AccuAir Control System Products

Shop By
AccuAir Control System Products Products Browse a collection of AccuAir Control System Products products en
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution X https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CZ4A} AccuAir ENDO Air Ride Kit USD 4535.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-x-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Lancer 9th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CY2A} AccuAir ENDO Air Ride Kit USD 4670.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-lancer-9th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Outlander 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CU2W} AccuAir ENDO Air Ride Kit USD 5210.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-outlander-1st-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution 7 8 9 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CT9A} AccuAir ENDO Air Ride Kit USD 4535.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-7-8-9-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Lancer 8th Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CS2A} AccuAir ENDO Air Ride Kit USD 4950.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-lancer-8th-gen-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution 5 6 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CP9A} AccuAir ENDO Air Ride Kit USD 5210.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-5-6-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution 4 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CN9A} AccuAir ENDO Air Ride Kit USD 5210.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-4-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution 2 3 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CE9A} AccuAir ENDO Air Ride Kit USD 5300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-2-3-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Evolution 1 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi CD9A} AccuAir ENDO Air Ride Kit USD 5300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-evolution-1-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Eclipse 4G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi 4G} AccuAir ENDO Air Ride Kit USD 5300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-eclipse-4g-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Eclipse 3G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi 3G} AccuAir ENDO Air Ride Kit USD 5300.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-eclipse-3g-accuair-endo-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Mitsubishi Eclipse & GSX 2G https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Mitsubishi 2G} AccuAir ENDO Air Ride Kit USD 4740.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/vc/accuair-control-system-products/mitsubishi-eclipse-gsx-2g-accuair-endo-air-ride-kit.html



