Chevrolet C10 2nd Gen Early Term (1967-1970) RWD ProductsBrowse a collection of compatible products for the Chevrolet C10 2nd Gen Early Term (1967-1970) RWDen
Air Suspension forChevrolet C10 2nd Gen Early Term RWD1967–1970
Shop air suspension parts built to fit your Chevrolet C10 2nd Gen Early Term (1967-1970), from complete air ride kits to individual parts like control arms and camber plates. Bag Riders also carries coilovers and conversion bags to help you bag your Chevrolet C10 on a budget.
Read more
Chevrolet's lineup spans decades of American car culture – from classic trucks and muscle cars to modern performance builds, and Bag Riders carries air suspension parts across that whole range. Whatever era your 2nd Gen Early Term C10 comes from, dropping it low adds the kind of presence that's been part of Chevy culture since the classics first hit the pavement, while airing back up keeps it drivable day to day. It's a setup that respects where the platform came from while giving you full control over how it sits now.
Want to bag your Chevrolet C10 but not sure where to start? Bag Riders has kits and management packages to fit your setup. Questions? Reach out and we'll get you on air ride fast.
Chevrolet C10 2nd Gen Early Term (1967-1970) RWD ProductsA collection of products compatible with the Chevrolet C10 2nd Gen Early Term (1967-1970) RWD
Bag Riders Manual Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpgThe Bag Riders Manual Air Ride Kit for the Chevy C10 GMC C1500 1st Gen is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup.
Bag Riders Manual Management Includes:
(4) Manual Paddle Valves with Mounting Plate
Aluminum Air Tank of your choice
FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
40A Relay(s) for your compressor(s)
Relay Wiring Kit(s)
Inflation Valve
110-145 PSI Pressure Switch
Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved 1/4' Air Line
(2) PTC Union Y Fittings
100% Free Technical Support - The Industry's Best!
{GM CK1} Bag Riders Manual Air Ride KitBag RidersUSD2420.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-2nd-gen-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpgThis Slam Specialties Analog Air Ride Kit for the Chevy C10 GMC C1500 1st Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup.{GM CK1} Slam Specialties Analog Air Ride KitSlam SpecialtiesUSD3245.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-2nd-gen-slam-specialties-analog-air-ride-kit.html
Bag Riders PRO Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpgThe Bag Riders PRO Control system for the Chevy C10 GMC C1500 1st Gen is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup.
Features:
Combined ECU and manifold
(3) User-definable pressure presets
Dedicated All-Down button
Rise-on-start and air out-on-shutdown functionality
Manual mode for individual and paired air spring control
Aluminum, digital controller with backlit screen
2-year limited warranty
Bag Riders PRO Management Includes:
Bag Riders PRO Control System
Combined ECU/Manifold
Bag Riders PRO Controller and Harness
Pre-assembled ECU/Manifold Main Harness
Compressor wiring harness with pre-wired relay
ECU/Manifold Mounting Hardware
In-line Fuse Holders (with fuses)
Wiring Terminals for hassle-free Installation
Manifold fitting pack
Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Bag Riders Water Trap
Air Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved Air Line
100% Free Technical Support - The Industry's Best!
Power Kit Options:
Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System
Bag Riders PRO Compressor Harness
{GM CK1} Bag Riders PRO Air Ride KitBag RidersUSD3410.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-2nd-gen-bag-riders-pro-air-ride-kit.html
AccuAir Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpgThe e-Level+ from AccuAir for the Chevy C10 GMC C1500 1st Gen is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market.
If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package.
Features:
3 programmable heights
Visual display of each sensor's height percentage
Automatic calibration
Air tank pressure readout on the e-Level Plus smartphone app
RGB backlighting that allows you to change the color of your ECU
Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems
Bluetooth 5.0
Control your air suspension with your smartphone using the e-Level Plus app
Compressor status indicator light
Over the air updates
Battery saver mode that sleeps the system after 24 hours
AccuAir e-Level+ Air Management Package Includes:
AccuAir e-Level+ System
e-Level+ ECU
(4) height sensors
e-Level+ TouchPad controller (optional)
ECU main harness
ECU valve harness
e-Level+ height sensor harness
Digital pressure sensor
Aluminum air tank of your choice
Compressor(s) of your choice
40amp Relay(s) for your compressor(s)
Relay wiring kit(s)
Inflation Valve
Air Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved Air Line**
100% FREE technical support - the industry's best!
