
Air Suspension for Ferrari 360 Type F131 RWD 1999–2005
Shop air suspension parts built to fit your Ferrari 360 Type F131 (1999-2005), from complete air ride kits to individual parts like control arms and camber plates. Bag Riders also carries coilovers and conversion bags to help you bag your Ferrari 360 on a budget.
Read more
Ferrari built its name on the racetrack, and that pedigree shows up in every Type F131 360 – razor-sharp handling, a car that feels like it's barely tolerating street speeds. Air suspension gives that pedigree more range instead of taking away from it. You keep the precise, track-bred handling Ferrari engineered in, while gaining the ability to clear driveways and speed bumps that would otherwise scrape a factory-height exotic, and drop it low for a stance that matches the car's presence when it's parked. It's practical control for a car that was never built with practicality in mind.
Want to bag your Ferrari 360 but not sure where to start? Bag Riders has kits and management packages to fit your setup. Questions? Reach out and we'll get you on air ride fast.
- Air Ride Kits
Bag Riders Manual Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the Ferrari 360 is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Ferrari F360} Bag Riders Manual Air Ride Kit Bag Riders USD 3231.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Ferrari 360Slam Specialties Analog Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Ferrari 360 is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Ferrari F360} Slam Specialties Analog Air Ride Kit Slam Specialties USD 3973.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-slam-specialties-analog-air-ride-kit.htmlSale Price $3,973.50 Bag Riders PRO Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the Ferrari 360 is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Ferrari F360} Bag Riders PRO Air Ride Kit Bag Riders USD 4122.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-bag-riders-pro-air-ride-kit.html
Bag Riders PRO Pre-Configured Air Ride Kit - Ferrari 360 & F430Bag Riders PRO Pre-Configured Air Ride Kit - Ferrari 360 & F430 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_90.jpg This pre-configured Bag Riders PRO air ride kit for the Ferrari 360 & F430 is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. We have paired this with our Super Low Air Suspension for the ultimate package, allowing you to drive low, and park even lower. Includes: Bag Riders Super Low Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty BR27147 Bag Riders USD 4333.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/bag-riders-pro-pre-configured-air-ride-kit-ferrari-360-f430.htmlSale Price $4,333.50 AccuAir Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the Ferrari 360 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ferrari F360} AccuAir e-Level+ Air Ride Kit AccuAir USD 4342.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-accuair-e-level-plus-air-ride-kit.html
Maxload P2 Air Ride Kit for Ferrari 360Maxload P2 Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Ferrari 360 is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Main Wiring Harness Compressor Wiring Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Ferrari F360} Maxload P2 Air Ride Kit MAXLOAD USD 4432.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-maxload-p2-air-ride-kit.htmlSale Price $4,432.50
AccuAir ENDO Air Ride Kit for Ferrari 360AccuAir ENDO Air Ride Kit for Ferrari 360 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Ferrari 360 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ferrari 360. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ferrari F360} AccuAir ENDO Air Ride Kit AccuAir USD 5256.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-accuair-endo-air-ride-kit.htmlSale Price $5,256.00
- Air Suspension
Bag Riders Super Low Rear Air Suspension for Ferrari 360 & F430 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/e/ferrari-f430-super-low-kit-rear.jpg The Super Low rear air suspension for the Ferrari 360 & F430 is manufactured by Bag Riders with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 36-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with 53% thicker rubber than typical bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low by Bag Riders: Built to Drive Low Kit Includes: (2) Super Low rear shocks with 1/8" port single bellow air springs (2) Black, anodized aluminum, braided leader lines 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% free technical support, from the industry's best BR26924 Bag Riders USD 1395.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-f430-super-low-rear-suspension.html
Bag Riders Super Low Front Air Suspension for Ferrari 360 & F430 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/e/ferrari-f430-super-low-kit-front.jpg The Super Low front air suspension for the Ferrari 360 & F430 is manufactured by Bag Riders with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 36-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with 53% thicker rubber than typical bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low by Bag Riders: Built to Drive Low Kit Includes: (2) Super Low front shocks with 1/8" port single bellow air springs (2) Black, anodized aluminum, braided leader lines 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% free technical support, from the industry's best BR26923 Bag Riders USD 1395.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-f430-super-low-front-suspension.html
Bag Riders Super Low Air Suspension for Ferrari 360 & F430Bag Riders Super Low Air Suspension for Ferrari 360 & F430 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/f/e/ferrari-f430-super-low-kit-front-and-rear.jpg This four-corner Bag Riders Super Low air suspension for the Ferrari 360 & F430 is manufactured with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 32-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with 53% thicker rubber than typical bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low Suspension Kit Includes: (2) Super Low front shocks with 1/8" port single bellow air springs (2) Super Low rear shocks with 1/8" port single bellow air springs (4) Black, anodized aluminum, braided leader lines 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% Free Technical Support - The Industry's Best! BR26933 Bag Riders USD 2511.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-f430-bag-riders-super-low-air-suspension.htmlSale Price $2,511.00
Universal Air Solution Series Suspension KitUniversal Air Solution Series Suspension Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__1_1_1_1.jpg The Solution Series from Universal Air is a vehicle specific complete air spring and strut package that increases comfort, boosts performance, and fits perfectly. Universal Air's Solution Series solves the issue of aftermarket suspensions being too fat or too tall for an application. Progressive sleeve style bags provide you with the ultimate travel range, ride quality, and clearance. Features: Progressive sleeve style air springs specifically designed for narrow suspension clearances Proprietary threaded dampers - stiff enough to maintain high performance levels, and relaxed enough to provide an enjoyable ride Completely bolt in - easy install without any advanced modification to your vehicle Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for added comfort. Sealed rotary thrust bearings, designed to keep dirt and moisture out of the assembly 6061-T6 aluminum and hard anodized bag end caps for ultimate durability Includes: Universal Air Solution Series front suspension Universal Air Solution Series rear suspension Spanner tool Fittings BR09192 Universal Air USD 2713.46 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-universal-air-solution-series-suspension-kit.htmlSale Price $2,713.46
D2 Racing Air Ride Suspension KitD2 Racing Air Ride Suspension Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_wishbone-sleeve_and_strut-sleeve_9.jpg This suspension kit from D2 Racing features fully threaded, 36-way damping adjustable strut bodies to dial in the perfect height and ride quality of your vehicle. Kit Includes: D2 Racing front suspension D2 Racing rear suspension (4) 1/4” tube - 1/8” BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs BR13621 D2 Racing USD 2754.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ferrari-360-rwd-d2-racing-air-ride-suspension-kit.htmlSale Price $2,754.00


