
Air Suspension for Ford Mustang S550 RWD w/ Mag 2015–2023
Here you'll find a full range of air suspension parts that are specifically designed to fit your Ford Mustang S550 (2015-2023). From all-in-one complete air ride kits that have everything you need to bag your Ford Mustang, to individual parts and pieces like control arms and camber plates. Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to bag your Ford Mustang S550 (2015-2023) on a budget.
Read more
Air Ride Suspension for your Ford Mustang S550 (2015-2023)
The Ford Mustang S550 takes the legendary muscle car of the past and brings it up to speed for what modern drivers are looking for. The S550 Mustang is one of those platforms that is just guaranteed to break necks when you install air suspension. With air suspension, your Mustang will feel much more responsive and sporty to drive compared to on stock suspension. You also get all of the fun of owning a lowered car without the added stress since you can change your Mustang’s ride height at the push of a button. No need to frame bang or rip your front lip off on those long trips to shows.
Interested in bagging your S550 Mustang but unsure where to start? Bag Riders is here to help! We have tons of air ride kits and management packages for you to choose from to ensure that you will have a suspension set up that fits your needs. If you have any questions about bagging your Ford Mustang S550, hit us up and we can assist you in getting your car on air ride as quickly as possible.
- Coilovers
BC Racing BR Series Coilovers for Ford Shelby GT S550 (with Magneride) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc_racing_coilovers_04_36_1_2_1_1_1_1_1_1_1_1_1_1_2_2.jpg BC Racing BR Series Coilovers for the Ford Shelby GT S550 (with Magneride) are the best-selling entry point into fully adjustable coilover suspension. BC Racing is known to deliver real handling performance without sacrificing ride comfort or daily drivability. This setup is developed and tested specifically for the Ford Shelby GT S550 (with Magneride), built around a mono-tube damper with 30-way damping adjustment and ride height adjustable independent of spring preload. Features Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Ford Shelby GT S550 (with Magneride) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR17716 BC Racing USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-mustang-6th-gen-bc-racing-br-type-coilover-kit-magneride.html
BC Racing BR Series Coilovers (Extreme Low) for Ford Shelby GT S550 (with Magneride) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc_racing_coilovers_04_36_1_2_1_1_1_1_1_1_1_1_1_1_2_2_1.jpg BC Racing BR Series Extreme Low Coilovers for the Ford Shelby GT S550 (with Magneride) are built for an aggressive, show-ready drop beyond what a standard coilover kit delivers - using a shock and spring package roughly 20mm shorter for about 1" of additional drop on most applications. The shortened shock length preserves usable damper travel at a lower stance, and the kit keeps the same 30-way adjustable mono-tube damper and independent ride-height adjustment as the rest of the BR Series lineup. Features Extreme Low shock and spring package - approximately 20mm shorter for a lower installed height Mono-tube shock design Linear piston and damping curve Height adjustment via shock body (independent of spring preload) Front camber plates standard on applicable kits Rear camber plates available where applicable 30 way damping adjustment Custom spring rates and Swift springs available 1 year warranty against manufacturer defects Fully rebuildable What Makes These Coilovers "Extreme Low" BC Racing Extreme Low coilovers use a shock and spring combination roughly 20mm shorter than a standard coilover setup, which translates to approximately 1 inch of additional drop over a standard kit on most applications. Since the damper itself is physically shorter, you get a lower ride height while still retaining usable suspension travel - instead of running a standard kit with the springs drooped low and the shock riding near fully compressed. Spring rates on Extreme Low kits may be stiffer than the standard equivalent depending on the platform, which can sharpen handling response but may also make bumps a bit harsher. Converting BC Racing Coilovers to Air Suspension BR Series coilovers on the Ford Shelby GT S550 (with Magneride) aren't locked into a coil spring setup for life. Because they feature fully-threaded shock bodies, these coilovers convert to a full air suspension setup by simply removing the coil springs and threading on a set of coilover conversion bags in their place. Want to start out with coils and move to air suspension in the future? This makes the BR Series a practical starting point for owners who want coilover-level adjustability now but may want to move to air suspension down the road, or who want to keep that option open without committing to a full air ride kit up front. VERA Double Bellow Bag for BC Racing Coilovers VERA Sleeve Bag for BC Racing Coilovers Maxload Coilover Conversion Double Bellow Bag Maxload Coilover Conversion Slim Double Bellow Bag Spring Rate Upgrades The standard springs on BC Racing coilovers work well for most builds, but if you're chasing a specific stance or feel, the BR Series can be upgraded to a custom spring rate at checkout: Custom Spring Rates for BC Racing Coilovers (4 Corner) - spec your own spring rates up to 20k, installed on your coilovers in place of the standard springs by BC Racing before shipping. Swift Springs Upgrade for Coilovers (4 Corner)Swift Springs Upgrade for Coilovers (4 Corner) - for spring rates above 20k, or for Swift's faster reacting spring material, installed in place of the standard springs. Both options replace the standard springs entirely - you won't receive the stock springs alongside a custom spring rate order. To order simply add either one of the above products to your car with this set of coilovers or reach out and we can help you with placing the order. *Actual product not displayed BR17718 BC Racing USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-mustang-6th-gen-bc-racing-br-type-coilover-kit-magneride-extreme-low.html
- Air Suspension Parts
KW Suspensions EDC/ESC Cancellation Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/k/w/kw_suspensions_edc_esc_cancellation_kit_39.jpg KW's EDC/ESC Cancellation Kit is designed to get rid of those annoying dash lights that pop up when upgrading your stock suspension that came with electronically regulated dampers. KW's system shuts down the electronic damper module and the trouble code is avoided. This kit is a simple plug and play solution that can be used without damaging the existing OEM control unit. BR13115 KW Suspensions USD 583.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/chevrolet-camaro-ss-6th-gen-kw-suspensions-edc-esc-cancellation-kit.html


