My Cart
Search
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle

Search results for: 'd2 racing' - Page 5

Items 97-120 of 911

Set Descending Direction
Products Browse a collection of products en
  1. Porsche Cayman 987 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for Porsche Boxster & Cayman 987
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Porsche Boxster & Cayman 987 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Porsche Boxster & Cayman 987's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Porsche Boxster & Cayman 987's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Porsche Boxster & Cayman 987 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Porsche Boxster & Cayman 987, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05241 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  2. Volvo XC40 FWD AWD D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for Volvo XC40
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Volvo XC40 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_2_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Volvo XC40's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Volvo XC40's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Volvo XC40 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Volvo XC40, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR13644 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  3. d2_racing_MacPherson-DB_and_SS&S-DB
    D2 Racing Air Suspension for Mini Countryman F60
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Mini Countryman F60 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mini Countryman F60 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mini Countryman F60: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mini Countryman F60. *Actual Product Not Displayed BR08790 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  4. d2_racing_MacPherson-DB_and_Strut-Sleeve
    D2 Racing Air Suspension for Mitsubishi Eclipse 3G
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Mitsubishi Eclipse 3G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mitsubishi Eclipse 3G features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mitsubishi Eclipse 3G: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mitsubishi Eclipse 3G. *Actual Product Not Displayed BR03150 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  5. d2_racing_MacPherson-DB_and_Strut-DB
    D2 Racing Air Suspension for Mini Countryman R60
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Mini Countryman R60 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mini Countryman R60 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mini Countryman R60: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mini Countryman R60. *Actual Product Not Displayed BR04131 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  6. d2_racing_Wishbone-Sleeve_and_Strut-Sleeve
    D2 Racing Air Suspension for Aston Martin DB9
    Rating:
    0%
    100 0
    $4,140.00
    D2 Racing Air Suspension for Aston Martin DB9 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit.jpg D2 Racing air suspension for the Aston Martin DB9 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Aston Martin DB9: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Aston Martin DB9. *Actual Product Not Displayed BR13604 USD 4140.00 https://schema.org/NewCondition https://schema.org/InStock
  7. Mercedes Benz GLK X204 D2 Racing Air Ride Suspension Kit
    D2 Racing Air Suspension for Mercedes GLK X204
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Mercedes GLK X204 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mercedes GLK X204 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mercedes GLK X204: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mercedes GLK X204. *Actual Product Not Displayed BR17409 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  8. D2 Racing RS Coilovers for Subaru WRX STI GD
    D2 Racing RS Coilovers for Subaru WRX STI GD
    Rating:
    0%
    100 0
    $1,080.00
    D2 Racing RS Coilovers for Subaru WRX STI GD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_3.jpg The D2 Racing RS Coilover Kit for the Subaru WRX STI GD is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Subaru WRX STI GD a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR07623 USD 1080.00 https://schema.org/NewCondition https://schema.org/InStock
  9. D2 Racing RS Coilovers for Aston Martin Rapide S
    D2 Racing RS Coilovers for Aston Martin Rapide S
    Rating:
    0%
    100 0
    $2,700.00
    D2 Racing RS Coilovers for Aston Martin Rapide S https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_3.jpg The D2 Racing RS Coilover Kit for the Aston Martin Rapide S is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Aston Martin Rapide S a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR13626 USD 2700.00 https://schema.org/NewCondition https://schema.org/InStock
  10. D2 Racing RS Coilovers for Mitsubishi Lancer Evo X
    D2 Racing RS Coilovers for Mitsubishi Lancer Evo X
    Rating:
    0%
    100 0
    $1,080.00
    D2 Racing RS Coilovers for Mitsubishi Lancer Evo X https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-rs-series-coilovers_2.jpg The D2 Racing RS Coilover Kit for the Mitsubishi Lancer Evo X is a 36-way damping and rebound adjustable monotube coilover setup that's ideal for a modified street car that also sees occasional track days. This D2 Racing coilover kit uses separate height and preload adjustment to fine-tune ride height and handling without sacrificing full strut travel. Features 36 way damping adjustable monotube shock assemblies Full ride height adjustability with threaded shock bodies and separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools Converting D2 Racing RS Coilovers to Air Suspension The RS Series coils can easily be converted from coilovers to air suspension. Thanks to their fully-threaded shock bodies, these coilovers convert to a full air suspension setup by removing the coil springs and threading on a set of coilover conversion bags in their place. This makes the D2 coilovers a practical starting point for those who want coilover-level adjustability now but may want to move to air suspension later on. Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Whether you're chasing a cleaner stance, sharper handling, or both, the D2 Racing RS Series Coilover Kit gives the Mitsubishi Lancer Evo X a solid foundation to build on. Have questions about fitment, adjustment range, or converting to air suspension down the road? The Bag Riders team is happy to help you pick the right setup. *Actual Product Not Displayed BR07563 USD 1080.00 https://schema.org/NewCondition https://schema.org/InStock
