

Male Air Tool Plug https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/male-air-tool-plug-2b_2.jpg Since you already have a tank full of compressed air, you might as well run air tools off of it right? Use this male air tool plug as a quick connection so you can get the job done! BR00073 USD 7.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/male-air-tool-plug.html
Female Air Tool Coupler
Rating:
0%
100 0

$8.67

Female Air Tool Coupler https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/e/female-air-tool-coupler-11b.jpg Since you already have a tank full of compressed air, you might as well run air tools off of it right? Use this female air tool coupler as a quick connection so you can get the job done! BR00490 USD 8.67 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/female-air-tool-coupler.html
Male Air Tool Coupler
Rating:
0%
100 0

$8.72

Male Air Tool Coupler https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/male-air-tool-coupler-1b_1.jpg Since you already have a tank full of compressed air, you might as well run air tools off of it right? Use this male air tool coupler as a quick connection so you can get the job done! BR00071 USD 8.72 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/male-air-tool-coupler.html
DOT Air Line
Rating:
100%
100 7

$0.73

DOT Air Line https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/o/dot-air-line.jpg This air line is DOT Approved and is sold by the foot. A quantity of one (1) equals one (1) foot of air line. A quantity of ten (10) equals ten (10) feet of air line. DOT air line is limited to 1/4", 3/8" and 1/2" sizes. For 1/8" air line check out Gauge Air Line. DOT Air Line USD 0.73 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/dot-air-line.html
DOT PTC Inflation Valve (1/4" PTC)
Rating:
100%
100 2

$9.50

DOT PTC Inflation Valve (1/4" PTC) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/a/i/air-lift-inflation-valve-2b.jpg This DOT PTC inflation valve is a standard Schrader valve combined with a 1/4" PTC fitting. Simply plug 1/4" air line into the end of the PTC inflation valve to allow for easy inflation. This fitting is commonly used to inflate / deflate your air tank (see Air Tank Drain Kit). It can also be used as a temporary way to fill and deflate each corner of your car without a complete management setup. BR00753 USD 9.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ptc-inflation-valve.html
Manual Paddle Valve
Rating:
100%
100 1

$25.00

Manual Paddle Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/manual_paddle_valve_01.jpg Each Manual Paddle Valve features two valves that function as a fill and dump for your air springs. The backside of the paddle has two barb fittings that connect directly to 1/4" air line; no additional fittings required. Grab four of these or the Manual Paddle Valve Kit to make your control system into an industry standard eight valve setup. For easier installation, the Manual Paddle Valve Mounting Plate can be purchased separately. BR00066 USD 25.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/manual-paddle-valve-21703.html
Manual Paddle Valve Kit
Rating:
0%
100 0

$120.00

Manual Paddle Valve Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/manual_paddle_valve_kit_base_2b.jpg Piecing together a manual management setup? The Manual Paddle Valve Kit is the key to controlling your air suspension. Each paddle features two valves which function as a fill and dump for each corner of your vehicle. This kit includes four paddle valves (totaling eight valves) and an aluminum mounting plate for easier installation. BR00067 USD 120.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/manual-paddle-valve-kit.html
SMC Flow Control Valve
Rating:
100%
100 2

$12.00

SMC Flow Control Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/l/flow-control-1.jpg Flow control valves are used to slow down the rate at which each bag inflates and deflates. On most cars, the front and rear suspension raises and lowers at different rates because of the weight distribution of the car. These flow controls can be used to solve this issue and give you a nice, even four corner lift and drop. Add fittings matched to your line size to install these flow controls on the air line going to each bag. SMC Flow Control Valve USD 12.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/smc-flow-control-valve.html
SMC Check Valve
Rating:
100%
100 5

$25.00

SMC Check Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/m/smc-check-valve-1.jpg Check valves, sometimes referred to as “one way valves” or “non-return valves” are common components found in air management systems. These SMC check valves are generally used on each supply line from the tank to the manifold in order to prevent back-flow from your air springs in the event that your air tank were to depressurize. Great to have for doing maintenance on your tank / management when you want your car to be at a raised height to save your back. SMC Check Valve USD 25.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/smc-check-valve.html
RideTech RidePro Big Red Manifold
Rating:
0%
100 0

$1,195.00

RideTech RidePro Big Red Manifold https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ride_tech_big_red_manifold._01.jpg The RideTech RidePro Big Red Manifold features 3/8" valves that flow faster than the standard RidePro Manifold. If you want to raise and lower your vehicle quickly, this is the manifold for you. The Big Red Manifold is designed to operate 4 air springs (front and rear). The manifold has 8 - 3/8" actuators on top, 4 to inflate and 4 to deflate. The Big Red manifold has 4 - 1/4" delivery ports, 4 - 1/8" gauge ports, 2 - 1/4" supply ports, and 2 - 1/4" exhaust ports. BR02069 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ridetech-ridepro-big-red-manifold.html
RideTech RidePro Manifold
Rating:
0%
100 0

$575.00

RideTech RidePro Manifold https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ride_tech_manifold_01.jpg The RidePro Manifold from RideTech is a reliable NPT manifold that uses 1/4" valves with 1/4" ports. Do the PTC manifolds cramp your style? Grab one of these and use the fittings of your choice to finish off your custom trunk setup. The RidePro Manifold is plug and play with RideTech's RidePro Digital System. BR02068 USD 575.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ridetech-ridepro-manifold.html
Slam Specialties SV-8C Manifold (4 Corner)
Rating:
100%
100 1

$519.99

Slam Specialties SV-8C Manifold (4 Corner) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/l/slam_specialties_sv8c_manifold_1.jpg The SV-8C Manifold from Slam Specialties is a 3/8"PTC, 4-corner setup that is a compact and reliable option for your valve system. The SV-8C's internal dump mufflers keep things quiet and the small size allows for easy installation in tighter spots. Plug and play with the Slam Specialties MC.2 Controller (sold separately). This manifold is rated to 200 PSI and comes with DOT approved PTC fittings to keep air lines snug and in place. Features: LED light up logo Rated @ 200 PSI Dual 3/8"PTC tank inlets (4) 3/8"PTC bag ports Slot port exhaust w/ integrated mufflers Water resistant plug w/ included harness Mounting hardware 1 year warranty Includes: (1) SV-8C manifold (1) Wire harness Mounting hardware BR02616 USD 519.99 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/slam-specialties-sv-8c-manifold.html

Page

Page Previous
Page 366
Page 367
You're currently reading page 368
Page 369
Page 370
Page Next








Tell us about your Vehicle: