Search results for: 'jetta' - Page 5
Products Browse a collection of products en
Universal Air Solution Series Air Suspension for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2Universal Air Solution Series Air Suspension for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__2_1_1_2_1_2_1_2_1_1_1_1_1_1_1_2_1_1_1.jpg The Universal Air Solution Series for the VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 is a vehicle-specific, made-to-order air suspension package built to solve the two biggest complaints with aftermarket air ride: bags that sit too tall or too fat to clear tires and suspension components, and a ride that's either too stiff or too soft to live with daily. Solution Series pairs Universal Air's air springs with proprietary fully threaded dampers to deliver the lowest compressed height, the widest usable travel range, and a ride quality tuned specifically for air. Hand-Built, Vehicle-Specific Fit Universal Air hand-builds every Solution Series kit to order, selecting from over 20 proprietary bag designs to match the exact geometry of your VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2. That means the compressed height, travel range, and clearance are dialed in for your application instead of forced to fit it. Threaded Dampers Built for Air Universal Air developed these dampers directly with a top-tier damper manufacturer and tuned them specifically for vehicles running air suspension. They're stiff enough for performance driving and relaxed enough for daily comfort. The threaded damper bodies allow you to extend or shorten the suspension without sacrificing stroke travel or bag pressure. Premium Construction Throughout Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for comfort Sealed rotary thrust bearings keep dirt and moisture out of the assembly 6061-T6 aluminum, hard-anodized bag end caps for long-term durability Premium 'AN'-style leader lines with a synthetic rubber core and woven stainless-steel mesh reinforcement braided nylon outer sleeve Stainless steel hardware with in-house-milled 6061 aluminum brackets, paired with urethane bushings or pillow-ball bearings depending on application What's Included Universal Air Solution Series front suspension for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 Universal Air Solution Series rear suspension for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 (2) Spanner tools Fittings *Actual product not displayed BR13416 USD 2659.32 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-golf-gti-jetta-mk5-mk6-audi-a3-universal-air-solution-series-suspension-kit.html$2,659.32
- BC Racing BR Series Coilovers (Extreme Low) for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2BC Racing BR Series Coilovers (Extreme Low) for VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Golf/GTI/Jetta Mk5 Mk6 & Audi A3/TT Mk2 aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW Mk5/Mk6} BC Racing BR Type Coilover Kit (Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-mk6-golf-gti-jetta-audi-a3-tt-bc-racing-br-type-coilover-kit-extreme-low.html$1,345.00
- BC Racing BR Series Coilovers (Extreme Low) for VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2013 (50mm)BC Racing BR Series Coilovers (Extreme Low) for VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2013 (50mm) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2013 (50mm) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2013 (50mm) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW Mk6 S Twistbeam} BC BR Coilover Kit (50mm - Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-jetta-mk6-s-beetle-twistbeam-50mm-bc-racing-br-type-coilover-kit-extreme-low.html$1,345.00
- BC Racing BR Series Coilovers (Extreme Low) for VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2014 (55mm)BC Racing BR Series Coilovers (Extreme Low) for VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2014 (55mm) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc-racing-br-series-coilover-kit_4.jpg BC Racing BR Series Extreme Low Coilovers for the VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2014 (55mm) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the VW Beetle 2.5/TDI & Jetta Mk6 S 2011-2014 (55mm) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed {VW Mk6 S Twistbeam} BC BR Coilover Kit (55mm - Extreme Low) USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-jetta-mk6-s-beetle-twistbeam-55mm-bc-racing-br-type-coilover-kit-extreme-low.html$1,345.00
Bilstein Sport Rear ShocksBilstein Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/i/bilstein_sport_shocks_6.jpg Bilstein has always been at the forefront of handling and ride quality. These Bilstein Sport shocks feature aggressive damping with shortened strut bodies that allow you to ride lower without losing the comfort and handling characteristics that you expect from a sport suspension. BR01068 USD 358.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk6-jetta-twistbeam-bilstein-sport-rear-shocks.html$358.00
Bag Riders Adjustable End LinksBag Riders Adjustable End Links https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/u/super-low-end-links-black_5.jpg Bagged cars are sick, but you know what's not? Binding sway bars. With these high quality adjustable end links, you will be able to eliminate any binding issues your sway bar has on your lowered vehicle. BR26510-1 USD 125.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-mk6-awd-twistbeam-bag-riders-super-low-adjustable-end-links.html$125.00