**By choosing 1/4" air line you will receive (6) Plug-In Reducers
{GM CK1} AccuAir e-Level+ Air Ride KitAccuAirUSD3655.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-2nd-gen-accuair-e-level-plus-air-ride-kit.html
Maxload P2 Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpgThe Maxload P2 for the Chevy C10 GMC C1500 1st Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well.
If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package.
Features:
5 programmable pressure-based presets
Upgradable to HP2 for height-based presets
Rotary dial controller, with touchscreen & voice commands
Tank pressure readout with visual representation
Individual, 4-Corner control
Visual representation of each bag's travel
Automatic calibration
Rise-on-start functionality
Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving
Includes:
P2 Air Management system
P2 Manifold
P2 Rotary Controller
Main Wiring Harness
Compressor Wiring Harness
Mounting hardware
OPTIONAL HP2 Upgrade
(4) Height sensors & linkage
(4) Height sensor harnesses
HP2 Hub & wiring harness
Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Water Trap kit
Manifold fitting pack
(1) 60ft Bundle of DOT Approved Air Line
Air Line Cutter Tool
100% FREE technical support - the industry's best!{GM CK1} Maxload P2 Air Ride KitMAXLOADUSD3755.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevy-c10-gmc-c1500-1st-gen-maxload-p2-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Chevy C10 GMC C1500 1st Genhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpgLooking to bag your Chevy C10 GMC C1500 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems.
At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control.
The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Chevy C10 GMC C1500 1st Gen.
If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package.
AccuAir eLevel+ Features:
3 programmable heights, plus a dedicated all-down button
Visual display of each sensor's height percentage in the ePlus app
Automatic calibration
Control your air suspension with your smartphone using the ePlus app
Air tank pressure readout on the ePlus app
RGB backlighting that allows you to change the color of your ECU
Battery saver mode that sleeps the system after 24 hours
Bluetooth 5.0
Over the air updates
Compressor status indicator light via optional Touchpad+ Upgrade
Includes:
e+ Connect wireless controller
AccuAir e+ ECU
ECU wiring harness
Valve wiring pigtail
Digital pressure sensor
ePlus smartphone app
Mounting hardware
Height+ Upgrade
(4) Height sensors & linkage
Height sensor harness
TouchPad+ Upgrade (optional)
Touchpad+ physical controller
Touchpad harness
ENDO-VT valve tank in 3 or 5 gallon
Compressor(s) of your choice
40amp Relay(s) for your compressor(s)
Relay wiring kit(s)
Air Tank Drain/Emergency Fill Valve
(1) 60ft Bundle of DOT Approved Air Line**
Air Line Cutter Tool
100% FREE technical support - the industry's best!
**By choosing 1/4" air line you will receive (6) Plug-In Reducers
{GM CK1} AccuAir ENDO Air Ride KitAccuAirUSD4590.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevy-c10-gmc-c1500-1st-gen-accuair-endo-air-ride-kit.html
Ridetech CoolRide Rear Air Suspension (for OEM Coil Spring Models) for Chevy C10 GMC C1500 1963-1972https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_11334010.jpgThis is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride.BR14858RidetechUSD925.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-gen-c10-2nd-gen-ridetech-coolride-rear-kit-with-shocks.html
Ridetech ShockWave HQ Rear Air Suspension for 60-64 Ford & Chevy C10 C1500 63-87https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech-shockwave-hq-for-4-link_7.jpgRidetech's HQ ShockWave Air Suspension for the 60-64 Ford & Chevy C10 C1500 63-87 mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. These HQ ShockWaves use the same coilover-style, shock-within-a-spring construction as TQ, but in a more budget friendly single rebound-adjustable package.
Single Adjustable Rebound
The HQ Series ShockWaves feature a 24 position rebound adjustment knob on the shock body that allows you to dial your ride from daily driven comfort to a firmer, more controlled sport setting.
HQ Series vs TQ Series ShockWaves
These HQ Series ShockWaves from Ridetech use the same bags, and core hardware of the premium TQ Series. They still feature 1.834" pistons, 5/8" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. The main difference comes down to how much damping control you get. The HQ lacks the remote reservoir of the TQ which allows for high speed and low speed compression adjustment as well. These HQ ShockWaves for the 60-64 Ford & Chevy C10 C1500 63-87 are best for daily driving, weekend warriors and show cars while the more expensive TQ Series are best suited for heavy track use and for those seeking the most optimal handling characteristics.
