Shop air suspension parts built to fit your Ford Galaxie 2nd Gen (1960-1964), from complete air ride kits to individual parts like control arms and camber plates. Bag Riders also carries coilovers and conversion bags to help you bag your Ford Galaxie on a budget.
Ford Galaxie 2nd Gen (1960-1964) RWD ProductsA collection of products compatible with the Ford Galaxie 2nd Gen (1960-1964) RWD
Bag Riders Manual Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpgThe Bag Riders Manual Air Ride Kit for the Ford Galaxie 1960-1964 is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup.
Bag Riders Manual Management Includes:
(4) Manual Paddle Valves with Mounting Plate
Aluminum Air Tank of your choice
FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
40A Relay(s) for your compressor(s)
Relay Wiring Kit(s)
Inflation Valve
110-145 PSI Pressure Switch
Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved 1/4' Air Line
(2) PTC Union Y Fittings
100% Free Technical Support - The Industry's Best!
{Ford Galaxie 2} Bag Riders Manual Air Ride KitBag RidersUSD4258.50https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-bag-riders-manual-air-ride-kit.html
Slam Specialties Analog Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpgThis Slam Specialties Analog Air Ride Kit for the Ford Galaxie 1960-1964 is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup.{Ford Galaxie 2} Slam Specialties Analog Air Ride KitSlam SpecialtiesUSD5001.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-slam-specialties-analog-air-ride-kit.html
Bag Riders PRO Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpgThe Bag Riders PRO Control system for the Ford Galaxie 1960-1964 is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup.
Features:
Combined ECU and manifold
(3) User-definable pressure presets
Dedicated All-Down button
Rise-on-start and air out-on-shutdown functionality
Manual mode for individual and paired air spring control
Aluminum, digital controller with backlit screen
2-year limited warranty
Bag Riders PRO Management Includes:
Bag Riders PRO Control System
Combined ECU/Manifold
Bag Riders PRO Controller and Harness
Pre-assembled ECU/Manifold Main Harness
Compressor wiring harness with pre-wired relay
ECU/Manifold Mounting Hardware
In-line Fuse Holders (with fuses)
Wiring Terminals for hassle-free Installation
Manifold fitting pack
Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Bag Riders Water Trap
Air Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved Air Line
100% Free Technical Support - The Industry's Best!
Power Kit Options:
Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System
Bag Riders PRO Compressor Harness
{Ford Galaxie 2} Bag Riders PRO Air Ride KitBag RidersUSD5149.50https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-bag-riders-pro-air-ride-kit.html
AccuAir Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpgThe e-Level+ from AccuAir for the Ford Galaxie 1960-1964 is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market.
If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package.
Features:
3 programmable heights
Visual display of each sensor's height percentage
Automatic calibration
Air tank pressure readout on the e-Level Plus smartphone app
RGB backlighting that allows you to change the color of your ECU
Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems
Bluetooth 5.0
Control your air suspension with your smartphone using the e-Level Plus app
Compressor status indicator light
Over the air updates
Battery saver mode that sleeps the system after 24 hours
AccuAir e-Level+ Air Management Package Includes:
AccuAir e-Level+ System
e-Level+ ECU
(4) height sensors
e-Level+ TouchPad controller (optional)
ECU main harness
ECU valve harness
e-Level+ height sensor harness
Digital pressure sensor
Aluminum air tank of your choice
Compressor(s) of your choice
40amp Relay(s) for your compressor(s)
Relay wiring kit(s)
Inflation Valve
Air Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved Air Line**
100% FREE technical support - the industry's best!
**By choosing 1/4" air line you will receive (6) Plug-In Reducers
{Ford Galaxie 2} AccuAir e-Level+ Air Ride KitAccuAirUSD5370.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-accuair-e-level-plus-air-ride-kit.html
Maxload P2 Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpgThe Maxload P2 for the Ford Galaxie 1960-1964 is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well.
If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package.
Features:
5 programmable pressure-based presets
Upgradable to HP2 for height-based presets
Rotary dial controller, with touchscreen & voice commands
Tank pressure readout with visual representation
Individual, 4-Corner control
Visual representation of each bag's travel
Automatic calibration
Rise-on-start functionality
Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving
Includes:
P2 Air Management system
P2 Manifold
P2 Rotary Controller
Main Wiring Harness
Compressor Wiring Harness
Mounting hardware
OPTIONAL HP2 Upgrade
(4) Height sensors & linkage
(4) Height sensor harnesses
HP2 Hub & wiring harness
Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Water Trap kit
Manifold fitting pack
(1) 60ft Bundle of DOT Approved Air Line
Air Line Cutter Tool
100% FREE technical support - the industry's best!{Ford Galaxie 2} Maxload P2 Air Ride KitMAXLOADUSD5460.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-1960-1964-maxload-p2-air-ride-kit.html
AccuAir ENDO Air Ride Kit for Ford Galaxie 1960-1964https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpgLooking to bag your Ford Galaxie 1960-1964 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems.