Bag Riders PRO Pre-Configured Air Ride Kit - VW Golf & GTI Mk5/Mk6Bag Riders PRO Pre-Configured Air Ride Kit - VW Golf & GTI Mk5/Mk6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_13.jpg This pre-configured Bag Riders PRO air ride kit for the Mk5/Mk6 VW Golf & GTI is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. You can pair this with either our Super Low Air Suspension for the ultimate package, or GT Series Air Suspension for the best bang-for-your-buck. Includes: Bag Riders Super Low Air Suspension OR Bag Riders GT Series Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! GT Series Features: Threaded, height-adjustable shock bodies 32-way adjustable damping Aluminum bag endcaps Camber plates on applicable vehicles 1-year limited warranty Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty {VW Mk5/Mk6} Bag Riders PRO Pre-Configured Air Ride Kit USD 3885.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-pro-pre-configured-air-ride-kit-vw-golf-gti-mk5-mk6.htmlSale Price $3,885.00
Rennline Skid PlateRennline Skid Plate https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/e/rennline_mk5_mk6_skid_plate_1.jpg Protect the vitals of your Mk5 / Mk6 platform car with this stainless steel skid plate from Rennline. Unlike many skid plates on the market, Rennline's conceals the entire lower engine compartment and is formed so that no edges will get caught on objects while traveling forward, backwards, or sideways. Hardware and installation instructions are included with each skid plate for hassle free install. BR00969 USD 380.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-mk6-gti-golf-jetta-r32-audi-tt-a3-rennline-skid-plate.html$380.00
Koni STR.T Rear ShocksKoni STR.T Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_strt_rear_shocks_1_1_1_1_1_1.jpg Koni's entry level performance STR.T (pronounced "street") shocks are designed to improve handling of lowered vehicles. These STR.T shocks come with slightly higher damping forces than your OE shock which allows them to pair well with stiffer lowering springs or air springs, but they do not feature damping adjustment like Koni's premium "Sport" line. The Koni STR.T shocks provides performance at a value price point and come with a lifetime warranty. BR06178 USD 237.55 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk5-mk6-gti-golf-jetta-koni-str-t-rear-shocks.html$237.55
Koni Sport Rear ShocksKoni Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_sport_shocks_10.jpg Koni is the industry leader of adjustable damping shocks for both daily drivers and weekend warriors alike. The adjustable damping feature allows these shocks to pair well with stiffer lowering springs or air springs and gives you the ability to dial in your comfort level. Need instructions for adjusting your Koni Sport Shocks? Look no further! We’ve got you covered in our Air Ride F.A.Q. BR01117 USD 307.08 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-golf-gti-jetta-r32-mk5-mk6-audi-tt-s3-awd-koni-sport-rear-shocks.html$307.08
Bilstein Sport Rear ShocksBilstein Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/i/bilstein_sport_shocks_5.jpg Bilstein has always been at the forefront of handling and ride quality. These Bilstein Sport shocks feature aggressive damping with shortened strut bodies that allow you to ride lower without losing the comfort and handling characteristics that you expect from a sport suspension. BR01067 USD 278.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-golf-gti-jetta-r32-mk5-mk6-audi-tt-awd-bilstein-sport-rear-shocks.html$278.00
Koni STR.T Rear ShocksKoni STR.T Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_strt_rear_shocks_1_1_1_1_1.jpg Koni's entry level performance STR.T (pronounced "street") shocks are designed to improve handling of lowered vehicles. These STR.T shocks come with slightly higher damping forces than your OE shock which allows them to pair well with stiffer lowering springs or air springs, but they do not feature damping adjustment like Koni's premium "Sport" line. The Koni STR.T shocks provides performance at a value price point and come with a lifetime warranty. BR06177 USD 208.58 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk4-gti-golf-jetta-koni-str-t-rear-shocks.html$208.58
Koni Sport Rear ShocksKoni Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/o/koni_sport_shocks_8.jpg Koni is the industry leader of adjustable damping shocks for both daily drivers and weekend warriors alike. The adjustable damping feature allows these shocks to pair well with stiffer lowering springs or air springs and gives you the ability to dial in your comfort level. Need instructions for adjusting your Koni Sport Shocks? Look no further! We’ve got you covered in our Air Ride F.A.Q. BR01115 USD 324.46 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk4-golf-gti-jetta-beetle-koni-sport-rear-shocks.html$324.46
Bilstein Sport Rear ShocksBilstein Sport Rear Shocks https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/i/bilstein_sport_shocks_3.jpg Bilstein has always been at the forefront of handling and ride quality. These Bilstein Sport shocks feature aggressive damping with shortened strut bodies that allow you to ride lower without losing the comfort and handling characteristics that you expect from a sport suspension. BR01065 USD 238.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vw-mk4-new-beetle-golf-gti-jetta-audi-a3-8l-tt-mk4-bilstein-sport-rear-shocks.html$238.00
