Maxload P2 Air Ride Kit for Ford Mustang 1967-1970

Maxload P2

P2 from MAXLOAD is a pressure-based control system that features their unique rotary dial controller. It has 5 customizable presets, and can be upgraded with their HP2 height sensor kit for even more accurate presets. It also has other features you'd expect from a modern air suspension controller including individual, 4-corner control, pressure readouts, rise-on-start, and a free smartphone app that mimics the look of the rotary controller.

Front Suspension

RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design

Stock: Ships from Supplier

Make a Selection

Front Upper Control Arms

These front upper control arms from RideTech feature a cross shaft that lowers the overall pivot point of the arm which in turn increases the camber gain and helps keep the tire flat on the ground through hard corners. What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped oem control arms detract from all that work

Stock: Ships from Supplier

Make a Selection

Front Lower Control Arms

These front lower control arms from RideTech use an eccentric eliminator that had multiple positions that can be used when aligning the car. Once these control arms are set, you don't have to worry about your alignment moving again

Stock: Ships from Supplier

Make a Selection

Rear Suspension

RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design

Requires the RideTech Bolt-On 4-Link Rear Kit for proper installation.

Stock: Ships from Supplier

Make a Selection

Bolt-On 4-Link Rear (Required)

RideTech Bolt-On 4-Link Rear Kit The RideTech Bolt-On 4-Link installs onto the OEM leaf spring mounts of your prized muscle car.

Stock: Ships from Supplier

Make a Selection

System & Air Line

This will show the stock of the system itself and the line size of your choice. 1/4" air line causes your vehicle to move up and down at a smoother and slower rate when compared to faster 3/8" lines. 1/4" air lines also have the benefit of being easier to install than 3/8" lines because of their smaller diameter and added flexibility.

Stock: Restock in Progress

Make a Selection

HP2 Height Sensor Upgrade

None for me, thanks!

Stock: Make a Selection

Make a Selection

Air Tank

This 4 gallon tank is one of the most popular options, and for good reason. Air tank volume can be personal preference but the 4 gallon tank is the best middle of the road size. Not too big, not too small. The perfect size for starting out.

Stock: In Stock

Make a Selection

Compressor

The Viair 444C compressor is one of the most popular compressors in the air suspension community. The 444C is a great mid-range compressor and one of the best bangs for your buck. Not too loud, not too slow, and rated for 200 PSI.

Stock: In Stock

Make a Selection

Upgraded Compressor Check Valve

None for me, thanks!

Stock: Make a Selection

Make a Selection

Compressor Silencers

None for me, thanks!

Stock: Make a Selection

Make a Selection

Pedestal Mounts

None for me, thanks!

Stock: Make a Selection

Make a Selection

The Maxload P2 for the Ford Mustang 1967-1970 is a digital, pressure-based management that features 5 programmable presets as well as individual, four corner, air spring control. In addition, it can be upgraded to a height- based HP2 management with the HP2 upgrade. P2's unique rotary dial controller gives you quick access to any of your presets with a twist of the outer ring or you can interface with the touchscreen for other selections. The P2 also supports voice commands, but must be unlocked first by saying "Hey Maxload" in order to avoid unintentional inputs. Maxload offers a free smartphone app to control your suspension from your phone as well.

If you're looking for a more traditional approach with a more typical controller, be sure to check out our Bag Riders PRO Management Package.

Features:

5 programmable pressure-based presets
Upgradable to HP2 for height-based presets
Rotary dial controller, with touchscreen & voice commands
Tank pressure readout with visual representation
Individual, 4-Corner control
Visual representation of each bag's travel
Automatic calibration
Rise-on-start functionality
Customizable minimum ride reight, and lockable controls to prevent unwanted adjustments while driving

Includes:

P2 Air Management system
- P2 Manifold
- P2 Rotary Controller
- Main Wiring Harness
- Compressor Wiring Harness
- Mounting hardware
OPTIONAL HP2 Upgrade
- (4) Height sensors & linkage
- (4) Height sensor harnesses
- HP2 Hub & wiring harness
Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Water Trap kit
Manifold fitting pack
(1) 60ft Bundle of DOT Approved Air Line
Air Line Cutter Tool
100% FREE technical support - the industry's best!

Ford Mustang 1st Gen Late Term (1967-1970) RWD

Customer Reviews

5 Star

(0)

4 Star

(0)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Write Your Own Review

Maxload P2 Air Ride Kit for Ford Mustang 1967-1970

Selections

Details

Applications

Reviews








Tell us about your Vehicle: