My Cart
Search
Menu
Search
Searching
Shop by Vehicle
Account
 
Save now on air suspension for your car
Save on Air SuspensionGet the code
 
FREE SHIPPING* to the Continental US
 
Bag Riders Super Low Air Suspension
Bag Riders Super Low Air Suspension
 
 
Buy Now, Pay Later with 0% APR Financing
0% APR Financing Options Available!
 
Select Your Vehicle
Tesla Model Y 1st Gen (2020-2026) RWD Products Browse a collection of compatible products for the Tesla Model Y 1st Gen (2020-2026) RWD en

Tesla Model Y 1st Gen RWD 2020-2026

find air ride suspension kits for your car

Here you'll find a full range of air suspension parts that are specifically designed to fit your Tesla Model Y 1st Gen (2020-2026). From all-in-one complete air ride kits that have everything you need to bag your Tesla Model Y, to individual parts and pieces like control arms and camber plates. Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to bag your Tesla Model Y 1st Gen (2020-2026) on a budget.

Tesla Model Y 1st Gen (2020-2026) RWD Products A collection of products compatible with the Tesla Model Y 1st Gen (2020-2026) RWD

Air Ride Kits

    Air Ride Kits
  1. Bag Riders Manual Air Ride Kit for Tesla Model 3
    Bag Riders Manual Air Ride Kit for Tesla Model 3 & Y RWD
    Rating:
    100%
    100 8
    $2,770.00
    Bag Riders Manual Air Ride Kit for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/639/bag-riders-manual-air-ride-kit-smoothie-101725.jpg The Bag Riders Manual Air Ride Kit for the {vehicle_name} is one of the most reliable air management options due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Ride Kit is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup. Bag Riders Manual Management Includes: (4) Manual Paddle Valves with Mounting Plate Aluminum Air Tank of your choice FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice 40A Relay(s) for your compressor(s) Relay Wiring Kit(s) Inflation Valve 110-145 PSI Pressure Switch Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved 1/4' Air Line (2) PTC Union Y Fittings 100% Free Technical Support - The Industry's Best! {Tesla 3} Bag Riders Manual Air Ride Kit Bag Riders USD 2770.00 https://schema.org/NewCondition https://schema.org/InStock
  2. Slam Specialties analog control system, with smoothie tank, black 444c, and Super Low suspension
    Slam Specialties Analog Air Ride Kit for Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $3,425.00
    Slam Specialties Analog Air Ride Kit for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/640/slam-specialties-analog-complete-air-ride-kit-tmp.jpg This Slam Specialties Analog Air Ride Kit for the {vehicle_name} is a basic, no-frills setup that allows for individual 4 corner and paired controls of your air suspension. Great for someone who doesn't want presets or wants a more old school for their setup. {Tesla 3} Slam Specialties Analog Air Ride Kit Slam Specialties USD 3425.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Bag Riders PRO Air Ride Kit for Tesla Model 3 & Y RWD
    Bag Riders PRO Air Ride Kit for Tesla Model 3 & Y RWD
    Rating:
    100%
    100 4
    $3,590.00
    Bag Riders PRO Air Ride Kit for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2504/bag-riders-pro-complete-air-ride-kit-smooth-101725.jpg The Bag Riders PRO Control system for the {vehicle_name} is a pressure based digital management that includes the features you have come to expect from any modern air ride management at a price that won't break the bank. Our PRO control system allows for 3 user-programmable pressure presets in addition to a dedicated all-down button. The aluminum controller is backlit and has buttons to manually control each corner, with paired front and rear controls as well. Rise-on-start is a must, but our system also includes air out-on-shutdown functionality as well. This management package will also include your choice of tank and compressor(s) for a fully functioning management system. Just pair it with your favorite air suspension for a complete setup. Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Aluminum, digital controller with backlit screen 2-year limited warranty Bag Riders PRO Management Includes: Bag Riders PRO Control System Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Aluminum Air Tank of your choice Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu) Compressor(s) of your choice Bag Riders Water Trap Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line 100% Free Technical Support - The Industry's Best! Power Kit Options: Single Compressor kits do not require a power kit; it is included with the Bag Riders PRO System Bag Riders PRO Compressor Harness {Tesla 3} Bag Riders PRO Air Ride Kit Bag Riders USD 3590.00 https://schema.org/NewCondition https://schema.org/InStock
  4. AccuAir e-Level+ Air Ride Kit for Tesla Model 3 Y
    AccuAir Air Ride Kit for Tesla Model 3 & Y RWD
    Rating:
    90%
    100 2
    $3,835.00
    AccuAir Air Ride Kit for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/2108/accuair-e-plus-air-ride-kit.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package. Features: 3 programmable heights Visual display of each sensor's height percentage Automatic calibration Air tank pressure readout on the e-Level Plus smartphone app RGB backlighting that allows you to change the color of your ECU Included wiring harness for direct plug-n-play with the ENDO-T and ENDO-VT air tank systems Bluetooth 5.0 Control your air suspension with your smartphone using the e-Level Plus app Compressor status indicator light Over the air updates Battery saver mode that sleeps the system after 24 hours AccuAir e-Level+ Air Management Package Includes: AccuAir e-Level+ System e-Level+ ECU (4) height sensors e-Level+ TouchPad controller (optional) ECU main harness ECU valve harness e-Level+ height sensor harness Digital pressure sensor Aluminum air tank of your choice Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Inflation Valve Air Tank Drain Kit Air Line Cutter Tool (1) 60ft Bundle of DOT Approved Air Line** 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Tesla 3} AccuAir e-Level+ Air Ride Kit AccuAir USD 3835.00 https://schema.org/NewCondition https://schema.org/InStock
  5. Bag Riders PRO Pre-Configured Air Ride Kit
    Bag Riders PRO Pre-Configured Air Ride Kit - Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $4,415.00
    Bag Riders PRO Pre-Configured Air Ride Kit - Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/a/bag-riders-pro-pre-configured-air-ride-suspension-kit_18.jpg This pre-configured Bag Riders PRO air ride kit for the RWD Tesla Model 3 & Model Y is the perfect solution for a first-time buyer, or someone who can't pick between all the options. Designed to take the headache and uncertainty out of buying a complete kit, our pre-configured kits come with our most popular parts pre-selected so that you get a kit that is functional and clean, without being over the top. This pre-configured kit also comes with our drop-in, easy-install mounting board, and includes our manifold pedestal mount for FREE! If you want to customize a kit to your liking, we encourage you to check out our other Air Ride Kits. This Bag Riders kit comes with our PRO Control System which offers digital control, preset pressures, and all the other features you would expect from a modern air suspension controller. We have paired this with our Super Low Air Suspension for the ultimate package, allowing you to drive low, and park even lower. Includes: Bag Riders Super Low Air Suspension Bag Riders PRO Control System - 1/4" Combined ECU/Manifold Bag Riders PRO Controller and Harness Pre-assembled ECU/Manifold Main Harness Compressor wiring harness with pre-wired relay 60 ft bundle of DOT-approved air line ECU/Manifold Mounting Hardware In-line Fuse Holders (with fuses) Wiring Terminals for hassle-free Installation Manifold fitting pack Bag Riders Black Aluminum 4 Gallon Smoothie Air Tank Viair 444C Compressor (Black) Bag Riders Single Compressor Isolator Kit (Black) Bag Riders Water Trap Bag Riders Easy-Install Management Board Bag Riders PRO Manifold Pedestal Mount - Included FREE! All necessary fittings, wiring, and accessories 100% Free Technical Support - The Industry's Best! Super Low Features: Threaded, height-adjustable shock bodies 32 or 36-way adjustable damping (varies by application) Up to 53% thicker rubber air springs for stiffer spring rates Aluminum bag endcaps and brackets Radial bearings on MacPherson struts Extended camber plates on certain applications Limited lifetime warranty PRO Features: Combined ECU and manifold (3) User-definable pressure presets Dedicated All-Down button Rise-on-start and air out-on-shutdown functionality Manual mode for individual and paired air spring control Digital, aluminum controller with backlit screen 2-year limited warranty BR27201 Bag Riders USD 4415.00 https://schema.org/NewCondition https://schema.org/InStock
  6. AccuAir ENDO Air Ride Kit for Tesla Model 3 & Y RWD
    AccuAir ENDO Air Ride Kit for Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $4,850.00
    AccuAir ENDO Air Ride Kit for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/air_ride_kits/3002/accuair-endo-air-ride-kit-height-sensor.jpg The e-Level+ from AccuAir for the {vehicle_name} is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-T and ENDO-VT air tank systems allow for one of the cleanest management setups on the market. If you're looking for a more traditional approach without the ENDO tank, be sure to check out our standard AccuAir Air Management Package. Features: 3 programmable heights, plus a dedicated all-down button Visual display of each sensor's height percentage in the ePlus app Automatic calibration Control your air suspension with your smartphone using the ePlus app Air tank pressure readout on the ePlus app RGB backlighting that allows you to change the color of your ECU Battery saver mode that sleeps the system after 24 hours Bluetooth 5.0 Over the air updates Compressor status indicator light via optional Touchpad+ Upgrade Includes: e+ Connect wireless controller AccuAir e+ ECU ECU wiring harness Valve wiring pigtail Digital pressure sensor ePlus smartphone app Mounting hardware Height+ Upgrade (4) Height sensors & linkage Height sensor harness TouchPad+ Upgrade (optional) Touchpad+ physical controller Touchpad harness ENDO-VT valve tank in 3 or 5 gallon Compressor(s) of your choice 40amp Relay(s) for your compressor(s) Relay wiring kit(s) Air Tank Drain/Emergency Fill Valve (1) 60ft Bundle of DOT Approved Air Line** Air Line Cutter Tool 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers {Tesla 3} AccuAir ENDO Air Ride Kit AccuAir USD 4850.00 https://schema.org/NewCondition https://schema.org/InStock

Air Suspension

    Air Suspension
  1. Maxload Rear Air Suspension without Shocks
    Maxload Rear Air Suspension for Tesla Model 3 & Y RWD (No Shocks)
    Rating:
    0%
    100 0
    $600.00
    Maxload Rear Air Suspension for Tesla Model 3 & Y RWD (No Shocks) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-rear-bags-actual-product-not-displayed_13.jpg Looking to switch over from coilovers to air suspension on your Tesla Model 3 & Y RWD, but don't want to purchase a completely new suspension system? With the Maxload Rear Air Suspension kit, you can swap the standalone coil springs from rear of your car for these vehicle specific mounting brackets and air springs. These double bellow bags will allow you to slam your vehicle when parked, and you can combine this rear kit with conversion bags for your front struts to complete the package while keeping your current coilovers. Kit Includes: (2) MAXLOAD double bellow bags with integrated mounting brackets (2) 1/4” compression fittings Anodized end caps All required hardware for installation Free technical support BR18536 MAXLOAD USD 600.00 https://schema.org/NewCondition https://schema.org/InStock
  2. Super Low Front Suspension by Bag Riders for Tesla Model 3 Y RWD
    Bag Riders Super Low Front Air Suspension for Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $1,195.00
    Bag Riders Super Low Front Air Suspension for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/e/tesla-model-3-rwd-super-low-air-suspension-front.jpg The Super Low front air suspension for the Tesla Model 3 RWD is manufactured by Bag Riders with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 32-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with rubber up to twice as thick as competitors bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low by Bag Riders: Built to Drive Low Kit Includes: (2) Super Low front shocks with 1/8" port single bellow air springs (2) Black, anodized aluminum, braided leader lines 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% free technical support, from the industry's best BR17426 Bag Riders USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Super Low Rear Suspension by Bag Riders for Tesla Model 3 Y
    Bag Riders Super Low Rear Air Suspension for Tesla Model 3 & Y
    Rating:
    0%
    100 0
    $1,195.00
    Bag Riders Super Low Rear Air Suspension for Tesla Model 3 & Y https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/e/tesla-model-3-super-low-rear-kit.jpg The Super Low rear air suspension for the Tesla Model 3 & Y is manufactured by Bag Riders with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 32-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with 75% thicker rubber than typical bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low by Bag Riders: Built to Drive Low Kit Includes: (2) Super Low rear shocks (2) 1/4" port single bellow air springs, preassembled with mounting brackets 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% free technical support, from the industry's best BR17428 Bag Riders USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  4. Maxload Air Suspension for Tesla Model 3
    Maxload Air Suspension for Tesla Model 3 & Y RWD
    Rating:
    0%
    100 0
    $1,800.00
    Maxload Air Suspension for Tesla Model 3 & Y RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/m/a/maxload-front-and-rear-product-not-displayed_3_1_1_1_1_1_1_1_2_1_1_1_1_1_1_1_1.jpg Looking for some quality air suspension for the Tesla Model 3 & Y RWD without paying a premium? Well, Maxload has you covered with an affordable cost of entry and premium features like 32-way adjustable damping and fully adjustable, threaded shock bodies, Maxload ensures that you aren't missing out on the enjoyment of air ride. Kit Includes: Maxload front air suspension Maxload rear air suspension (4) 1/4” tube - 1/8” NPT compression elbows (4) Damping adjustment knobs Spanner wrench Up to (4) leader lines, when applicable BR18163 MAXLOAD USD 1800.00 https://schema.org/NewCondition https://schema.org/InStock
  5. d2_racing_wishbone-sleeve_and_ss_s-db
    D2 Racing Air Ride Suspension Kit
    Rating:
    0%
    100 0
    $2,250.00
    D2 Racing Air Ride Suspension Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/e/tesla-d2-air-suspension-2_1.jpg This suspension kit from D2 Racing features fully threaded, 36-way damping adjustable strut bodies to dial in the perfect height and ride quality of your vehicle. Kit Includes: D2 Racing front suspension D2 Racing rear suspension (4) 1/4” tube - 1/8” BSPT compression elbows (2) Spanner tools (4) Damping adjustment knobs BR15562 D2 Racing USD 2250.00 https://schema.org/NewCondition https://schema.org/InStock
  6. Tesla Model 3 Y RWD Super Low Air Suspension Kit by Bag Riders
    Bag Riders Super Low Air Suspension for Tesla Model 3 RWD
    Rating:
    0%
    100 0
    $2,390.00
    Bag Riders Super Low Air Suspension for Tesla Model 3 RWD https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/e/tesla-model-3-rwd-super-low-air-suspension-front-rear.jpg This four-corner Bag Riders Super Low air suspension for the Tesla Model 3 RWD is manufactured with one goal in mind, Drive Lower. Every kit undergoes extensive development and testing at our Vermont headquarters to ensure that Super Low can provide a more aggressive ride height and sportier feel than traditional air suspension. All kits include the standard features you've come to expect, including threaded shock bodies, 32-way adjustable damping, and either single bellow or sleeve air springs that deliver up to 50% higher spring rates at lower heights when compared to competitive offerings. Aiming to raise the bar for modern air suspension, Super Low also utilizes aluminum bag end caps and brackets designed in-house, air springs made in the USA with 75% thicker rubber than typical bags, radial bearings on MacPherson struts to improve service life, and camber plates with more negative adjustment when applicable. All kits are backed by a lifetime warranty to the original purchaser so you can be confident in the longevity of your suspension. Super Low Suspension Kit Includes: (2) Super Low front shocks with 1/8" port single bellow air springs (2) Black, anodized aluminum, braided leader lines (2) Super Low rear shocks (2) 1/4" port single bellow air springs, preassembled with mounting brackets 1/4” & 3/8" PTC DOT approved fittings All required hardware for installation QR code with installation tips and tricks Limited lifetime warranty 100% Free Technical Support - The Industry's Best! BR17463 Bag Riders USD 2390.00 https://schema.org/NewCondition https://schema.org/InStock
  7. universal_air_solution_series_apnd
    Universal Air Solution Series Suspension Kit
    Rating:
    0%
    100 0
    $2,857.96
    Universal Air Solution Series Suspension Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/u/n/universal_air_solution_series_apnd_1__2_1_1_2_1_1_1_2_2_2.jpg The Solution Series from Universal Air is a vehicle specific complete air spring and strut package that increases comfort, boosts performance, and fits perfectly. Universal Air's Solution Series solves the issue of aftermarket suspensions being too fat or too tall for an application. Air House 2s and progressive sleeve style bags provide you with the ultimate travel range, ride quality, and clearance. Features: Air House 2 bags that allow for extremely low compressed height and extended travel, while still maintaining clearance from tires and other suspension components Progressive sleeve style air springs specifically designed for narrow suspension clearances Proprietary threaded dampers - stiff enough to maintain high performance levels, and relaxed enough to provide an enjoyable ride Completely bolt in - easy install without any advanced modification to your vehicle Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for added comfort. Sealed rotary thrust bearings, designed to keep dirt and moisture out of the assembly 6061-T6 aluminum and hard anodized bag end caps for ultimate durability Includes: Universal Air Solution Series front suspension Universal Air Solution Series rear suspension Spanner tool Fittings BR13336 Universal Air USD 2857.96 https://schema.org/NewCondition https://schema.org/InStock

Coilovers

    Coilovers
  1. D2 Racing RS Series Coilover Kit D-TE-01-RS
    D2 Racing RS Series Coilover Kit D-TE-01-RS
    Rating:
    0%
    100 0
    $1,170.00
    D2 Racing RS Series Coilover Kit D-TE-01-RS https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_coilovers_front_camber_rear_strut_12_1_1_1_2_1_2_1_1_1_1_1_1_1_1_1_1_1.jpg The D2 Racing RS Series Coilover Kit D-TE-01-RS features a 36 way damping and rebound adjustable monotube design. These D2 Racing coilovers are perfect for the modified street car that also sees occasional track days. The D2 Racing RS Series Coilover Kit D-TE-01-RS has separate height and preload adjustments, allowing for optimal suspension tuning while maintaining full strut travel at all times. Features: 36 way damping adjustable monotube shock assemblies Full ride height adjustability with separate spring preload Anodized finish and Teflon coated threads to prevent rust 1 year warranty Serviceable in the USA Includes: D2 Racing front suspension D2 Racing rear suspension (2) Spanner tools BR15587 D2 Racing USD 1170.00 https://schema.org/NewCondition https://schema.org/InStock
  2. Tesla Model 3 1st Gen RWD BC Racing BR Type Coilover Kit
    BC Racing BR Type Coilover Kit
    Rating:
    0%
    100 0
    $1,195.00
    BC Racing BR Type Coilover Kit https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc_racing_coilovers_double_wishbone_sep_spring_shock_4.jpg These BR Type coilovers from BC Racing can also be used in conjunction with VERA double bellow and sleeve style bags. Simply remove the spring from the coilover body and thread on a set of VERA bags. Thinking about selling your car and transferring your air setup to the next one? Throw the springs back on the coilovers and move the VERA bags over to your next car! BC Racing BR Type Coilover Kit Mono-tube shock design Linear piston and damping curve Height adjustment via shock body 30 way damping adjustment Custom spring rates and valving available (call to order) 1 year warranty against manufacturer defects VERA bags VERA Slim Double Bellow Bags VERA Double Bellow Bags VERA Sleeve Style Bags BR16923 BC Racing USD 1195.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Tesla Model 3 1st Gen RWD BC Racing BR Coilover Kit Extreme Low
    BC Racing BR Type Coilover Kit (Extreme Low)
    Rating:
    0%
    100 0
    $1,345.00
    BC Racing BR Type Coilover Kit (Extreme Low) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/b/c/bc_racing_coilovers_double_wishbone_sep_spring_shock_1_1.jpg These Extreme Low coilovers from BC Racing are a shorter version of BC's BR Type coils and can also be used in conjunction with VERA double bellow and sleeve style bags. Simply remove the spring from the coilover body and thread on a set of VERA bags. Thinking about selling your car and transferring your air setup to the next one? Throw the springs back on the coilovers and move the VERA bags over to your next car! BC Racing BR Type Coilover Kit (Extreme Low) Mono-tube shock design Linear piston and damping curve Height adjustment via shock body 30 way damping adjustment Custom spring rates and valving available (call to order) 1 year warranty against manufacturer defects VERA bags VERA Slim Double Bellow Bags VERA Double Bellow Bags VERA Sleeve Style Bags BR16924 BC Racing USD 1345.00 https://schema.org/NewCondition https://schema.org/InStock

Lowering Springs

    Lowering Springs
  1. Tesla Model 3 1st Gen D2 Racing Lowering Springs
    D2 Racing Lowering Springs
    Rating:
    0%
    100 0
    $240.00
    D2 Racing Lowering Springs https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/d/2/d2_racing_lowering_springs_11_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1.jpg Want to lower your car, but on a budget? D2's lowering springs will be the easiest way to get that lower ride height without breaking the bank. These lowering springs are a direct replacement for your factory springs and are designed to work with your factory dampers. BR14510 D2 Racing USD 240.00 https://schema.org/NewCondition https://schema.org/InStock