Features of the HQ ShockWave Rear Kit
Completely redesigned internals
Aluminum impact forged construction, allowing for leak free operation
Single adjustable shock valving with 24 rebound clicks
Available in a wide range of stroke lengths and mounting styles to fit a large variety of applications
Monotube design for superior oil control
What's Included
(2) Rear Ridetech HQ ShockWaves for 60-64 Ford & Chevy C10 C1500 63-87
1/4" PTC air line fittings
Ridetech's 1,000,001 mile warranty
BR05886RidetechUSD945.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-hq-rear-kit-for-bolt-on-4-link.html
Ridetech ShockWave HQ Front Air Suspension for Chevy C10 GMC C1500 1963-1972https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_front_kit_cadillac_eldorado_g3_4.jpgRidetech's HQ ShockWave Air Suspension for the Chevy C10 GMC C1500 1963-1972 mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. These HQ ShockWaves use the same coilover-style, shock-within-a-spring construction as TQ, but in a more budget friendly single rebound-adjustable package.
Single Adjustable Rebound
The HQ Series ShockWaves feature a 24 position rebound adjustment knob on the shock body that allows you to dial your ride from daily driven comfort to a firmer, more controlled sport setting.
HQ Series vs TQ Series ShockWaves
These HQ Series ShockWaves from Ridetech use the same bags, and core hardware of the premium TQ Series. They still feature 1.834" pistons, 5/8" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. The main difference comes down to how much damping control you get. The HQ lacks the remote reservoir of the TQ which allows for high speed and low speed compression adjustment as well. These HQ ShockWaves for the Chevy C10 GMC C1500 1963-1972 are best for daily driving, weekend warriors and show cars while the more expensive TQ Series are best suited for heavy track use and for those seeking the most optimal handling characteristics.
Features of the HQ ShockWave Front Kit
Completely redesigned internals
Aluminum impact forged construction, allowing for leak free operation
Single adjustable shock valving with 24 rebound clicks
Available in a wide range of stroke lengths and mounting styles to fit a large variety of applications
Monotube design for superior oil control
What's Included
(2) Front Ridetech HQ ShockWaves for Chevy C10 GMC C1500 1963-1972
1/4" PTC air line fittings
Ridetech's 1,000,001 mile warranty
BR06454RidetechUSD945.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/gm-chevrolet-ck1-ck2-c10-1st-gen-ridetech-shockwave-tq-front-kit-for-strongarms-upper-control-arms.html
Ridetech CoolRide Front Air Suspension for Chevy C10 GMC C1500 1963-1972https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_w_shocks_11.jpgThis is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride.{GM CK1, GM CK2} RideTech CoolRide Front KitRidetechUSD995.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-2nd-gen-ridetech-coolride-front-kit.html
Ridetech ShockWave TQ Front Air Suspension for Chevy C10 GMC C1500 1963-1972https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_tq_front_kit_cadillac_eldorado_g3_3.jpgRidetech's TQ ShockWave Air Suspension for the Chevy C10 GMC C1500 1963-1972 mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. These TQ ShockWaves use the same coilover-style, shock-within-a-spring construction as HQ, but step up to a full triple-adjustable damping package with a remote reservoir.
Triple Adjustable DampingThe TQ Series ShockWaves feature independent 24 position adjustment for rebound, high-speed compression, and low-speed compression, giving you full control over how the shock reacts to sharp hits versus how it settles under steady load. Dial in a comfortable street setting or chase the last bit of handling performance for the track.
TQ Series vs HQ Series ShockWavesThese TQ Series ShockWaves from Ridetech share the same bags and core hardware as the HQ Series. They still feature 1.834" pistons, ⅝" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. The main difference comes down to how much damping control you get. The TQ adds a remote reservoir that unlocks high speed and low speed compression adjustment on top of rebound, something the single-adjustable HQ doesn't offer. These TQ ShockWaves for the Chevy C10 GMC C1500 1963-1972 are best suited for heavy track use and for those seeking the most optimal handling characteristics, while the more budget-friendly HQ Series covers daily driving, weekend warriors and show cars.