  11. d2_racing_wishbone-sleeve_and_ss_s-db
    D2 Racing Air Suspension for Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Tesla Model 3 & Y RWD features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Tesla Model 3 & Y RWD: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Tesla Model 3 & Y RWD. *Actual Product Not Displayed BR15562 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  12. d2_racing_lowering_springs
    D2 Racing Lowering Springs for Mitsubishi Lancer Evo X
    Rating:
    0%
    100 0
    $200.00
    D2 Racing Lowering Springs for Mitsubishi Lancer Evo X https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_lowering_springs_11_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Want to lower your Mitsubishi Lancer Evo X, but on a budget? D2 Racing's lowering springs are the easiest way to get a lower ride height without breaking the bank. Designed as a direct replacement for your Mitsubishi Lancer Evo X's factory springs, these lowering springs work with your factory dampers, so no need to upgrade your entire suspension to transform your stance. Improved Handling, Progressive Rate Design These D2 Racing lowering springs for the Mitsubishi Lancer Evo X are engineered to improve handling characteristics by reducing ride height while maintaining exceptional ride quality through a progressive rate spring design. The result is a comfortable ride under normal conditions with firmer, more controlled handling during aggressive driving - giving you reduced body roll and sharper cornering without sacrificing everyday comfort. Premium Materials & Construction Each spring is cold-wound from 55 chrome silicon steel for a consistent spring rate and long-term durability, then manufactured in an ISO 9001 and TUV approved facility. A corrosion-resistant coating helps extend the life of your springs, so your Mitsubishi Lancer Evo X stays lowered and looking sharp for the long haul. Easy, Direct-Fit Installation D2 Racing Lowering Springs are designed to install using your vehicle's stock mounting points, with no modification required. They're tuned to work with factory shocks, though pairing with performance shocks is recommended for the best handling results. What's Included Direct replacement for factory springs Compatible with factory or performance shocks/dampers Progressive rate spring design Cold-wound 55 chrome silicon steel construction Corrosion-resistant coating No-modification, stock mounting point installation Backed by D2 Racing's limited lifetime warranty against manufacturing defects *Actual product not displayed BR14496 USD 200.00 https://schema.org/NewCondition https://schema.org/InStock
  13. Tesla Model 3 Model Y AWD D2 Racing Air Ride Suspension Kit
    D2 Racing Air Suspension for Tesla Model 3 & Y AWD
    Rating:
    0%
    100 0
    $2,610.00
    D2 Racing Air Suspension for Tesla Model 3 & Y AWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Tesla Model 3 & Y AWD features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Tesla Model 3 & Y AWD: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Tesla Model 3 & Y AWD. *Actual Product Not Displayed BR15563 USD 2610.00 https://schema.org/NewCondition https://schema.org/InStock
  14. d2_racing_wishbone-sleeve_and_strut-sleeve
    D2 Racing Air Suspension for Jaguar XJ X350
    Rating:
    0%
    100 0
    $2,700.00
    D2 Racing Air Suspension for Jaguar XJ X350 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_1.jpg D2 Racing air suspension for the Jaguar XJ X350 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Jaguar XJ X350: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Jaguar XJ X350. *Actual Product Not Displayed BR15554 USD 2700.00 https://schema.org/NewCondition https://schema.org/InStock
  15. d2_racing_Wishbone-Sleeve_and_SS&S-DB
    D2 Racing Air Suspension for Infiniti G37 Convertible
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Infiniti G37 Convertible https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_1.jpg D2 Racing air suspension for the Infiniti G37 Convertible features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Infiniti G37 Convertible: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Infiniti G37 Convertible. *Actual Product Not Displayed BR06236 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  16. d2_racing_MacPherson-DB_and_Strut-Sleeve
    D2 Racing Air Suspension for Mitsubishi Eclipse 1G
    Rating:
    0%
    100 0
    $2,160.00
    D2 Racing Air Suspension for Mitsubishi Eclipse 1G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mitsubishi Eclipse 1G features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mitsubishi Eclipse 1G: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mitsubishi Eclipse 1G. *Actual Product Not Displayed BR03147 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock
  17. d2_racing_MacPherson-DB_and_Strut-Sleeve
    D2 Racing Air Suspension for Mitsubishi Lancer Evo 7 8 9
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Suspension for Mitsubishi Lancer Evo 7 8 9 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2-racing-air-suspension-four-corner-kit_2.jpg D2 Racing air suspension for the Mitsubishi Lancer Evo 7 8 9 features fully threaded, 36-way damping adjustable struts with adjustable lower mounts for precise ride height and ride quality tuning. What's Included in This Air Suspension Kit This is a complete front and rear kit that includes the air suspension for all four corners of your Mitsubishi Lancer Evo 7 8 9: D2 Racing front air suspension D2 Racing rear air suspension (4) 1/4" tube - 1/8" BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs 36-Way Damping Adjustable Struts Each D2 Racing shock features a 36-way damping adjustable internal damper, built to RS-Series quality standards with air suspension specific valving that accounts for PSI changes as you adjust ride height. Turn the included knobs to move between a softer, daily-comfort setting and a firmer, more responsive feel - no tools required once installed. Threaded Lower Mount Just like a traditional coilover, the shock body itself is fully threaded on the D2 Racing shocks. Spin the lower mount up or down to set the baseline length of the shock, giving you the ultimate range of ride height adjustment without sacrificing stroke travel or bag pressure. Complete Your Air Ride Setup This D2 Racing setup handles the air suspension - you'll still need an air management system to control them though. Check out the Bag Riders PRO Control System for plug-and-play air pressure control with three presets heights and a 2-year warranty, or explore our full lineup of management packages to match your build and budget. Prefer an all-in-one solution? Take a look at our complete air ride kits. If you're unsure what fits, hit us up. Our support team rides on air and we're more than happy to chat to help you spec the right setup for your Mitsubishi Lancer Evo 7 8 9. *Actual Product Not Displayed BR03152 USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  18. d2_racing_camber_plates
    D2 Racing Front Camber Plates for Mazda RX-7 FC
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Mazda RX-7 FC https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_2_1.jpg Fine-tune your Mazda RX-7 FC's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Mazda RX-7 FC's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Mazda RX-7 FC for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Mazda RX-7 FC, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05202 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  19. d2_racing_camber_plates
    D2 Racing Front Camber Plates for Mitsubishi 3000GT
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Mitsubishi 3000GT https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Mitsubishi 3000GT's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Mitsubishi 3000GT's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Mitsubishi 3000GT for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Mitsubishi 3000GT, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05148 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  20. Acura RSX DC5 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for Acura RSX DC5
    Rating:
    100%
    100 1
    $300.00
    D2 Racing Front Camber Plates for Acura RSX DC5 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_2.jpg Fine-tune your Acura RSX DC5's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Acura RSX DC5's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Acura RSX DC5 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Acura RSX DC5, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR14786 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  21. Mini Clubman F54 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for Mini Clubman F54
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Mini Clubman F54 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_9_1_1_1_1_2_3.jpg Fine-tune your Mini Clubman F54's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Mini Clubman F54's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Mini Clubman F54 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Mini Clubman F54, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR07355 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  22. Nissan Cube Z12 D2 Racing Front Camber Plate Set
    D2 Racing Front Camber Plates for Nissan Cube Z12
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Nissan Cube Z12 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Nissan Cube Z12's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Nissan Cube Z12's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Nissan Cube Z12 for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Nissan Cube Z12, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05232 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  23. d2_racing_camber_plates
    D2 Racing Front Camber Plates for Mitsubishi Eclipse 4G
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Mitsubishi Eclipse 4G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Fine-tune your Mitsubishi Eclipse 4G's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Mitsubishi Eclipse 4G's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Mitsubishi Eclipse 4G for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Mitsubishi Eclipse 4G, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05217 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
  24. d2_racing_camber_plates
    D2 Racing Front Camber Plates for Lexus CT200h
    Rating:
    0%
    100 0
    $300.00
    D2 Racing Front Camber Plates for Lexus CT200h https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_camber_plates_8_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1.jpg Fine-tune your Lexus CT200h's suspension geometry with D2 Racing Camber Plates. Engineered to work seamlessly with D2's MacPherson strut-style air struts or as a direct replacement for the camber plates included with D2 coilover kits. Precise camber and caster adjustment lets you dial in your Lexus CT200h's alignment for aggressive stance, improved handling, or optimized tire wear. Precise Camber & Caster Adjustment D2 Racing Camber Plates give you the ability to fine-tune camber and caster independently, so you can set up your Lexus CT200h for the exact alignment your build calls for. Whether that's an aggressive stance, dialed-in daily alignment, or a track-focused setup that needs to hold tire wear in check. Built for D2 Racing Air Struts & Coilovers Designed to bolt directly onto D2 Racing MacPherson strut-style air struts, these camber plates also work as a direct replacement for the camber plates included with D2 coilover kits on your Lexus CT200h, making them an easy upgrade if your factory-included plates are worn out or you're building a setup from separate components. Key Features Compatible with D2 Racing MacPherson strut air struts and D2 coilover systems Enables precise camber and caster adjustment for improved handling and alignment Direct replacement/upgrade for factory-included D2 camber plates Ideal for stance, performance, and track-focused builds BR05179 USD 300.00 https://schema.org/NewCondition https://schema.org/InStock
Page