At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control.
The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ford Galaxie 1960-1964.
If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package.
AccuAir eLevel+ Features:
3 programmable heights, plus a dedicated all-down button
Visual display of each sensor's height percentage in the ePlus app
Automatic calibration
Control your air suspension with your smartphone using the ePlus app
Air tank pressure readout on the ePlus app
RGB backlighting that allows you to change the color of your ECU
Battery saver mode that sleeps the system after 24 hours
Bluetooth 5.0
Over the air updates
Compressor status indicator light via optional Touchpad+ Upgrade
Includes:
e+ Connect wireless controller
AccuAir e+ ECU
ECU wiring harness
Valve wiring pigtail
Digital pressure sensor
ePlus smartphone app
Mounting hardware
Height+ Upgrade
(4) Height sensors & linkage
Height sensor harness
TouchPad+ Upgrade (optional)
Touchpad+ physical controller
Touchpad harness
ENDO-VT valve tank in 3 or 5 gallon
Compressor(s) of your choice
40amp Relay(s) for your compressor(s)
Relay wiring kit(s)
Air Tank Drain/Emergency Fill Valve
(1) 60ft Bundle of DOT Approved Air Line**
Air Line Cutter Tool
100% FREE technical support - the industry's best!
**By choosing 1/4" air line you will receive (6) Plug-In Reducers
{Ford Galaxie 2} AccuAir ENDO Air Ride KitAccuAirUSD6283.50https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-1960-1964-accuair-endo-air-ride-kit.html
RideTech ShockWave HQ Rear Kit (For Bolt-On 4-Link)https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_rear_dodge_charger_2nd_gen_4.jpgRideTech ShockWave
RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.
Handling Quality Series
The Handling Quality ("HQ") series features single adjustable shock valving. It is housed in an impact forged monotube aluminum construction. The HQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications.
Features:
Completely redesigned internal design
Aluminum impact forged construction allows leak free operation
Single adjustable shock valving
Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications
Monotube design for superior oil control
Easy & precise valve adjustment with 26 rebound clicks
BR05886RidetechUSD850.50https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-hq-rear-kit-for-bolt-on-4-link.html
RideTech ShockWave HQ Front Kithttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_front_kit_mercury_cougar_ford_mustang_1.jpgRideTech ShockWave
RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.
Handling Quality Series
The Handling Quality ("HQ") series features single adjustable shock valving. It is housed in an impact forged monotube aluminum construction. The HQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications.
Features:
Completely redesigned internal design
Aluminum impact forged construction allows leak free operation
Single adjustable shock valving
Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications
Monotube design for superior oil control
Easy & precise valve adjustment with 26 rebound clicks
BR05877RidetechUSD873.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-ridetech-shockwave-hq-front-kit.html
RideTech ShockWave TQ Rear Kit (For Bolt-On 4-Link)https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_tq_rear_dodge_charger_2nd_gen_1_3.jpgRideTech ShockWave
RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.
Track Quality Series
The Track Quality ("TQ") series features triple adjustable shock valving that sets rebound, high-speed compression, and low-speed compression independently. The high-speed adjustment allows tuning for impact harshness... potholes, speedbumps, offroad use and other harsh road irregularities that might induce a high-speed excursion of the piston rod. The low-speed adjustment allows tuning of ride quality, as well as the general cornering characteristics of typical road course and racetrack use. All of this technology is housed in an impact forged aluminum construction. The TQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications.
Features:
Single rebound adjustment PLUS dual stage high & low speed compression
Aluminum impact forged shock construction for leak free operation
Monotube design allows large piston for superior oil control, ride quality, and handling
Available in a wide range of stroke lengths and mounting styles to fit large variety of applications
Remote reservoir includes mounting brackets for easy installation
BR05887RidetechUSD1894.50https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-tq-rear-kit-for-bolt-on-4-link.html
RideTech HQ Series Complete Coilover Suspension Systemhttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/untitled-1_2.jpgCoilover System for 1960-1964 full-size Ford and 1961-1964 full-size Mercury (Galaxie, Monterey, Sunliner & Montclair, etc)
HQ Series CoilOvers utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.