Features of the TQ ShockWave FrontSingle rebound adjustment PLUS dual stage high & low speed compressionAluminum impact forged shock construction for leak free operationTriple adjustable shock valving with external reservoirsRemote reservoir includes mounting brackets for easy installationAvailable in a wide range of stroke lengths and mounting styles to fit a large variety of applicationsMonotube design allows large piston for superior oil control, ride quality, and handling
What's Included(2) Front Ridetech TQ ShockWaves for Chevy C10 GMC C1500 1963-19721/4" PTC air line fittingsRidetech's 1,000,001 mile warranty BR06455RidetechUSD2105.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/gm-chevrolet-c10-1st-gen-ridetech-shockwave-tq-front-kit-for-strongarms-upper-control-arms.html
Ridetech ShockWave TQ Rear Air Suspension for 60-64 Ford & Chevy C10 C1500 63-87https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech-shockwave-tq-for-4-link_6.jpgRidetech's TQ ShockWave Air Suspension for the 60-64 Ford & Chevy C10 C1500 63-87 bolts in just like a rear coilover, swapping the coil-spring for an adjustable air spring and opening up a wide range of ride height and stance options. Like the front kit, these rear TQ ShockWaves share the same coilover-style, shock-within-a-spring construction as HQ, but step up to a full triple-adjustable damping package with a remote reservoir.
Triple Adjustable Damping
Each rear TQ shock gives you independent 24 position adjustment for rebound, high-speed compression, and low-speed compression, so you can control how the shock reacts to sharp hits separately from how it settles under steady load. Soften things up for a comfortable street ride or tighten everything down for serious track handling.
TQ Series vs HQ Series ShockWaves
These rear TQ Series ShockWaves share the same air springs and core hardware as the HQ Series, including 1.834" pistons, 5/8" hardened shafts, impact-forged anodized bodies, and Ridetech's 1,000,001 mile warranty. Where they part ways is damping control: TQ adds a remote reservoir that unlocks separate high speed and low speed compression tuning on top of rebound, something the single-adjustable HQ doesn't offer. For most daily drivers, weekend cruisers, and show cars, the rear HQ setup covers what you need. If you're chasing serious track performance or want to fine-tune handling balance front to rear, the rear TQ Series is the better fit.
Features of the TQ ShockWave Rear Kit
Single rebound adjustment PLUS dual stage high & low speed compression
Aluminum impact forged shock construction for leak free operation
Triple adjustable shock valving with external reservoirs
Remote reservoir includes mounting brackets for easy installation
Available in a wide range of stroke lengths and mounting styles to fit a large variety of applications
Monotube design allows large piston for superior oil control, ride quality, and handling
What's Included
(2) Rear Ridetech TQ ShockWaves for 60-64 Ford & Chevy C10 C1500 63-87
1/4" PTC air line fittings
Ridetech's 1,000,001 mile warranty
BR05887RidetechUSD2105.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-tq-rear-kit-for-bolt-on-4-link.html
RideTech CoolRide HQ Front Shockshttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_hq_rear_shocks_14.jpgRideTech's HQ (handling quality) Series shocks add rebound adjustment for the driver who wants to tune ride quality AND handling quality to their specific taste. A wide rebound adjustment range allows you to cruise down the road in plush comfort or firm up your suspension for those Saturday morning canyon roads!
Features
Mono-tube design allows large piston for superior oil control - increases ride quality and handling performance
1/2” hardened shaft is precision ground and straightened to a tolerance of .001” inch for increased durability and performance
Billet end cap with integrated debris wiper to prevent seal damage
Teflon piston wiper allows consistent piston/bore contact and repeatable performance
Oversized rod guide improves piston rod stability
Integral internal bumpstop eliminates extension crashing
Mono-tube bore is cathode anodized for years of wear resistance
Hard coat external anodizing ensures years of lasting beauty and performance
Specially contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation
Mono-tube design not only optimizes performance, but uses fewer components than a twin tube design. This is superior fluid control in its most simple and efficient form!
{GM CK1, GM CK2} RideTech CoolRide HQ Front ShocksRidetechUSDhttps://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-gen-c10-2nd-gen-ridetech-coolride-front-shocks.html
RideTech Front Spindle Pairhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1.jpgThe RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle.
RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms.
BR06453RidetechUSD450.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-gen-2nd-gen-ridetech-front-spindle-pair.html
RideTech StrongArms Front Upper Control Arms (For Coolride Kit)https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_1.jpgWhat says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.
RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
BR06452RidetechUSD615.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-gen-2nd-gen-ridetech-strongarms-front-upper-control-arms-for-coolride-kit.html
RideTech StrongArms Front Lower Control Arms (For Coolride Kit)https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_strongarms_front_lower_control_arms_chevrolet_impala_2_2.jpgWhat says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.
RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
BR06451RidetechUSD995.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-ck1-c10-ridetech-strongarms-front-lower-control-arms-for-coolride-kit.html
RideTech Bolt-On 4-Link Rear Kithttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_chevrolet_c10.jpgRideTech Bolt-On 4-Link Rear Kit
The RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.
The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology.
The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly.
RideTech Shockwave
RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.BR06460RidetechUSD2550.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-ck1-c10-c1000-c1500-ridetech-bolt-on-4-link-rear-kit-adjustable-heim-joints.html
RideTech Front Spindle Pairhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1.jpgThe RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle.
RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms.
BR06453RidetechUSD450.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-1st-gen-2nd-gen-ridetech-front-spindle-pair.html
RideTech Bolt-On 4-Link Rear Kithttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_chevrolet_c10.jpgRideTech Bolt-On 4-Link Rear Kit
The RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.
The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology.
The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly.
RideTech Shockwave
RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.BR06460RidetechUSD2550.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-ck1-c10-c1000-c1500-ridetech-bolt-on-4-link-rear-kit-adjustable-heim-joints.html
Honestly the best customer service from any company I purchased from. I will recommend Bag Riders to anyone I know that mods vehicles.
“
“
If you're thinking about getting an air ride setup for your vehicle, look no further. Bag Riders will get you setup with everything you need, and then some.
“
“
The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders! The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders!
“
“
Not only are the quality of Bag Rider’s products incredible, but their customer service is second to none. I have never had such a positive, helpful experience!
Slam Specialties Analog Air Ride Kit for Chevy C10 GMC C1500 1st GenSlam Specialties Analog Air Ride Kit for Chevy C10 GMC C1500 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Chevy C10 GMC C1500 1st Gen is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {GM CK1} Slam Specialties Analog Air Ride Kit Slam Specialties USD 3245.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-c10-1st-2nd-gen-slam-specialties-analog-air-ride-kit.htmlSale Price $3,245.00
Maxload P2 Air Ride Kit for Chevy C10 GMC C1500 1st GenMaxload P2 Air Ride Kit for Chevy C10 GMC C1500 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Chevy C10 GMC C1500 1st Gen is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Main Wiring Harness Compressor Wiring Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {GM CK1} Maxload P2 Air Ride Kit MAXLOAD USD 3755.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevy-c10-gmc-c1500-1st-gen-maxload-p2-air-ride-kit.htmlSale Price $3,755.00
AccuAir ENDO Air Ride Kit for Chevy C10 GMC C1500 1st GenAccuAir ENDO Air Ride Kit for Chevy C10 GMC C1500 1st Gen https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Chevy C10 GMC C1500 1st Gen with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Chevy C10 GMC C1500 1st Gen. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {GM CK1} AccuAir ENDO Air Ride Kit AccuAir USD 4590.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevy-c10-gmc-c1500-1st-gen-accuair-endo-air-ride-kit.htmlSale Price $4,590.00
Ridetech CoolRide Rear Air Suspension (for OEM Coil Spring Models) for Chevy C10 GMC C1500 1963-1972Ridetech CoolRide Rear Air Suspension (for OEM Coil Spring Models) for Chevy C10 GMC C1500 1963-1972 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_coolride_11334010.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. BR14858 Ridetech USD 925.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-c10-1st-gen-c10-2nd-gen-ridetech-coolride-rear-kit-with-shocks.html$925.00
RideTech Front Spindle PairRideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1.jpg The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle. RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms. BR06453 Ridetech USD 450.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-c10-1st-gen-2nd-gen-ridetech-front-spindle-pair.html$450.00
RideTech Bolt-On 4-Link Rear KitRideTech Bolt-On 4-Link Rear Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_chevrolet_c10.jpg RideTech Bolt-On 4-Link Rear Kit The RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving. The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology. The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly. RideTech Shockwave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system. BR06460 Ridetech USD 2550.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-ck1-c10-c1000-c1500-ridetech-bolt-on-4-link-rear-kit-adjustable-heim-joints.html$2,550.00
