Search results for: 'nissan' - Page 5
Products Browse a collection of products en
AccuAir ENDO Air Ride Kit for Nissan 300ZX Z32AccuAir ENDO Air Ride Kit for Nissan 300ZX Z32 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan 300ZX Z32 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan 300ZX Z32. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan Z32} AccuAir ENDO Air Ride Kit USD 4362.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-300zx-z32-accuair-endo-air-ride-kit.htmlSale Price $4,362.00 AccuAir ENDO Air Ride Kit for Nissan GT-R R35 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan GT-R R35 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan GT-R R35. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan R35} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-gt-r-r35-accuair-endo-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Nissan Sentra 8th GenSlam Specialties Analog Air Ride Kit for Nissan Sentra 8th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan Sentra 8th Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan B18} Slam Specialties Analog Air Ride Kit USD 2769.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-8th-gen-slam-specialties-analog-air-ride-kit.htmlSale Price $2,769.00 Bag Riders PRO Air Ride Kit for Nissan 300ZX Z32 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the Nissan 300ZX Z32 is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Nissan Z32} Bag Riders PRO Air Ride Kit USD 2839.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-300zx-z32-bag-riders-pro-air-ride-kit.html
Bag Riders PRO Air Ride Kit for Nissan GT-R R35 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the Nissan GT-R R35 is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Nissan R35} Bag Riders PRO Air Ride Kit USD 2675.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-gt-r-r35-bag-riders-pro-air-ride-kit.html
Bag Riders Manual Air Ride Kit for Nissan Sentra 8th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan Sentra 8th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan B18} Bag Riders Manual Air Ride Kit USD 2054.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-8th-gen-bag-riders-manual-air-ride-kit.html
Bag Riders Manual Air Ride Kit for Nissan Altima 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan Altima 6th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan A37} Bag Riders Manual Air Ride Kit USD 2086.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-altima-l34-bag-riders-manual-air-ride-kit.html
Bag Riders Manual Air Ride Kit for Nissan Sentra 7th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan Sentra 7th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan B17} Bag Riders Manual Air Ride Kit USD 2896.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-b17-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Nissan Altima 6th GenSlam Specialties Analog Air Ride Kit for Nissan Altima 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan Altima 6th Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan A37} Slam Specialties Analog Air Ride Kit USD 2801.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-altima-l34-slam-specialties-analog-air-ride-kit.htmlSale Price $2,801.00
Slam Specialties Analog Air Ride Kit for Nissan Sentra 7th GenSlam Specialties Analog Air Ride Kit for Nissan Sentra 7th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan Sentra 7th Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan B17} Slam Specialties Analog Air Ride Kit USD 3611.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-b17-slam-specialties-analog-air-ride-kit.htmlSale Price $3,611.00 Bag Riders Manual Air Ride Kit for Nissan Sentra 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan Sentra 5th Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan B15} Bag Riders Manual Air Ride Kit USD 2896.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-b15-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Nissan Sentra 5th GenSlam Specialties Analog Air Ride Kit for Nissan Sentra 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan Sentra 5th Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan B15} Slam Specialties Analog Air Ride Kit USD 3611.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-b15-slam-specialties-analog-air-ride-kit.htmlSale Price $3,611.00 Bag Riders Manual Air Ride Kit for Nissan Versa 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Nissan Versa 1st Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Nissan C11} Bag Riders Manual Air Ride Kit USD 2086.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-versa-c11-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Nissan Versa 1st GenSlam Specialties Analog Air Ride Kit for Nissan Versa 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Nissan Versa 1st Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Nissan C11} Slam Specialties Analog Air Ride Kit USD 2801.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-versa-c11-slam-specialties-analog-air-ride-kit.htmlSale Price $2,801.00
Maxload P2 Air Ride Kit for Nissan Versa 1st GenMaxload P2 Air Ride Kit for Nissan Versa 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Nissan Versa 1st Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Manifold Power Harness Compressor Power Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan C11} Maxload P2 Air Ride Kit USD 3116.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-versa-1st-gen-maxload-p2-air-ride-kit.htmlSale Price $3,116.00
Maxload P2 Air Ride Kit for Nissan Sentra 8th GenMaxload P2 Air Ride Kit for Nissan Sentra 8th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Nissan Sentra 8th Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Manifold Power Harness Compressor Power Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan B18} Maxload P2 Air Ride Kit USD 3084.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-8th-gen-maxload-p2-air-ride-kit.htmlSale Price $3,084.00
Maxload P2 Air Ride Kit for Nissan Sentra 7th GenMaxload P2 Air Ride Kit for Nissan Sentra 7th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Nissan Sentra 7th Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Manifold Power Harness Compressor Power Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan B17} Maxload P2 Air Ride Kit USD 3926.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-7th-gen-maxload-p2-air-ride-kit.htmlSale Price $3,926.00
Maxload P2 Air Ride Kit for Nissan Sentra 5th GenMaxload P2 Air Ride Kit for Nissan Sentra 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Nissan Sentra 5th Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Manifold Power Harness Compressor Power Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan B15} Maxload P2 Air Ride Kit USD 3926.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-5th-gen-maxload-p2-air-ride-kit.htmlSale Price $3,926.00
Maxload P2 Air Ride Kit for Nissan Altima 6th GenMaxload P2 Air Ride Kit for Nissan Altima 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Nissan Altima 6th Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Manifold Power Harness Compressor Power Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Nissan A37} Maxload P2 Air Ride Kit USD 3116.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-altima-6th-gen-maxload-p2-air-ride-kit.htmlSale Price $3,116.00
AccuAir ENDO Air Ride Kit for Nissan Versa 1st GenAccuAir ENDO Air Ride Kit for Nissan Versa 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Versa 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Versa 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan C11} AccuAir ENDO Air Ride Kit USD 4450.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-versa-1st-gen-accuair-endo-air-ride-kit.htmlSale Price $4,450.00
AccuAir ENDO Air Ride Kit for Nissan Sentra 8th GenAccuAir ENDO Air Ride Kit for Nissan Sentra 8th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Sentra 8th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Sentra 8th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan B18} AccuAir ENDO Air Ride Kit USD 4418.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-8th-gen-accuair-endo-air-ride-kit.htmlSale Price $4,418.00 AccuAir ENDO Air Ride Kit for Nissan Sentra 7th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Sentra 7th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Sentra 7th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan B17} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-7th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Nissan Sentra 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Sentra 5th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Sentra 5th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan B15} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-sentra-5th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Nissan Altima 6th GenAccuAir ENDO Air Ride Kit for Nissan Altima 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Nissan Altima 6th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Nissan Altima 6th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Nissan A37} AccuAir ENDO Air Ride Kit USD 4450.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/nissan-altima-6th-gen-accuair-endo-air-ride-kit.htmlSale Price $4,450.00


