Search results for: 'm3' - Page 587
Products Browse a collection of products en
D2 Racing Sleeve Style BagD2 Racing Sleeve Style Bag https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_sleeve_style_replacement_bag.jpg Attention: D2 Racing requires a photo of the bag that you are replacing. They have changed certain bag designs and want to be sure you receive the correct part. Please send a photo of the bag being replaced to [email protected]. This product may take up to 4-8 weeks for delivery depending on manufacturer stock levels. There is an option for expedited shipping so if you're interested, please contact a Bag Riders Air Ride Specialist for more information. This is a replacement sleeve style bag for the D2 Racing threaded body struts. BR05130 USD 280.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/d2-racing-sleeve-style-bag.html$280.00
BC Racing BR Type Coilover KitBC Racing BR Type Coilover Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc_racing_coilovers.jpg These BR Type coilovers from BC Racing can also be used in conjunction with VERA double bellow and sleeve style bags. Simply remove the spring from the coilover body and thread on a set of VERA bags. Thinking about selling your car and transferring your air setup to the next one? Throw the springs back on the coilovers and move the VERA bags over to your next car! BC Racing BR Type Coilover Kit Mono-tube shock design Linear piston and damping curve Height adjustment via shock body 30 way damping adjustment Custom spring rates and valving available (call to order) 1 year warranty against manufacturer defects VERA bags VERA Slim Double Bellow Bags VERA Double Bellow Bags VERA Sleeve Style Bags BR04687 USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/cadillac-cts-ctsv-2nd-gen-bc-racing-br-type-coilover-kit.html$1,195.00
H&R Camber Bolt SetH&R Camber Bolt Set https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/u/subaru_gr_gd_gc_sti_wrx_hr_camber_bolt.jpg These specially designed bolts from H&R replace the original upper fastening bolts on your Subaru's struts, allowing for extra camber adjustment. As the bolt is turned, a small cam alters the vehicle's camber, allowing for adjustments from 0-3 degrees, positive or negative. Installation takes only minutes with hand tools so you can easily dial in the stance you're looking for. NOTES Camber bolts sold in pairs Works with front suspensions of all Subarus Works with the rear suspensions of the following applications: Subaru BD, GD, GD, GD STI BR02519 USD 75.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/subaru-impreza-wrx-sti-legacy-outback-brz-forester-h-r-camber-bolt-set.html$75.00
Red Ring ConnectorRed Ring Connector https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/e/red_ring_connector-2.jpg Red Ring Connector Red Ring Connector USD 0.79 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/red-ring-connector.html$0.79
Black Ring ConnectorBlack Ring Connector https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/l/black_ring_connector_1.jpg Black Ring Connector Black Ring Connector USD 0.79 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/black-ring-connector.html$0.79
Wired Manual Paddle ValveWired Manual Paddle Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/w/i/wired_manual_paddle_valve.jpg This paddle valve has the same functionality as the standard manual paddle valve but with added wires. These wires connect to the fill position on the paddle so that it can be used to turn on a compressor. The wired paddle valves are typically used in tankless setups where you need the compressor to run in order to fill your bags or air cups. Each wired manual paddle valve features two valves that function as a fill and dump for your air springs. BR01857 USD 70.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/wired-manual-paddle-valve.html$70.00 Loctite 243 Thread Locker https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/l/o/loctite_243_thread_locker.jpg Loctite 243 Thread Locker is ideal when you need to make sure a nut or bolt isn't going to loosen itself over time. Also used when replacing Air Lift Performance bags. Do not use Loctite 243 Thread Locker to seal fittings. BR01761 USD 4.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/loctite-243-thread-locker.html
SMC DOT Straight Cartridge https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/m/smc_dot_straight_cartidge.jpg The SMC DOT Straight Cartridge is a push to connect replacement unit. If the PTC ports on your Air Lift or AccuAir manifold happen to be leaking (and the air line going into them is cut at a perfect 90° angle), the o-ring inside of the port has most likely been damaged and will need to be replaced. SMC DOT Straight Cartridge USD 3.25 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/smc-dot-straight-cartridge.html
Viair 275C CompressorViair 275C Compressor https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/v/i/viair_100c_compressor-02.jpg The 275C compressor from Viair is great for smaller projects like motorcycles and mopeds. It has a maximum working pressure of 150 PSI so it's best for low pressure applications with small tanks (2.5 gallon or less). Stainless steel leader line Inline check valve Permanent magnetic motor Rubber isolated mounting feet Insulated electric terminals Max. air tank size: 2.5 gallon BR04484 USD 286.25 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/viair-275c-compressor.html$286.25
SMC Electric ValveSMC Electric Valve https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/s/m/smc_brass_valve_1.jpg Rather go with an old school valve setup over a manifold? Building something like an electric tank drain kit? These SMC Electric Valves are reliable and proven to last. SMC Electric Valve USD 60.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/smc-electric-valve.html$60.00
D2 Racing Air Ride Suspension KitD2 Racing Air Ride Suspension Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_macpherson-db_and_ss_s-db_27.jpg This suspension kit from D2 Racing features fully threaded, 36-way damping adjustable strut bodies to dial in the perfect height and ride quality of your vehicle. Kit Includes: D2 Racing front suspension D2 Racing rear suspension (4) 1/4” tube - 1/8” BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs BR04886 USD 2160.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-civic-10th-gen-d2-racing-air-ride-suspension-kit.html$2,160.00 Slam Specialties Analog Air Ride Kit for Honda Civic 10th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the {vehicle_name} is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Honda FC} Slam Specialties Analog Air Ride Kit USD 3110.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-civic-10th-gen-slam-specialties-analog-air-ride-kit.html