Control Arms

    Control Arms
  1. TruHart_TH-T204
    TruHart Rear Camber Arms (Center Upper)
    Rating:
    0%
    100 0
    $198.00
    TruHart Rear Camber Arms (Center Upper) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart_th-t204.jpg Truhart's rear camber kit allows you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber kit offers an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR15298 Truhart USD 198.00 https://schema.org/NewCondition https://schema.org/InStock
  2. TruHart Rear Trailing Arms
    TruHart Rear Trailing Arms
    Rating:
    0%
    100 0
    $198.00
    TruHart Rear Trailing Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart-rear-trailing-arm-kit-th-t104-.jpg These trailing arms from Turhart feature hard rubber bushings that eliminate the soft oem rubber bushings that allow unpredictable play and movement in your suspension. The hard rubber bushings on these trailing arms allow the driver to get a more direct feel for the car and increase the responsiveness of the vehicle. BR15297 Truhart USD 198.00 https://schema.org/NewCondition https://schema.org/InStock
  3. Tesla Model 3 TruHart Rear Toe Arm Kit
    TruHart Rear Toe Arms
    Rating:
    0%
    100 0
    $198.00
    TruHart Rear Toe Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart_th-t205.jpg This rear toe arm kit from Truhart is designed to bring your alignment back into spec after lowering your Tesla Model 3. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR15299 Truhart USD 198.00 https://schema.org/NewCondition https://schema.org/InStock
  4. TruHart_TH-T206
    TruHart Rear Camber Arms (Front Upper)
    Rating:
    0%
    100 0
    $198.00
    TruHart Rear Camber Arms (Front Upper) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/r/truhart_th-t206.jpg Truhart's rear camber kit allows you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber kit offers an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR15300 Truhart USD 198.00 https://schema.org/NewCondition https://schema.org/InStock
  5. Truhart Rear Camber Arms for Tesla Model 3
    Truhart Rear Camber Arms (with Pillowball)
    Rating:
    0%
    100 0
    $234.00
    Truhart Rear Camber Arms (with Pillowball) https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/h/th-t204-pb.jpg Truhart's rear camber arms allow you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber arms offer an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR18203 Truhart USD 234.00 https://schema.org/NewCondition https://schema.org/InStock
  6. TruHart Front Camber Arms
    Truhart Front Camber Arms
    Rating:
    0%
    100 0
    $630.00
    Truhart Front Camber Arms https://www.bagriders.com/media/catalog/product/cache/439c27ae68db3aa2c9619e8f902649db/t/h/th-t203__08378.jpg Truhart's front camber arms allow you to dial in the alignment of your lowered vehicle to ensure you have the most control possible. Made from machine welded, high quality steel and hardened rubber bushings, Truhart's camber arms offer an unparalleled amount of adjustment. From street to track, Truhart’s specially engineered suspension products give you the control and adjustability needed for a race ready vehicle. BR17734 Truhart USD 630.00 https://schema.org/NewCondition https://schema.org/InStock
Description

Air Ride Suspension for your Tesla Model Y 1st Gen (2020-2026)

It's time to bag your Tesla Model Y 1st Gen (2020-2026). Bag Riders offers a full range of air suspension parts and pieces that are specifically designed to fit your Tesla Model Y. From complete air ride kits that have everything you need from the air management to the air suspension itself, to parts like control arms and camber plates - Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to get your Tesla Model Y set up with air suspension on a budget.

Air ride suspension doesn't need to be complicated and that's where Bag Riders comes in. Our huge selection of air ride products, our unbeatable customer service, and our built in house complete air ride kits and management packages mean you can get that custom air ride kit of your dreams with ease. Bag Riders is here to make sure you have the best air ride experience possible. Not sure where to start? Reach out, ask us all the questions, and let us help you get your Tesla Model Y 1st Gen (2020-2026) on air suspension.

 

RELATED VIDEOS

 
 

CHECK THIS OUT

 
New to Air Suspension?
Rep Bag Riders Merch
Stay Informed
 

CUSTOMER REVIEWS

 
“
Honestly the best customer service from any company I purchased from. I will recommend Bag Riders to anyone I know that mods vehicles.
“
“
If you're thinking about getting an air ride setup for your vehicle, look no further. Bag Riders will get you setup with everything you need, and then some.
“
“
The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders! The best customer service I’ve ever had! I called them and within seconds I was connected to a customer service representative. I highly recommend Bag Riders!
“
“
Not only are the quality of Bag Rider’s products incredible, but their customer service is second to none. I have never had such a positive, helpful experience!
“
 

VISIT US ON