Search results for: 'RA' - Page 83
Products Browse a collection of products en
AccuAir ENDO Air Ride Kit for Kia Forte 3rd Gen & Hyundai Elantra 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Kia Forte 3rd Gen & Hyundai Elantra 6th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Kia Forte 3rd Gen & Hyundai Elantra 6th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Hyundai AD} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/kia-forte-3rd-gen-hyundai-elantra-6th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-ZAccuAir ENDO Air Ride Kit for Honda CR-Z https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-Z with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-Z. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda ZF1} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-z-accuair-endo-air-ride-kit.html$4,910.00 AccuAir ENDO Air Ride Kit for Honda Insight 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Insight 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Insight 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda ZE2} AccuAir ENDO Air Ride Kit USD 5170.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-insight-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Ridgeline 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Ridgeline 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Ridgeline 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YK2} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-ridgeline-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Ridgeline 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Ridgeline 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Ridgeline 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YK1} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-ridgeline-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Element https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Element with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Element. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YH} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-element-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Pilot FWD 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Pilot FWD 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Pilot FWD 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF5} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-fwd-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Pilot FWD 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Pilot FWD 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Pilot FWD 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF3} AccuAir ENDO Air Ride Kit USD 4770.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-fwd-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Pilot 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Pilot 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Pilot 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda YF1} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-pilot-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 5th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 5th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RW} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-5th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda HR-V AWD 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda HR-V AWD 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda HR-V AWD 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RU6} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-hr-v-awd-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda HR-V 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda HR-V 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda HR-V 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RU5} AccuAir ENDO Air Ride Kit USD 5260.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-hr-v-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 6th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 6th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 6th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RS} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-6th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 4th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 4th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RM} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-4th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Odyssey 5th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Odyssey 5th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Odyssey 5th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RL6} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-odyssey-5th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Odyssey 4th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Odyssey 4th Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Odyssey 4th Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RL5} AccuAir ENDO Air Ride Kit USD 4870.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-odyssey-4th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Odyssey 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Odyssey 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Odyssey 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RL3} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-odyssey-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Odyssey 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Odyssey 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Odyssey 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RL1} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-odyssey-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RE} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RD4} AccuAir ENDO Air Ride Kit USD 4630.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda CR-V 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda CR-V 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda CR-V 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda RD1} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-cr-v-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Fit/Jazz 3rd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Fit/Jazz 3rd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Fit/Jazz 3rd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda GK} AccuAir ENDO Air Ride Kit USD 4198.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-fit-jazz-3rd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Fit/Jazz 2nd Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Fit/Jazz 2nd Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Fit/Jazz 2nd Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda GE} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-fit-jazz-2nd-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Honda Fit/Jazz 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Honda Fit/Jazz 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Honda Fit/Jazz 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Honda GD} AccuAir ENDO Air Ride Kit USD 4910.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/honda-fit-jazz-1st-gen-accuair-endo-air-ride-kit.html