The Bolt On 4-Link greatly improves traction, handling and ride quality. Installation does not require the any major modifications to the floor pan and requires only minimal welding to the axle tube. The R-Joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!
BR17800RidetechUSD3565.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-1960-1964-ridetech-hq-series-complete-coilover-suspension-system.html
RideTech Bolt-On 4-Link Rear Kithttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_ford_galaxie_2nd_gen.jpgThe RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.
The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology.
The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly. {Ford Galaxie 2} RideTech Bolt-On 4-Link Rear KitRidetechUSD1815.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-ridetech-bolt-on-4-link-rear-kit.html
RideTech Bolt-On 4-Link Rear Kithttps://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_ford_galaxie_2nd_gen.jpgThe RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.
The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology.
The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly. {Ford Galaxie 2} RideTech Bolt-On 4-Link Rear KitRidetechUSD1815.00https://schema.org/NewConditionhttps://schema.org/InStockhttps://www.bagriders.com/ford-galaxie-2nd-gen-ridetech-bolt-on-4-link-rear-kit.html
Ford's lineup spans just about every corner of car culture – from classic muscle and trucks to modern performance builds, and there's a stance scene built around nearly all of it. Air suspension gives you the same control no matter which platform you're working with: drop your Ford Galaxie low for a stance that fits right into Ford's long-running enthusiast culture, and air back up whenever daily driving or ground clearance takes priority. It's a way to make a platform with decades of history feel completely your own.
Want to bag your Ford Galaxie but not sure where to start? Bag Riders has kits and management packages to fit your setup. Questions? Reach out and we'll get you on air ride fast.
Honestly the best customer service from any company I purchased from. I will recommend Bag Riders to anyone I know that mods vehicles.
“
“
If you're thinking about getting an air ride setup for your vehicle, look no further. Bag Riders will get you setup with everything you need, and then some.
“
“
The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders! The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders!
“
“
Not only are the quality of Bag Rider’s products incredible, but their customer service is second to none. I have never had such a positive, helpful experience!
Slam Specialties Analog Air Ride Kit for Ford Galaxie 1960-1964Slam Specialties Analog Air Ride Kit for Ford Galaxie 1960-1964 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the Ford Galaxie 1960-1964 is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Ford Galaxie 2} Slam Specialties Analog Air Ride Kit Slam Specialties USD 5001.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-galaxie-2nd-gen-slam-specialties-analog-air-ride-kit.htmlSale Price $5,001.00
Maxload P2 Air Ride Kit for Ford Galaxie 1960-1964Maxload P2 Air Ride Kit for Ford Galaxie 1960-1964 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3013/maxload-p2-complete-air-ride-kit.jpg The Maxload P2 for the Ford Galaxie 1960-1964 is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well. If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package. Features: 5 programmable pressure-based presets Upgradable to HP2 for height-based presets Rotary dial controller, with touchscreen & voice commands Tank pressure readout with visual representation Individual, 4-Corner control Visual representation of each bag's travel Automatic calibration Rise-on-start functionality Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving Includes: P2 Air Management system P2 Manifold P2 Rotary Controller Main Wiring Harness Compressor Wiring Harness Mounting hardware OPTIONAL HP2 Upgrade (4) Height sensors & linkage (4) Height sensor harnesses HP2 Hub & wiring harness Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Water Trap kit Manifold fitting pack (1) 60ft Bundle of DOT Approved Air Line Air Line Cutter Tool 100% FREE technical support - the industry's best! {Ford Galaxie 2} Maxload P2 Air Ride Kit MAXLOAD USD 5460.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-galaxie-1960-1964-maxload-p2-air-ride-kit.htmlSale Price $5,460.00
AccuAir ENDO Air Ride Kit for Ford Galaxie 1960-1964AccuAir ENDO Air Ride Kit for Ford Galaxie 1960-1964 https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg Looking to bag your Ford Galaxie 1960-1964 with one of the most advanced and cleanest setups on the market? The AccuAir ENDO Air Ride Kit combines the cutting-edge technology of e-Level+ management with the ultra-sleek ENDO-T or ENDO-VT air tank systems. At the heart of this kit is the e+ Connect ECU, an intelligent height-based management system. With the included height sensors, you get three programmable presets plus a dedicated "all-down" button to instantly air out when parked. Control your ride directly from your smartphone via the free ePlus app, or upgrade to the physical TouchPad+ for tactile, at-your-fingertips control. The real star of the show is the ENDO-VT tank. By housing the system's valves directly inside the tank endcaps, it completely eliminates the need for a standalone manifold (like a VU4). This drastically cuts down on plumbing and wiring, resulting in an incredibly clean trunk setup that matches the premium aesthetic of your Ford Galaxie 1960-1964. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. AccuAir eLevel+ Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Ford Galaxie 2} AccuAir ENDO Air Ride Kit AccuAir USD 6283.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-galaxie-1960-1964-accuair-endo-air-ride-kit.htmlSale Price $6,283.50
RideTech ShockWave HQ Rear Kit (For Bolt-On 4-Link)RideTech ShockWave HQ Rear Kit (For Bolt-On 4-Link) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_rear_dodge_charger_2nd_gen_4.jpg RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system. Handling Quality Series The Handling Quality ("HQ") series features single adjustable shock valving. It is housed in an impact forged monotube aluminum construction. The HQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications. Features: Completely redesigned internal design Aluminum impact forged construction allows leak free operation Single adjustable shock valving Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications Monotube design for superior oil control Easy & precise valve adjustment with 26 rebound clicks BR05886 Ridetech USD 850.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-hq-rear-kit-for-bolt-on-4-link.htmlSale Price $850.50
RideTech ShockWave HQ Front KitRideTech ShockWave HQ Front Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_hq_front_kit_mercury_cougar_ford_mustang_1.jpg RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system. Handling Quality Series The Handling Quality ("HQ") series features single adjustable shock valving. It is housed in an impact forged monotube aluminum construction. The HQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications. Features: Completely redesigned internal design Aluminum impact forged construction allows leak free operation Single adjustable shock valving Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications Monotube design for superior oil control Easy & precise valve adjustment with 26 rebound clicks BR05877 Ridetech USD 873.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-galaxie-2nd-gen-ridetech-shockwave-hq-front-kit.htmlSale Price $873.00
RideTech ShockWave TQ Rear Kit (For Bolt-On 4-Link)RideTech ShockWave TQ Rear Kit (For Bolt-On 4-Link) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_shockwave_tq_rear_dodge_charger_2nd_gen_1_3.jpg RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system. Track Quality Series The Track Quality ("TQ") series features triple adjustable shock valving that sets rebound, high-speed compression, and low-speed compression independently. The high-speed adjustment allows tuning for impact harshness... potholes, speedbumps, offroad use and other harsh road irregularities that might induce a high-speed excursion of the piston rod. The low-speed adjustment allows tuning of ride quality, as well as the general cornering characteristics of typical road course and racetrack use. All of this technology is housed in an impact forged aluminum construction. The TQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications. Features: Single rebound adjustment PLUS dual stage high & low speed compression Aluminum impact forged shock construction for leak free operation Monotube design allows large piston for superior oil control, ride quality, and handling Available in a wide range of stroke lengths and mounting styles to fit large variety of applications Remote reservoir includes mounting brackets for easy installation BR05887 Ridetech USD 1894.50 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-c10-gmc-c1000-c1500-ford-galaxie-ridetech-shockwave-tq-rear-kit-for-bolt-on-4-link.htmlSale Price $1,894.50
RideTech Bolt-On 4-Link Rear KitRideTech Bolt-On 4-Link Rear Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/r/i/ridetech_4_link_ford_galaxie_2nd_gen.jpg The RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2”. The ride quality is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving. The area of largest improvement is the handling and cornering performance. RideTech's system eliminates the OEM leaf springs and replaces them with a 4-link rear suspension. The 4-link bars offer more precise positioning of the rear axle to eliminate flexing and increase stability through the corners. When combined with a ShockWave or a RideTech coilover front suspension kit your classic muscle car can now enjoy the benefits of modern handling and ride quality technology. The RideTech Bolt-On 4-Link is designed to fit a variety of RideTech shock and spring solutions. Add RideTech's ShockWave air springs to be able to change your vehicle's ride height and spring rate on the fly. {Ford Galaxie 2} RideTech Bolt-On 4-Link Rear Kit Ridetech USD 1815.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-galaxie-2nd-gen-ridetech-bolt-on-4-link-rear-kit.html$1,815.00